2902851

https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Configurable temperature transducer for the connection of thermocouples. Can be configured via DIP switches or, with extended functionality, using the software. Screw connection, standard configuration. Product description The configurable temperature transducer with 3-way isolation is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal. The device can either be configured via DIP switches or, with extended functionality, via the S port using the software (FDT/DTM). The measuring transducer supports fault monitoring.           Key commercial data Packing unit 1 PCE GTIN Custom tariff number 85437090 Country of origin GERMANY Technical data Note: Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions 29.08.2013   Page 1 / 7 https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Configurable/programmable Yes Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L Temperature measuring range -250 °C ... 2500 °C (Range depending on the sensor type) Output data Configurable/programmable Yes Voltage output signal 0 V ... 10 V 10 V ... 0 V 0 V ... 5 V 1 V ... 5 V Current output signal 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA Max. output voltage approx. 12.3 V Max. output current 24.6 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output < 500 Ω (at 20 mA) Power supply Supply voltage range 9.6 V DC ... 30 V DC (The T connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Typical current consumption < 27 mA (at 24 V DC) Power consumption ≤ 700 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Stripping length 12 mm 29.08.2013   Page 2 / 7 https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Technical data Connection data Screw thread M3 General Maximum temperature coefficient ≤ 0.01 %/K Cold point error, max.