2902956

https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in miniature relay with power contact, 1 PDT, input voltage: 120 V AC/110 V DC, UL/cUL: approved for use in Ex Zone Class I, Div. 2 and ATEX (Zone 2) Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 10.000 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (UL) -40 °C ... 60 °C (ATEX) Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 120 V AC 110 V DC Typical input current at UN 3.5 mA (UN = 120 V AC) 09/06/2016   Page 1 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Technical data Coil side 3 mA (UN = 110 V DC) Typical response time 6 ms Typical release time 15 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 0.4 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgSnO Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 5 V (at 100 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 10 A (4 s) Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT III (Relay) Mechanical service life 2 x 10 cycles Flammability rating according to UL 94 V0 Designation Standards/regulations 7 09/06/2016   Page 2 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Technical data General Standards/regulations IEC 60664 EN 50178 IEC 62103 EN 60079-0 EN 60079-15 Degree of pollution 2 2 (EN 60664-1) Overvoltage category III ATEX DEMKO 11 ATEX 1111531U  II 3 G Ex nA nC IIC Gc UL, USA Class I, Zone 2, AEx nA nC IIC T6 UL, USA/Canada Class I, Div. 2, Groups A, B, C, D UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X Mounting position any Assembly instructions In rows with zero spacing Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Standards and Regulations Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 IEC 62103 09/06/2016   Page 3 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Technical data Standards and Regulations EN 60079-0 EN 60079-15 Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V0 Conformance CE-compliant ATEX DEMKO 11 ATEX 1111531U  II 3 G Ex nA nC IIC Gc UL, USA Class I, Zone 2, AEx nA nC IIC T6 UL, USA/Canada Class I, Div. 2, Groups A, B, C, D UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X Drawings Circuit diagram A2 11 A1 14 12 Classifications eCl@ss eCl@ss 4.0 27371104 eCl@ss 4.1 27371104 eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 09/06/2016   Page 4 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Classifications ETIM ETIM 4.0 EC001437 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Accessories Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, Length: 500 mm, Color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, Length: 500 mm, Color: blue     Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, Length: 500 mm, Color: gray     09/06/2016   Page 5 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Accessories Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue     Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray     Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray     DIN rail DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     09/06/2016   Page 6 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     09/06/2016   Page 7 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     Labeled terminal marker Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     09/06/2016   Page 8 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Accessories Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Spare parts 09/06/2016   Page 9 / 10 https://www.phoenixcontact.com/us/products/2902956 Relay Module - PLC-RSC-120UC/21 ATEX - 2902956 Accessories Single relay - REL-MR- 60DC/21 - 2961118 Plug-in miniature power relay, with power contact, 1 PDT, input voltage 60 V DC     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/06/2016   Page 10 / 10