2902952

https://www.phoenixcontact.com/us/products/2902952 Hybrid motor starter - ELR H51-0.6-DIN-RAIL-SET - 2902952 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Complete package consisting of ELR H51-IESSC-24DC500AC-06 and EM-RD-ADAPTER for mounting on 35 mm DIN rails.   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 480.0 GRM Custom tariff number 85371099 Country of origin Germany Technical data Input data Input name Device supply Rated control supply voltage US 24 V DC Voltage range with reference to US 0.8 ... 1.25 Rated control supply current IS 40 mA Protective circuit Protection against polarity reversal Parallel polarity protection diode Surge protection Typical response time < 35 ms Typical turn-off time < 40 ms Operating voltage display Green LED Status display Yellow LED Indication Red LED Input name Control input right/left Rated actuating voltage UC 24 V DC Voltage range with reference to UC 0.8 ... 1.25 Rated actuating current IC 5 mA 10/23/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2902952 Hybrid motor starter - ELR H51-0.6-DIN-RAIL-SET - 2902952 Technical data Output data, signaling contact Measuring via Current transformer for line current on L1 and L3 Connection data Connection method Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 General Test voltage input/output 4 kVrms Mounting position Vertical (horizontal DIN rail) Assembly instructions Can be aligned with spacing = 20 mm Operating mode 100% operating factor Designation Air and creepage distances between the power circuits Standards/regulations DIN EN 50178 Insulation safe isolation Pollution degree 2 Surge voltage category III Designation Standards/regulations Standards/regulations EN 60947 Safety integrity level according to IEC 61508-1 SIL 3 (safe shutdown) SIL 2 (motor protection) Category as per ISO 13849-1 3 Performance Level as per ISO 13849-1 e Category in acc. with EN 954-1 3 Ambient conditions Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Degree of protection IP20 10/23/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2902952 Hybrid motor starter - ELR H51-0.6-DIN-RAIL-SET - 2902952 Articles in set Hybrid motor starter - ELR H51-IESSC-24DC500AC-06 - 2902746 Short-circuit-proof "4 in 1" hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 0.6 A output current, emergency stop function, and adjustable overload shutdown. Can only be used with EM-RD or EM-RI adapter.     Adapter - EM RD-ADAPTER - 2902747 Adapter for mounting short circuit-proof hybrid motor starters of type ELR-H51 ... on 35 mm DIN rails.     Classifications eCl@ss eCl@ss 4.0 27142001 eCl@ss 4.1 27142001 eCl@ss 5.0 27142001 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 ETIM ETIM 3.0 EC000035 ETIM 4.0 EC001437 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211915 UNSPSC 7.0901 39121514 UNSPSC 11 39121514 UNSPSC 12.01 39121514 UNSPSC 13.2 39121514 10/23/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2902952 Hybrid motor starter - ELR H51-0.6-DIN-RAIL-SET - 2902952 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  cULus Listed  Drawings 10/23/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2902952 Hybrid motor starter - ELR H51-0.6-DIN-RAIL-SET - 2902952 Catalog photo Figure may contain other products. Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/23/2014   Page 5 / 5