https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for
sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Screw connection, standard
configuration.
Product Description
The configurable 3-way isolated frequency transducer is suitable for the connection of NAMUR proximity sensors (IEC 60947-5-6 and EN 50227) as well
as for sensors with NPN and PNP outputs that generate a frequency signal.
The measured values are converted into a linear current or voltage signal.
The device is configured via DIP switches. Alternatively, the frequency range can be configured with extended options via the teach-in wheel. The
measuring transducer supports fault monitoring.
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356682367
Weight per Piece (excluding packing)
100.000 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
93.1 mm
11/08/2019 Page 1 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Technical data
Dimensions
Depth
102.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Input data
Frequency input
Frequency input
Configurable/programmable
Yes
Frequency measuring range
0.002 Hz ... 20 kHz (DIP switch)
Available input sources
NPN/PNP transistor outputs
NAMUR initiators
Floating relay contact (dry contact)
Max. input amplitude
30 V (incl. DC voltage)
Output data
Output name
Voltage output / current output
Number of outputs
1
Configurable/programmable
Yes
Voltage output signal
0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
10 V ... 0 V
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. output voltage
approx. 12.3 V
Max. output current
24.6 mA
Load/output load voltage output
≥ 10 kΩ
Load/output load current output
500 Ω (at 20 mA)
Ripple
< 20 mVPP
< 20 mVPP (at 500 Ω)
Step response (0–99%)
< 35 ms (At f > 500 Hz)
Power supply
11/08/2019 Page 2 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Technical data
Power supply
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption
< 28 mA (at IOUT = 20 mA, 24 V DC, load 500 Ω)
Power consumption
< 800 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω)
Connection data
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
General
No. of channels
1
Transmission error in the set measuring range
0.1 %
Maximum temperature coefficient
0.01 %/K
Status display
LED red
Operating elements
Press/slide button
Protective circuit
Transient protection
Electrical isolation
Basic insulation according to EN 61010
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
50 V AC/DC
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color
green
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC
11/08/2019 Page 3 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Technical data
General
Certificate of classification
DNV GL 14085-15HH
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
EMC data
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
0.1 %
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
2%
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
0.3 %
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Standards/regulations
EN 61000-4-2
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Electrical isolation
Basic insulation according to EN 61010
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
11/08/2019 Page 4 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
11/08/2019 Page 5 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Pictogram
Classifications
eCl@ss
eCl@ss 4.0
27210100
eCl@ss 4.1
27210100
eCl@ss 5.0
27210100
eCl@ss 5.1
27210100
eCl@ss 6.0
27210100
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
ETIM 7.0
EC002653
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
39121008
11/08/2019 Page 6 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Approvals
Approvals
Approvals
GL / UL Listed / cUL Listed / cULus Listed
Ex Approvals
ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
GL
https://approvalfinder.dnvgl.com/
14085-15 HH
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cULus Listed
Accessories
Accessories
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
11/08/2019 Page 7 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Accessories
Evaluation unit
Monitoring module - MINI MCR-SL-FM-RC-NC - 2902961
The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and to monitor
the supply voltages. The error is reported via an N/O contact. Screw connection, standard configuration.
Monitoring module - MINI MCR-SL-FM-RC-SP-NC - 2902962
The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and monitor
supply voltages. Spring-cage connection, standard configuration. Replacement part: 2904508 MINI MCR-2-FM-RC-PT.
Multiplexer
Multiplexer - MINI MCR-SL-MUX-V8-FLK 16 - 2811815
MINI analog multiplexer, generates one analog output from 8 analog input signals, for MINI analog module with screw
connection.
Power module
Power terminal block - MINI MCR-SL-PTB-FM - 2902958
The MINI MCR-SL-PTB-FM(-SP) power terminal block is used to supply the supply voltage to the DIN rail connector.
The FM power terminal block offers the additional function of monitoring in combination with the fault monitoring module.
Screw connection.
11/08/2019 Page 8 / 9
https://www.phoenixcontact.com/us/products/2902832
Frequency transducer - MINI MCR-SL-F-UI-NC - 2902832
Accessories
Power terminal block - MINI MCR-SL-PTB-FM-SP - 2902959
The MINI MCR-SL-PTB-FM(-SP) feed-in terminal is used to feed in the supply voltage to the DIN rail connector. The
FM feed-in terminal offers an additional function: monitoring. Spring-cage connection. Replacement part: 2902067 MINI
MCR-2-PTB-PT.
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
System adapter
System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268
Eight MINI analog signal converters with screw connection method can be connected to a control system using a system
adapter and system cabling with a minimum of wiring and very low error risk.
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/08/2019 Page 9 / 9
很抱歉,暂时无法提供与“2902832”相匹配的价格&库存,您可以联系我们找货
免费人工找货