2902932

2902932

  • 厂商:

    PHOENIX(菲尼克斯)

  • 封装:

    -

  • 描述:

    TC-D37SUB-AIO16-EX-PS-UNI

  • 数据手册
  • 价格&库存
2902932 数据手册
https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection Your advantages  Mechanically decoupled, passive PCB  Robust aluminum profile with integrated DIN rail  Side parts with integrated end clamps  D-SUB pin strip system connection, 37-pos. (1:1 connection)  Simple or redundant supply (decoupled from diode, protected against polarity reversal) and monitoring function implemented via separate DIN rail module  Interface for connection to HART multiplexer  Cable sets for signal connection are supplied as standard and do not have to be ordered separately Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356697989 Weight per Piece (excluding packing) 1,380.000 g Custom tariff number 85366990 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area 03/27/2021   Page 1 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Technical data Dimensions Width 242 mm 242 mm Height 170 mm 170 mm Depth 160 mm 160 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Please observe module specifications) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 5 % ... 95 % (non-condensing) Degree of protection IP00 Shock 15g, according to IEC 60068-2-27 Vibration (operation) 2g, according to IEC 60068-2-6 General Nominal voltage UN < 30 V DC (Per signal/channel) Max. permissible current 23 mA (Signal/channel) Supply Designation Power module Note Power supply via 2904673 TC-MACX-MCR-PTB power supply and error signaling module. Input voltage 24 V DC Input voltage range 19.2 V DC ... 30 V DC Input current ≤2A Redundant supply yes, decoupled from diodes Polarization and surge protection Yes Output name Switching output Contact type 1 N/C contact (alarm = open) Maximum switching voltage 50 V DC (0.3 A) Fuse 2x 2.5 A on PCB, slow-blow (replaceable) Status display 1 x red LED (error) 2x green LEDs (PWR1 and PWR2) Connection data Connection name Power supply Connection method Screw connection Stripping length 7 mm 03/27/2021   Page 2 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Technical data Connection data Number of connections 1 Number of positions 6 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Connection data 2 Connection name Controller level Connection method D-SUB pin strip Number of connections 1 Number of positions 37 Connection data 3 Connection name X11 Connection method IDC/FLK pin strip Number of connections 1 Number of positions 14 Note For connecting 16 HART devices to HART multiplexers Connection data 4 Connection name X12 Connection method IDC/FLK pin strip Number of connections 1 Number of positions 14 Note For connecting a second TC-D37SUB-AIO16-EX-PS-UNI (additional 16 HART channels) Standards and Regulations Designation Air clearances and creepage distances Standards/regulations DIN EN 50178 Rated insulation voltage 50 V Rated surge voltage 0.5 kV Insulation Basic insulation Pollution degree 2 Overvoltage category II Shock 15g, according to IEC 60068-2-27 Vibration (operation) 2g, according to IEC 60068-2-6 ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 03/27/2021   Page 3 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Technical data Standards and Regulations Class I, Zone 2, Group IIC Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings CH16 - + 15 34 1 3.1 3.2 CH14 CH15 - + 1 - 3.2 3.1 + 1 3.1 3.2 CH12 CH13 + - 1 3.1 + - 1 3.2 3.1 3.2 CH11 CH10 - + - 1 1 3.2 3.1 3.2 + 3.1 CH8 CH9 + - 3.2 3.1 1 3.2 CH7 + - + - 1 1 3.1 3.2 3.1 CH6 + 1 - 3.1 3.2 CH4 CH5 + - 3.2 3.1 1 3.2 1 - 3.1 CH2 CH3 + - + 1 3.1 CH1 3.2 - 3.2 + + - 1 1 3.1 3.2 3.1 PTSM 2.3 2.1 2.2 TC-MACXMCR-PTB 2904673 T-BUS 3.1 3.3 1.3 1.1 1.2 1 1 PW2 PW1 PW2 PW1 16 35 13 32 14 33 11 30 12 31 9 28 10 29 7 26 8 27 5 24 6 25 3 22 4 23 1 20 2 21 5 (+) PW2 6 (-) X1 DSUB 37 Alarm 1 2 3 (+) 4 (-) PW1 F1 F2 X20 COMBICON Circuit diagram Articles in set Cable set - TC-C-MAX2-SC-31320000 - 2902425 Cable set for signal transmission on the Termination Carrier for modules from the MACX Analog Ex series. Connection of terminal points 3.1 and 3.2 (signal transmission) to the signal PCB.     03/27/2021   Page 4 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Articles in set Cable set - TC-C-PTB3-SC-SET1 - 2905216 Cable set for TC-MACX-MCR-PTB power and fault signaling module (Order No. 2904673), for use on the Termination Carrier for signal conditioners from the MACX Analog Ex series.     