2902646

https://www.phoenixcontact.com/us/products/2902646 Power supply unit - TRIO-PS/1AC/5DC/10 - 2902646 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/10 A Product Description TRIO POWER power supplies with standard functionality TRIO POWER is particularly suited to standard machine production, thanks to 1- and 3-phase versions up to 960 W. The wide-range input and the international approval package enable worldwide use. The robust metal housing, the high electric strength, and the wide temperature range ensure a high level of power supply reliability. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 800.0 g Custom tariff number 85044030 Country of origin China Technical data Dimensions Width 40 mm Height 130 mm Depth 115 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data 03/13/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2902646 Power supply unit - TRIO-PS/1AC/5DC/10 - 2902646 Technical data Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC (Derating < 90 V AC: 2.5 %/K) Dielectric strength maximum 300 V AC AC frequency range 45 Hz ... 65 Hz Discharge current to PE < 3.5 mA Nominal power consumption > 12 V DC, constant capacity restricted Inrush surge current < 30 A Power failure bypass > 40 ms (120 V AC) > 180 ms (230 V AC) Choice of suitable circuit breakers 6 A ... 16 A (Characteristics B, C, D, K) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 5 V DC ±1 % Setting range of the output voltage (USet) 4.5 V DC ... 6 V DC (> 12 V DC, constant capacity restricted) Nominal output current (IN) 10 A (-25°C ... 55°C) Derating 55 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Max. capacitive load Unlimited Active current limitation Approx. 12 A (in the event of a short-circuit) Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple < 60 mVPP Output power 120 W Typical response time 80 % (230 V AC) Insulation voltage input/output 4 kV AC (type test) 2 kV AC (routine test) Protection class I 03/13/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2902646 Power supply unit - TRIO-PS/1AC/5DC/10 - 2902646 Technical data General MTTF/ MTBF (IEC 61709, SN 29500) > 500000 h Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 9 mm Screw thread M2,5 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 9 mm Screw thread M2,5 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Shock 15g in all directions in acc. with IEC 60068-2-27 Noise immunity EN 61000-6-2:2005 Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 Standard – Electrical equipment of machines EN 60204-1 Standard - Safety of transformers EN 61558-2-17 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) EN 61558-2-17 Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) 03/13/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2902646 Power supply unit - TRIO-PS/1AC/5DC/10 - 2902646 Technical data Standards and Regulations Standard – Safety extra-low voltage EN 60950-1 (SELV) EN 60204 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178 Standard – Limitation of mains harmonic currents EN 61000-3-2 UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950 Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) Low Voltage Directive Conformance with LV directive 2006/95/EC Rail applications EN 50121-4 Classifications eCl@ss eCl@ss 4.0 27040702 eCl@ss 4.1 27040702 eCl@ss 5.0 27242213 eCl@ss 5.1 27049002 eCl@ss 6.0 27049002 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 3.0 EC001039 ETIM 4.0 EC002540 ETIM 5.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals 03/13/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2902646 Power supply unit - TRIO-PS/1AC/5DC/10 - 2902646 Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings Block diagram L N Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/13/2016   Page 5 / 5