2902028

https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration. Product Description Configurable, freely adjustable 4-way signal conditioner with switching output and plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. Current signals between 0 mA ... 24 mA and voltage signals between 0 V ... 12 V can be processed on the input side. Signals between 0 mA ... 21 mA and 0 V ... 10.5 V are possible on the output side. The minimum measuring span is 1 mA and 0.5 V. Full accuracy is maintained with a measuring span greater than 10 mA and 5 V. You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see configuration table). The measuring transducer supports fault monitoring and NFC communication. Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356649698 Weight per Piece (excluding packing) 100.000 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 109.81 mm Depth 119.2 mm 07/04/2020   Page 1 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Degree of protection IP20 (not assessed by UL) Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Number of inputs 1 Configurable/programmable Yes Voltage input signal 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 1 V ... 5 V (via DIP switch) 10 V ... 0 V (via DIP switch) 10 V ... 2 V (via DIP switch) 5 V ... 0 V (via DIP switch) 5 V ... 1 V (via DIP switch) 0 V ... 12 V (can be set via software) Current input signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 2 mA ... 10 mA (via DIP switch) 20 mA ... 0 mA (via DIP switch) 20 mA ... 4 mA (via DIP switch) 10 mA ... 0 mA (via DIP switch) 10 mA ... 2 mA (via DIP switch) 0 mA ... 24 mA (can be set via software) max. input voltage 12 V Max. input current 24 mA Input resistance of voltage input > 120 kΩ Input resistance current input approx. 50 Ω (+ 0.7 V for test diode) Output data Number of outputs 1 Configurable/programmable Yes Voltage output signal 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 07/04/2020   Page 2 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Technical data Output data 1 V ... 5 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Current output signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 2 mA ... 10 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Max. output voltage approx. 12.3 V Max. output current 24.6 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output ≤ 600 Ω (at 20 mA) Ripple < 20 mVPP (at 600 Ω) < 20 mVPP (at 600 Ω) Switching output Output name Switching output Number of outputs 1 Contact type 1 N/O contact Minimum switching voltage 1V Maximum switching voltage 30 V DC Min. switching current 100 µA Max. switching current 100 mA (at 30 V) Power supply Nominal supply voltage 24 V DC Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Typical current consumption 32 mA (24 V DC) 63 mA (12 V DC) Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load) Connection data Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule) 0.14 mm² ... 2.5 mm² (without ferrule) Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 (flexible) 07/04/2020   Page 3 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Technical data General No. of channels 1 Maximum transmission error 0.1 % (of final value) Maximum temperature coefficient 0.01 %/K Temperature coefficient, typical 0.01 %/K Step response (10-90%) approx. 140 ms (15 Hz sample rate) approx. 45 ms (60 Hz sample rate) approx. 25 ms (240 Hz sample rate) Status display Yellow LED (switching output) Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Overvoltage category II Degree of pollution 2 Rated insulation voltage 300 V (effective) Test voltage, input/output/supply 3 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color gray Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 0.2 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 0.1 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 2.8 % Standards and Regulations Electromagnetic compatibility Conformance with EMC directive 07/04/2020   Page 4 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Technical data Standards and Regulations Noise emission EN 61000-6-4 Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 DNV GL-Temperature B DNV GL-Humidity B DNV GL-Vibration A DNV GL-EMC A DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board Conformance/approvals Designation CE Identification CE-compliant Designation ATEX Identification  II 3 G Ex nA IIC T4 Gc X Designation UL, USA/Canada Identification UL 508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 Temperature B Humidity B Vibration A EMC A Enclosure Required protection according to the Rules shall be provided upon installation on board Environmental Product Compliance REACh SVHC Lead 7439-92-1 07/04/2020   Page 5 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram 07/04/2020   Page 6 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Pictogram Classifications eCl@ss eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 ETIM 7.0 EC002653 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121008 UNSPSC 18.0 39121008 07/04/2020   Page 7 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Classifications UNSPSC UNSPSC 19.0 39121008 UNSPSC 20.0 39121008 UNSPSC 21.0 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / DNV GL / cULus Listed Ex Approvals ATEX / UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 DNV GL    https://approvalfinder.dnvgl.com/  TAA000021E cULus Listed       Accessories Accessories Communication module 07/04/2020   Page 8 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Communication module - MINI MCR-2-V8-MOD-RTU - 2905634 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a Modbus/RTU network via a communication adapter.     Communication module - MINI MCR-2-V8-MOD-TCP - 2905635 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a Modbus/TCP network via a communication adapter.     Communication module - MINI MCR-2-V8-PB-DP - 2905636 Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a PROFIBUS DP network via a communication adapter.     Device marking Marker for end clamp - UCT-EM (30X5) - 0801505 Marker for end clamp, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24     Marker for end clamp - UCT-EM (30X5) YE - 0830340 Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24     07/04/2020   Page 9 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Plastic label - UC-EMLP (15X5) - 0819301 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 10     Plastic label - UC-EMLP (15X5) YE - 0822615 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 10     Plastic label - UC-EMLP (15X5) SR - 0828095 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 10     Plastic label - US-EMLP (15X5) - 0828790 Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     Plastic label - US-EMLP (15X5) YE - 0828873 Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     07/04/2020   Page 10 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Plastic label - US-EMLP (15X5) SR - 0828874 Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439 DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to EN 60715     DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Evaluation unit Monitoring module - MINI MCR-2-FM-RC - 2904504 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration     Monitoring module - MINI MCR-2-FM-RC-PT - 2904508 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration     07/04/2020   Page 11 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Labeled device marker Marker for end clamp - UCT-EM (30X5) CUS - 0801589 Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24     Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348 Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24     Plastic label - UC-EMLP (15X5) CUS - 0824550 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) YE CUS - 0824551 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) SR CUS - 0828099 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 10     07/04/2020   Page 12 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Plastic label - US-EMLP (15X5) CUS - 0830076 Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     Plastic label - US-EMLP (15X5) YE CUS - 0830077 Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     Plastic label - US-EMLP (15X5) SR CUS - 0830078 Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels: 189     Power module Power terminal block - MINI MCR-2-PTB - 2902066 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology     Power terminal block - MINI MCR-2-PTB-PT - 2902067 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology     07/04/2020   Page 13 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     Programming adapter Adapter - IFS-BT-PROG-ADAPTER - 2905872 Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog, MINI Analog Pro, MACX Analog, INTERFACE system gateways, and PLC logic device series.     Programming adapter - IFS-USB-PROG-ADAPTER - 2811271 Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers.     Programming adapter - TWN4 MIFARE NFC USB ADAPTER - 2909681 Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFC-capable products from PHOENIX CONTACT with software. No separate USB driver is required.     07/04/2020   Page 14 / 15 https://www.phoenixcontact.com/us/products/2902028 Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Accessories System adapter System adapter - MINI MCR-2-V8-FLK 16 - 2901993 Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.     Terminal marking Marker strip - SK 5,0 WH:REEL - 0805221 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 5 mm, Number of individual labels: 90000     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/04/2020   Page 15 / 15