2902776

https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) ™ SmartWire DT adapter for CONTACTRON hybrid motor starters, with "Enable" input for safe shutdown up to PLe/SIL3. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 120.0 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Width 22.5 mm Height 165 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Input data Input name Enable input Rated actuating voltage UC 24 V DC Switching level "High" > 19.2 V DC Switching level "Low" < 9.6 V DC Switching level dependent on the switching device Rated actuating current IC 5 mA Status display Green LED (SmartWire bus), green LED (enable OK) 04/26/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Technical data Data interface Designation SmartWire™-DT Data rate 125 kBd / 250 kBd Connection method Pin strip, 8-pos. Current consumption IAUX 120 mA Current consumption IPOW 25 mA Connection data Connection name Enable input Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm² ... 1 mm² Conductor cross section flexible 0.14 mm² ... 1 mm² Conductor cross section AWG 26 ... 18 Number of connections 1 Number of positions 4 Connection data bus connection Connection name SmartWire™-DT Connection method Pin strip Number of connections 1 Number of positions 8 Note For SmartWire-DT device plug SWD4-8SF2-5 PXC General Degree of pollution 2 Overvoltage category III Operating mode 100% operating factor Degree of protection IP20 Color green Mounting position any Assembly instructions On CONTACTRON hybrid motor starter Standards and Regulations Standards/regulations IEC 60947-1 EN 60947-1 Degree of pollution 2 Overvoltage category III 04/26/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Classifications eCl@ss eCl@ss 4.0 27142001 eCl@ss 4.1 27142001 eCl@ss 5.0 27142001 eCl@ss 5.1 27141140 eCl@ss 6.0 27141140 eCl@ss 7.0 27141140 eCl@ss 8.0 27379201 eCl@ss 9.0 27379201 ETIM ETIM 3.0 EC000035 ETIM 4.0 EC000489 ETIM 5.0 EC002498 UNSPSC UNSPSC 6.01 30211915 UNSPSC 7.0901 39121514 UNSPSC 11 39121514 UNSPSC 12.01 39121514 UNSPSC 13.2 39121514 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approvals submitted Approval details 04/26/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Approvals UL Listed  cUL Listed  cULus Listed  Drawings Dimensional drawing 165 EN EN EN 22,5 SWD 114,5 04/26/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Circuit diagram F1 L1 F2 L2 F3 L3 SWD SWD + EN+ EN– – SWD EN SWD AUX EM SWD-ADAPTER GND_E MAN RES AUT CONTACTRON N in1 6/T3 2/T1 4/T2 POW 96 95 97 EU5C SWD-DP PXC L PROFIBUS-DP 5/L3 1/L1 3/L2 Config. US GND R M 3~ PE Wiring example without EMERGENCY STOP 04/26/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2902776 Adapter - EM SWD-ADAPTER - 2902776 Circuit diagram F1 L1 F2 L2 F3 L3 +24V DC GND S22 S12 S21 S11 S1 PSR-SCP-24UC/ESA4/2x1/1x2 A1 A2 13 23 14 24 S33 S34 SWD SWD + EN+ EN– – SWD EN SWD AUX EM SWD-ADAPTER GND_E MAN RES AUT CONTACTRON N in1 6/T3 2/T1 4/T2 POW 96 95 97 EU5C SWD-DP PXC L PROFIBUS-DP 5/L3 1/L1 3/L2 Config. US GND R M 3~ PE EMERGENCY STOP wiring example (two-channel) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/26/2016   Page 6 / 6