2903149

https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A Product Description TRIO POWER power supplies with standard functionality The TRIO POWER power supply range with push-in connection has been perfected for use in machine building. All functions and the space-saving design of the single and three-phase modules are optimally tailored to the stringent requirements. Under challenging ambient conditions, the power supply units, which feature an extremely robust electrical and mechanical design, ensure the reliable supply of all loads. Your advantages  Save time and costs, thanks to the Push-in connection and narrow design  Increase system availability, thanks to dynamic boost with 150% of the nominal current for five seconds  Maximum flexibility due to the wide temperature range from -25°C to +70°C and device startup at -40°C  Rugged design Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356960854 Weight per Piece (excluding packing) 1,200.000 g Custom tariff number 85044030 Country of origin China Technical data Dimensions Width 42 mm Height 130 mm 11/07/2019   Page 1 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Technical data Dimensions Depth 160 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) Ambient temperature (start-up type tested) -40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Installation height ≤ 5000 m (> 2000 m, Derating: 10 %/1000 m) Input data Nominal input voltage range 100 V AC ... 240 V AC 110 V DC ... 250 V DC Input voltage range 100 V AC ... 240 V AC -15 % ... +10 % 110 V DC ... 250 V DC -10 % ... +10 % Dielectric strength maximum 300 V AC 15 s AC frequency range 50 Hz ... 60 Hz ±10 % Discharge current to PE < 3.5 mA Current consumption 3.1 A (100 V AC) 2.4 A (120 V AC) 1.3 A (230 V AC) 1.4 A (240 V AC) Nominal power consumption 285 VA Inrush current ≤ 25 A (typical) Mains buffering time typ. 15 ms (120 V AC) typ. 20 ms (230 V AC) Input fuse 6.3 A (internal (device protection)) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Power factor (cos phi) 0.93 Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 24 V DC ±1 % Setting range of the output voltage (USet) 24 V DC ... 28 V DC (constant capacity) Nominal output current (IN) 10 A Dynamic Boost (IDyn.Boost) 15 A (5 s) 11/07/2019   Page 2 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Technical data Output data Derating > 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance ≤ 35 V DC Protection against overvoltage at the output (OVP) ≤ 30 V DC Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Residual ripple < 10 mVPP (with nominal values) Output power 240 W Typical response time 91 % (for 230 V AC and nominal values) Insulation voltage input/output 3 kV AC (type test) 1.5 kV AC (routine test) Protection class I (in closed control cabinet) Degree of protection IP20 MTBF (IEC 61709, SN 29500) > 1800000 h (25 °C) > 1000000 h (40 °C) > 480000 h (60 °C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm Connection data, input Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 10 mm Connection data, output Connection method Push-in connection 11/07/2019   Page 3 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Technical data Connection data, output Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 8 mm Connection data for signaling Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm Standards EMC requirements for noise immunity EN 61000-6-1 EN 61000-6-2 EMC requirements for noise emission EN 61000-6-3 EN 61000-6-4 Standard - Safety of transformers EN 61558-2-16 (air clearances and creepage distances only) Standard - Electrical safety IEC 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Limitation of mains harmonic currents EN 61000-3-2 Rail applications EN 50121-4 Conformance/approvals UL approvals UL Listed UL 508 UL/C-UL Recognized UL 60950-1 EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with LV directive 2006/95/EC Electrostatic discharge EN 61000-4-2 11/07/2019   Page 4 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Technical data EMC data Contact discharge 6 kV (Test Level 4) Discharge in air 8 kV (Test Level 4) Electromagnetic HF field EN 61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 10 V/m (Test Level 3) Frequency range 1 GHz ... 2 GHz Test field strength 10 V/m (Test Level 3) Frequency range 2 GHz ... 3 GHz Test field strength 10 V/m (Test Level 3) Comments Criterion A Fast transients (burst) EN 61000-4-4 Input 4 kV (Test Level 4 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Signal 1 kV (Test Level 2 - asymmetrical) Comments Criterion A Surge voltage load (surge) EN 61000-4-5 Input 3 kV (Test Level 3 - symmetrical) 6 kV (Test Level 4 - asymmetrical) Output 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 1 - asymmetrical) Signal 1 kV (Test Level 2 - asymmetrical) Comments Criterion B Conducted interference EN 61000-4-6 Frequency range 0.15 MHz ... 80 MHz Voltage 10 V (Test Level 3) Comments Criterion A Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 11/07/2019   Page 5 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Block diagram Classifications eCl@ss eCl@ss 4.0 27040700 eCl@ss 4.1 27040700 eCl@ss 5.0 27049000 eCl@ss 5.1 27049000 eCl@ss 6.0 27049000 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 4.0 EC002540 ETIM 5.0 EC002540 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 13.2 39121004 Approvals Approvals 11/07/2019   Page 6 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Approvals Approvals UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / DNV GL / UL Recognized / IECEE CB Scheme / UL Listed / cUL Listed / cUL Recognized / DNV GL / EAC Ex Approvals UL Listed / cUL Listed / UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 IECEE CB Scheme    http://www.iecee.org/  DK-45300-A1-UL cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 EAC      RU CDE.A*30.B.01082 DNV GL    https://approvalfinder.dnvgl.com/  TAA00000BM 11/07/2019   Page 7 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 IECEE CB Scheme    http://www.iecee.org/  DK-45300-A1-UL UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 DNV GL    https://approvalfinder.dnvgl.com/  TAA00000BM EAC      RU CDE.A*30.B.01082 Accessories Accessories Device circuit breakers Electronic device circuit breaker - CBM E4 24DC/0.5-10A NO-R - 2905743 Multi-channel, electronic device circuit breaker with active current limitation for protecting four loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.     11/07/2019   Page 8 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Accessories Electronic device circuit breaker - CBM E8 24DC/0.5-10A NO-R - 2905744 Multi-channel, electronic device circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.     Electronic device circuit breaker - CBMC E4 24DC/1-4A NO - 2906031 Multi-channel electronic device circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.     Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032 Multi-channel electronic device circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.     Device protection Type 3 surge protection device - PLT-SEC-T3-230-FM-PT - 2907928 Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.     Type 3 surge protection device - PLT-SEC-T3-24-FM-PT - 2907925 Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage 24 V AC/DC.     11/07/2019   Page 9 / 10 https://www.phoenixcontact.com/us/products/2903149 Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149 Accessories Potential distributor Potential distributors - VIP-2/SC/PDM-2/24 - 2315269 VARIOFACE module, with two equipotential busbars (P1, P2) for potential distribution, for mounting on NS 35 rails. Module width: 70.4 mm     Potential distributors - VIP-3/PT/PDM-2/24 - 2903798 VARIOFACE module with push-in connection and two equipotential busbars (P1, P2) for potential distribution, for mounting on NS 35 rails. Module width: 57.1 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/07/2019   Page 10 / 10