2902972

https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Input solid-state relay, with DC voltage output push-pull, transmission frequency: 100 kHz, with light indicator and protective circuit in input and output circuits, input: 24 V DC, output: 4 - 18 V DC/50 mA Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356702805 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 86 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 75 °C Degree of protection IP20 Input data Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.8 ... 1.2 Input voltage range 19.2 V DC ... 28.8 V DC Switching threshold "0" signal in reference to UN < 0.4 Switching threshold "1" signal in reference to UN > 0.8 03/12/2021   Page 1 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Technical data Input data Typical input current at UN 8 mA Typical response time 1 µs Typical turn-off time 2 µs Operating voltage display Yellow LED Type of protection Reverse polarity protection Surge protection Surge voltage protection > 33 V Transmission frequency 100 kHz Power dissipation for nominal condition 0.19 W Output data Designation Output data Output voltage range 4 V DC ... 18 V DC Limiting continuous current 50 mA Quiescent current 8.5 mA Surge voltage protection > 35 V Voltage drop at max. limiting continuous current < 1.2 V Output circuit 3-conductor push-pull, ground referenced Type of protection Reverse polarity protection Surge protection General Test voltage 2.5 kVrms (50 Hz, 1 min., input/output) Mounting position any Assembly instructions In rows with zero spacing Operating mode 100% operating factor Connection data Connection name Input side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Output side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 03/12/2021   Page 2 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Technical data Standards and Regulations Designation Air clearances and creepage distances between the power circuits Standards/regulations DIN EN 50178 Rated insulation voltage 50 V DC Rated surge voltage 0.5 kV Insulation Basic insulation Pollution degree 2 Overvoltage category II Conformance/approvals Designation Corrosive gas test Identification ISA-S71.04. G3 Harsh Group EN 60068-2-60 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram A A1 + 0 A2 – + A2 – + Classifications eCl@ss eCl@ss 10.0.1 27371604 eCl@ss 11.0 27371604 eCl@ss 4.0 27371000 eCl@ss 4.1 27371000 eCl@ss 5.0 27371000 eCl@ss 5.1 27371000 eCl@ss 6.0 27371600 eCl@ss 7.0 27371604 eCl@ss 9.0 27371604 03/12/2021   Page 3 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Classifications ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 ETIM 6.0 EC001504 ETIM 7.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39122326 UNSPSC 18.0 39122326 UNSPSC 19.0 39122326 UNSPSC 20.0 39122326 UNSPSC 21.0 39122326 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      TR_TS_D_00573_c Accessories Accessories Bridge 03/12/2021   Page 4 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue     Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue     03/12/2021   Page 5 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     03/12/2021   Page 6 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     03/12/2021   Page 7 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     03/12/2021   Page 8 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     03/12/2021   Page 9 / 10 https://www.phoenixcontact.com/pi/products/2902972 Solid-state relay module - PLC-OPT- 24DC/ 5DC/100KHZ-G - 2902972 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 03/12/2021   Page 10 / 10