2902017

https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. push-in connection technology, standard configuration Product Description Configurable, 3-way isolated potentiometer measuring transducer with plug-in connection technology. The measured values are converted into a linear and freely adjustable current or voltage signal. You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see configuration table). If it is not possible to fully utilize the potentiometer range, you can specify the upper and lower potentiometer values in the software. The measuring transducer supports fault monitoring and NFC communication. Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356649568 Weight per Piece (excluding packing) 108.900 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 110.5 mm Depth 120.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C 04/16/2018   Page 1 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 85 °C Input data Potentiometer 100 Ω ... 100 kΩ Output data Voltage output signal 1 V ... 5 V (via DIP switch) 10 V ... 0 V (via DIP switch) 0 V ... 5 V (via DIP switch) 0 V ... 10 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Current output signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 20 mA ... 0 mA (via DIP switch) 20 mA ... 4 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Max. voltage output signal approx. 12.3 V Max. current output signal 24.6 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output ≤ 600 Ω (at 20 mA) Power supply Supply voltage 24 V DC 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Current consumption 33 mA (24 V DC) 68 mA (12 V DC) Connection data Single conductor/terminal point, solid, with ferrule, min. 0.14 mm² Single conductor/terminal point, solid, with ferrule, max. 2.5 mm² Single conductor/terminal point, solid, without ferrule, min. 0.14 mm² Single conductor/terminal point, solid, without ferrule, max. 2.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Stripping length 10 mm Connection method Push-in connection General Maximum transmission error < 0.1 % (R < 240 Ω = < 0,2 %) 04/16/2018   Page 2 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Technical data General Maximum temperature coefficient 0.01 %/K Temperature coefficient, typical 0.01 %/K Step response (10-90%) < 60 ms Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Housing material PBT Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 0.2 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 0.4 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 0.2 % Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T5 Class I, Zone 2, Group IIC T5 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 04/16/2018   Page 3 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram OUT IN Sensor / Field Pictogram S-Port 1 1 2 2 3 3 IN PLC / DCS TI+ 5 + OUT U, I+ active 5 passive 6 – OUT U, I– IN PWR+ IN 4 6 7 + PWR– IN 8 – FM R U,I OUT PWR– PWR+ FM POWER Zone 2 Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 04/16/2018   Page 4 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Classifications UNSPSC UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / GL / cULus Listed Ex Approvals ATEX / UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 GL    http://exchange.dnv.com/tari/  14445-15 HH cULus Listed       Accessories Accessories Communication module Communication module - MINI MCR-2-V8-MOD-RTU - 2905634 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a Modbus/RTU network via a communication adapter.     04/16/2018   Page 5 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories Communication module - MINI MCR-2-V8-MOD-TCP - 2905635 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a Modbus/TCP network via a communication adapter.     Communication module - MINI MCR-2-V8-PB-DP - 2905636 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a PROFIBUS DP network via a communication adapter.     Device marking Marker for end clamp - UCT-EM (30X5) - 0801505 Marker for end clamp, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Marker for end clamp - UCT-EM (30X5) YE - 0830340 Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Plastic label - UC-EMLP (15X5) - 0819301 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     04/16/2018   Page 6 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories Plastic label - UC-EMLP (15X5) YE - 0822615 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) SR - 0828095 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) - 0828790 Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) YE - 0828873 Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) SR - 0828874 Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     DIN rail connector 04/16/2018   Page 7 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Evaluation unit Monitoring module - MINI MCR-2-FM-RC - 2904504 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration     Monitoring module - MINI MCR-2-FM-RC-PT - 2904508 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration     Labeled device marker Marker for end clamp - UCT-EM (30X5) CUS - 0801589 Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348 Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     04/16/2018   Page 8 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories Plastic label - UC-EMLP (15X5) CUS - 0824550 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) YE CUS - 0824551 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) SR CUS - 0828099 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) CUS - 0830076 Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) YE CUS - 0830077 Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     04/16/2018   Page 9 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories Plastic label - US-EMLP (15X5) SR CUS - 0830078 Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Power module Power terminal block - MINI MCR-2-PTB - 2902066 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology     Power terminal block - MINI MCR-2-PTB-PT - 2902067 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     Programming adapter 04/16/2018   Page 10 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories Adapter - IFS-BT-PROG-ADAPTER - 2905872 Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog, MINI Analog Pro, MACX Analog, INTERFACE system gateways, and PLC logic device series.     Programming adapter - IFS-USB-PROG-ADAPTER - 2811271 Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers.     Programming adapter - TWN4 MIFARE NFC USB ADAPTER - 2909681 Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFCcapable products from PHOENIX CONTACT with software. No separate USB driver is required.     System adapter System adapter - MINI MCR-2-V8-FLK 16 - 2901993 Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.     Terminal marking Marker strip - SK 5,0 WH:REEL - 0805221 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 5 mm     04/16/2018   Page 11 / 12 https://www.phoenixcontact.com/gb/products/2902017 Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Accessories DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439 DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to EN 60715     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 12 / 12