2902997

https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/100 W Product Description UNO POWER power supplies with basic functionality Thanks to their high power density, compact UNO POWER power supplies are the ideal solution for loads up to 240 W, particularly in compact control boxes. The power supply units are available in various performance classes and overall widths. Their high degree of efficiency and low idling losses ensure a high level of energy efficiency. Your advantages  Flexible mounting by simply snapping onto the DIN rail  More space in the control cabinet with up to 20 % higher power density  Maximum energy efficiency, thanks to over 90 % efficiency and extremely low idling losses under 0.3 W  Outdoor installation, thanks to the wide temperature range from -25°C to +70°C Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356808354 Weight per Piece (excluding packing) 400.000 g Custom tariff number 85044030 Country of origin Vietnam Technical data Dimensions Width 55 mm Height 90 mm 09/04/2020   Page 1 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Technical data Dimensions Depth 84 mm Installation distance right/left 0 mm / 0 mm Installation distance top/bottom 30 mm / 30 mm Ambient conditions Degree of protection IP20 Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Ambient temperature (operation) -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K) Ambient temperature (start-up type tested) -25 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC AC frequency range 50 Hz ... 60 Hz -10 % ... +10 % Frequency range (fN) 50 Hz ... 60 Hz 10 % Current consumption 2.19 A (100 V AC) 1.13 A (240 V AC) Nominal power consumption 210.8 VA Inrush current < 30 A (typical) Mains buffering time > 20 ms (120 V AC) > 85 ms (230 V AC) Input fuse 4 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Power factor (cos phi) 0.53 Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 12 V DC ±1 % Nominal output current (IN) 8.3 A (-25 °C ... 55 °C) Derating 55 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance < 25 V DC Protection against overvoltage at the output (OVP) ≤ 25 V DC 09/04/2020   Page 2 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Technical data Output data Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Residual ripple < 75 mVPP (with nominal values) Output power 100 W Typical response time 500000 h (40 °C) Insulation voltage input/output 4 kV AC (type test) 3 kV AC (routine test) Degree of protection IP20 Protection class II (in closed control cabinet) Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Housing material Polycarbonate Foot latch material POM (Polyoxymethylen) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: 0 mm horizontally, 30 mm vertically Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 8 mm Screw thread M3 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² 09/04/2020   Page 3 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Technical data Connection data, output Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 8 mm Screw thread M3 Standards EMC requirements for noise immunity EN 61000-6-1 EN 61000-6-2 EMC requirements for noise emission EN 61000-6-3 EN 61000-6-4 Standard - Safety of transformers EN 61558-2-16 Standard - Electrical safety IEC 62368-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage IEC 62368-1 (SELV) und EN 60204-1 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Limitation of mains harmonic currents EN 61000-3-2 Mains variation/undervoltage EN 61000-4-11 Conformance/approvals UL approvals UL/C-UL listed UL 508 UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) UL/C-UL Recognized UL 60950-1 CSA CAN/CSA-C22.2 No. 60950-1-07 CSA-C22.2 No. 107.1-01 CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Electrostatic discharge EN 61000-4-2 Contact discharge 6 kV (Test Level 3) Discharge in air 8 kV (Test Level 3) Electromagnetic HF field EN 61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 10 V/m 09/04/2020   Page 4 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Technical data EMC data Frequency range 1 GHz ... 2 GHz Test field strength 10 V/m Frequency range 2 GHz ... 3 GHz Test field strength 10 V/m Comments Criterion A Fast transients (burst) EN 61000-4-4 Input 4 kV (Test Level 4 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Comments Criterion B Surge voltage load (surge) EN 61000-4-5 Input 2 kV (Test Level 3 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 1 - asymmetrical) Comments Criterion B Conducted interference EN 61000-4-6 Frequency range 10 kHz ... 80 MHz Voltage 10 V (Test Level 3) Comments Criterion A Voltage dips EN 61000-4-11 Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/04/2020   Page 5 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Block diagram Classifications eCl@ss eCl@ss 10.0.1 27040701 eCl@ss 4.0 27040700 eCl@ss 4.1 27040700 eCl@ss 5.0 27049000 eCl@ss 5.1 27049000 eCl@ss 6.0 27049000 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002540 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 UNSPSC 18.0 39121004 UNSPSC 19.0 39121004 UNSPSC 20.0 39121004 UNSPSC 21.0 39121004 09/04/2020   Page 6 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 214596 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 214596 IECEE CB Scheme    http://www.iecee.org/  DK-39228-A1-UL cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 EAC      EAC-Zulassung cULus Recognized       09/04/2020   Page 7 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Approvals cULus Listed       Accessories Accessories Device circuit breakers Electronic device circuit breaker - CBMC E4 24DC/1-4A NO - 2906031 Multi-channel electronic device circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.     Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032 Multi-channel electronic device circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.     Device protection Type 3 surge protection device - PLT-SEC-T3-230-FM-UT - 2907919 Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.     Type 3 surge protection device - PLT-SEC-T3-24-FM-UT - 2907916 Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage 24 V AC/DC.     09/04/2020   Page 8 / 9 https://www.phoenixcontact.com/us/products/2902997 Power supply unit - UNO-PS/1AC/12DC/100W - 2902997 Accessories Redundancy module Redundancy module - UNO-DIODE/5-24DC/2X10/1X20 - 2905489 Redundancy module, 5 V - 24 V DC, 2 x 10 A, 1 x 20 A.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 09/04/2020   Page 9 / 9