DIN rail bus connectors - ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - 2709561 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Classifications eCl@ss eCl@ss 10.0.1 27141152 eCl@ss 11.0 27141152 eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27141152 eCl@ss 9.0 27141152 ETIM ETIM 4.0 EC002780 ETIM 6.0 EC002780 03/27/2021   Page 5 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Classifications ETIM ETIM 7.0 EC002780 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121432 UNSPSC 18.0 39121432 UNSPSC 19.0 39121432 UNSPSC 20.0 39121432 UNSPSC 21.0 39121432 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 50 V Nominal current IN 1A cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 50 V  FILE E 330267  FILE E 330267 03/27/2021   Page 6 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Approvals     Nominal current IN 1A EAC  cULus Listed      RU CDE.A*30.B.01742      Accessories Necessary add-on products Power and error message module - TC-MACX-MCR-PTB - 2904673 Power and fault signaling module with screw connection, only for use on the Termination Carrier, excluding corresponding DIN rail bus connector     Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340 Ex i repeater power supply and input signal conditioner, HART. Transmits supplied or active 0/4 - 20 mA signals from the hazardous area to a load (active or passive) in the safe area. 3-way electrical isolation; SIL 2 according to IEC 61508, with screw connection     Temperature measuring transducer - MACX MCR-EX-SL-RTD-I - 2865939 Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, order configuration. Replacement item: 1052463 MACX MCR-EX-RTD-I-C.     03/27/2021   Page 7 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Accessories Temperature measuring transducer - MACX MCR-EX-SL-TC-I - 2865942 Ex i temperature transducer: converts signals from thermocouples installed in the Ex area and mV sources and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, custom-configured. Replacement item: 1052458 MACX MCR-EX-TC-I-C.     Cable set - TC-C-MAX2-SC-32220000 - 2904446 Cable set for signal transmission and power supply on the Termination Carrier for signal conditioners from the MACX Analog Ex series. Connection of terminal points 3.2 and 2.2 (signal transmission for active input cards) to the signal PCB.     Cable - CABLE-D37SUB/B/B/ 100/KONFEK/S - 2305509 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 1 m     Cable - CABLE-D37SUB/B/B/ 200/KONFEK/S - 2305512 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 2 m     Cable - CABLE-D37SUB/B/B/ 300/KONFEK/S - 2305525 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 3 m     03/27/2021   Page 8 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Accessories Cable - CABLE-D37SUB/B/B/ 400/KONFEK/S - 2900759 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 4 m     Cable - CABLE-D37SUB/B/B/ 600/KONFEK/S - 2900760 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 6 m     Cable - CABLE-D37SUB/B/B/ 800/KONFEK/S - 2900761 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 8 m     Cable - CABLE-D37SUB/B/B/1000/KONFEK/S - 2900762 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 10 m     Cable - CABLE-D37SUB/B/B/1500/KONFEK/S - 2900763 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 15 m     03/27/2021   Page 9 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Accessories Cable - CABLE-D37SUB/B/B/2000/KONFEK/S - 2900764 Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 20 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/0,5M - 2926221 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 0.5 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/1,0M - 2926234 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 1 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/1,5M - 2926247 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 1.5 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/2,0M - 2926250 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 2 m     03/27/2021   Page 10 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Accessories Cable - CABLE-D-37SUB/F/OE/0,25/S/3,0M - 2926263 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 3 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/4,0M - 2926276 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 4 m     Cable - CABLE-D-37SUB/F/OE/0,25/S/6,0M - 2926289 Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 37-position); cable length: 6 m     Additional products Label, highly flexible - EMLF (108XE)R - 0800549 Label, highly flexible, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: 108 x 48000 mm, Number of individual labels: 1     Zack Marker strip, flat - ZBF 15:UNBEDRUCKT - 0811202 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 15 mm, lettering field size: 15 x 5.2 mm, Number of individual labels: 5     03/27/2021   Page 11 / 12 https://www.phoenixcontact.com/us/products/2902932 Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932 Accessories HART multiplexer - MACX MCR-S-MUX - 2865599 HART Multiplexer for online configuration and diagnostics of HART-compatible field devices, as well as for continuous documentation of process variables and states with a PC or management system for mounting on NS 35/7.5 or NS 32     Cable - VIP-CAB-FLK14/0,14/2,0M - 2318415 Round cable set; connection 1: IDC/FLK socket strip (1x 14-position, 180 °-out put); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 2 m     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 03/27/2021   Page 12 / 12
2902932 价格&库存

很抱歉,暂时无法提供与“2902932”相匹配的价格&库存,您可以联系我们找货

免费人工找货
2902932
    •  国内价格 香港价格
    • 1+8278.166721+1065.27757

    库存:0