2902829

https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP switches, with screw connection technology and standard configuration. Product Description The 6.2 mm wide MINI MCR-SL-UI-I-LP... configurable 2-way isolating amplifier is used to electrically isolate, condition, and filter analog signals. The output loops that supply the loop-powered isolating amplifier enable the isolating amplifier to operate on an active analog input module. The modules are supplied via the current loop of the controller. On the input side, standard analog signals and non-standard analog signals can be connected, starting from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to a 4...20 mA signal. The DIP switches accessible on the housing side enable the configuration of input signal ranges. Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356682350 Weight per Piece (excluding packing) 82.000 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions 04/16/2018   Page 1 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Input data Number of inputs 1 Voltage input signal 0 mV ... 1000 mV 0 mV ... 750 mV 0 mV ... 500 mV 0 mV ... 300 mV 0 mV ... 250 mV 0 mV ... 200 mV 0 mV ... 150 mV 0 mV ... 125 mV 0 mV ... 120 mV 0 mV ... 100 mV 0 mV ... 75 mV 0 mV ... 60 mV 0 mV ... 50 mV 0 V ... 10 V 0 V ... 7.5 V 0 V ... 5 V 0 V ... 3 V 0 V ... 2.5 V 0 V ... 2 V 0 V ... 1.5 V 0 V ... 1.25 V 0 V ... 1.2 V 0 V ... 30 V 0 V ... 25 V 0 V ... 20 V 0 V ... 12.5 V 0 V ... 12 V 0 V ... 15 V -1000 mV ... 1000 mV -750 mV ... 750 mV -500 mV ... 500 mV -300 mV ... 300 mV -250 mV ... 250 mV -200 mV ... 200 mV -125 mV ... 125 mV -120 mV ... 120 mV 04/16/2018   Page 2 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data Input data -150 mV ... 150 mV -100 mV ... 100 mV -75 mV ... 75 mV -60 mV ... 60 mV -50 mV ... 50 mV -10 V ... 10 V -7.5 V ... 7.5 V -5 V ... 5 V -3 V ... 3 V -2.5 V ... 2.5 V -2 V ... 2 V -1.25 V ... 1.25 V -1.2 V ... 1.2 V -1.5 V ... 1.5 V -30 V ... 30 V -25 V ... 25 V -20 V ... 20 V -12.5 V ... 12.5 V -12 V ... 12 V -15 V ... 15 V 200 mV ... 1000 mV 150 mV ... 750 mV 100 mV ... 500 mV 60 mV ... 300 mV 50 mV ... 250 mV 40 mV ... 200 mV 25 mV ... 125 mV 24 mV ... 120 mV 30 mV ... 150 mV 20 mV ... 100 mV 15 mV ... 75 mV 12 mV ... 60 mV 10 mV ... 50 mV 2 V ... 10 V (additional areas can be configured, see table) 1.5 V ... 7.5 V 1 V ... 5 V 0.6 V ... 3 V 0.5 V ... 2.5 V 0.4 V ... 2 V 0.25 V ... 1.25 V 04/16/2018   Page 3 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data Input data 0.24 V ... 1.2 V 0.3 V ... 1.5 V 6 V ... 30 V 5 V ... 25 V 4 V ... 20 V 2.5 V ... 12.5 V 2.4 V ... 12 V 3 V ... 15 V Current input signal 0 mA ... 40 mA 0 mA ... 30 mA 0 mA ... 20 mA 0 mA ... 12 mA 0 mA ... 10 mA 0 mA ... 8 mA 0 mA ... 7.5 mA 0 mA ... 5 mA 0 mA ... 6 mA 0 mA ... 4 mA 0 mA ... 3 mA 0 mA ... 2.5 mA 0 mA ... 2 mA -40 mA ... 40 mA -30 mA ... 30 mA -20 mA ... 20 mA -12 mA ... 12 mA -10 mA ... 10 mA -8 mA ... 8 mA -7.5 mA ... 7.5 mA -5 mA ... 5 mA -6 mA ... 6 mA -4 mA ... 4 mA -3 mA ... 3 mA -2.5 mA ... 2.5 mA -2 mA ... 2 mA 8 mA ... 40 mA 6 mA ... 30 mA 4 mA ... 20 mA 2.4 mA ... 12 mA 2 mA ... 10 mA 1.6 mA ... 8 mA 04/16/2018   Page 4 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data Input data 1.5 mA ... 7.5 mA 1 mA ... 5 mA 1.2 mA ... 6 mA 0.8 mA ... 4 mA 0.6 mA ... 3 mA 0.5 mA ... 2.5 mA 0.4 mA ... 2 mA max. input voltage < 40 V Max. input current < 50 mA (Dielectric strength up to 30 V) Input resistance of voltage input approx. 100 kΩ (At ≤ 1 V, otherwise approximately 1 MΩ) Input resistance current input ≤ 50 Ω Output data Number of outputs 1 Configurable/programmable Yes, preconfigured Current output signal 4 mA ... 20 mA Max. output current 35 mA (output limit) Load/output load current output < 1000 Ω ((UB - 8 V) / 22 mA) Ripple < 20 mVPP (at 500 Ω) Power supply Supply voltage range no separate supply voltage necessary Power consumption 28 mW (without signal) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General No. of channels 1 Maximum transmission error < 0.1 % (of final value) < 0.2 % (Without adjustment) Maximum temperature coefficient 0.01 %/K Temperature coefficient, typical 0.005 %/K Limit frequency (3 dB) approx. 30 Hz Alignment zero ±2% 04/16/2018   Page 5 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data General Alignment span ±2% Step response (10-90%) approx. 16 ms Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage input/output 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T5 Class I, Zone 2, Group IIC Certificate of classification DNV GL 14085-15HH Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 0.5 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 2% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 0.5 % Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 04/16/2018   Page 6 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Technical data Standards and Regulations Comments Criterion B Standards/regulations EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T5 Class I, Zone 2, Group IIC Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram OUT 1 I US + 1 IN I PWR IN PLC / DCS 5 + 5 PWR active passive 4-wire GND 2 OUT 3 U US OUT IN Sensor / Field – 2 + 3 GND OUT I 6 – IN U 6 7 4-wire GND 4 – 4 GND 8 Zone 2 Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 04/16/2018   Page 7 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Classifications eCl@ss eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 ETIM 6.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / GL / cULus Listed Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      EAC-Zulassung 04/16/2018   Page 8 / 9 https://www.phoenixcontact.com/gb/products/2902829 Signal conditioner - MINI MCR-SL-UI-I-LP-NC - 2902829 Approvals GL    http://exchange.dnv.com/tari/  14085-15 HH cULus Listed       Accessories Accessories Marking material Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     System adapter System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268 Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and system cabling with a minimum of wiring and very low error risk.     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 9 / 9