https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC.
Output voltage: 1.25 V DC ...10 V DC or output current: 2.5 mA ... 20 mA can be set. Configurable via DIP
switch. Push-in connection technology.
Product Description
Constant voltage/current source with plug-in connection technology for generating high-precision constant voltages and constant currents. The input
voltage can be in a range between 9.6 V DC and 30 V DC and optionally applied via the connection terminal blocks of the module or grouped via
the DIN rail connector. The following voltage and current values can be set on the output side: 1.25 V, 2.5 V, 3.75 V, 5 V, 6.25 V, 7.5 V, 8.75 V,
10 V DC, 2.5 mA, 5 mA, 7.5 mA, 10 mA, 12.5 mA, 15 mA, 17.5 mA, 20 mA. You can configure the device via DIP switches. The device supports
fault monitoring and NFC communication.
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356649926
Weight per Piece (excluding packing)
99.000 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
04/16/2018 Page 1 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Technical data
Ambient conditions
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input data
Voltage input signal
9.6 V DC ... 30 V DC
Output data
Configurable/programmable
Yes
Max. output voltage
10 V DC
8.75 V DC
7.5 V DC
6.25 V DC
5 V DC
3.75 V DC
2.5 V DC
1.25 V DC
Max. output current
20 mA
17.5 mA
15 mA
12.5 mA
10 mA
7.5 mA
5 mA
2.5 mA
Output voltage with wire break
13.5 V
Output current
≤ 30 mA
Short-circuit current
> 32 mA
Load/output load current output
≤ 600 Ω (20 mA)
Ripple
< 20 mVPP (at 600 Ω)
Power supply
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail according to
EN 60715))
Typical current consumption
< 42 mA (24 V DC)
< 85 mA (12 V DC)
Power consumption
< 1.1 W (9.6 V DC)
Connection data
Connection method
Push-in connection
Single conductor/terminal point, solid, with ferrule, min.
0.14 mm²
Single conductor/terminal point, solid, with ferrule, max.
2.5 mm²
Single conductor/terminal point, solid, without ferrule, min.
0.14 mm²
Single conductor/terminal point, solid, without ferrule, max.
2.5 mm²
04/16/2018 Page 2 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Technical data
Connection data
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Stripping length
10 mm
General
Maximum transmission error
≤ 0.1 % (of final value)
Maximum temperature coefficient
< 0.01 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be
minimal deviations.
Color
gray
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
GL
GL applied for
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
04/16/2018 Page 3 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Technical data
Standards and Regulations
GL
GL applied for
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Block diagram
OUT
OUT
Sensor / Field
TI+
+ 1
OUT U,I+
PLC / DCS
TI+
5 +
OUT U,I+
– 2
OUT U,I–
OUT U,I–
+ 3
6 –
PWR+
PWR+
– 4
Pictogram
7 +
POWER
PWR-
UCV
ICC
IN
8 –
OUT
PWR-
FM
PWR+
PWR–
FM
Zone 2
Classifications
eCl@ss
eCl@ss 5.0
27049002
eCl@ss 5.1
27049002
eCl@ss 6.0
27049002
eCl@ss 7.0
27049002
eCl@ss 8.0
27049002
eCl@ss 9.0
27040701
ETIM
ETIM 4.0
EC002540
ETIM 5.0
EC002540
ETIM 6.0
EC002540
04/16/2018 Page 4 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Classifications
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
39121004
Approvals
Approvals
Approvals
UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
EAC
RU CDE.A*30.B.01082
cULus Listed
Accessories
Accessories
Device marking
04/16/2018 Page 5 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Marker for end clamp - UCT-EM (30X5) - 0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field
size: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE - 0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier,
lettering field size: 30 x 5 mm
Plastic label - UC-EMLP (15X5) - 0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE - 0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR - 0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
04/16/2018 Page 6 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Plastic label - US-EMLP (15X5) - 0828790
Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE - 0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR - 0828874
Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 15 x 5 mm
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Evaluation unit
Monitoring module - MINI MCR-2-FM-RC - 2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the
FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology,
standard configuration
04/16/2018 Page 7 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Monitoring module - MINI MCR-2-FM-RC-PT - 2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology,
standard configuration
Labeled device marker
Marker for end clamp - UCT-EM (30X5) CUS - 0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Plastic label - UC-EMLP (15X5) CUS - 0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE CUS - 0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
adhesive, lettering field size: 15 x 5 mm
04/16/2018 Page 8 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Plastic label - UC-EMLP (15X5) SR CUS - 0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) CUS - 0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE CUS - 0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR CUS - 0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Power module
Power terminal block - MINI MCR-2-PTB - 2902066
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
04/16/2018 Page 9 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Power terminal block - MINI MCR-2-PTB-PT - 2902067
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
Setpoint potentiometer
Setpoint adjuster - EMG 30-SP- 4K7LIN - 2940252
Setpoint value potentiometer, to set setpoints individually, resistance value 4,7 kΩ
Setpoint adjuster - EMG 30-SP-10K LIN - 2942124
Setpoint value potentiometer, to set setpoints individually, resistance value 10 kΩ
Terminal marking
04/16/2018 Page 10 / 11
https://www.phoenixcontact.com/gb/products/2902065
Constant voltage source - MINI MCR-2-CVCS-PT - 2902065
Accessories
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for
terminal block width: 5 mm, lettering field size: continuous x 5 mm
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according
to EN 60715
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/16/2018 Page 11 / 11
