https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and
retaining bracket. Contact type: 3 N/O contacts. Input voltage: 24 V DC
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356732987
Weight per Piece (excluding packing)
212.000 g
Custom tariff number
85364110
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
43 mm
Height
111 mm
Depth
90 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (Relay base)
08/05/2019 Page 1 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Technical data
Ambient conditions
RT I (Relay)
Coil side
Nominal input voltage UN
24 V DC
Input voltage range in reference to UN
see diagram
Typical input current at UN
70 mA
Typical response time
20 ms
Typical release time
20 ms
Coil voltage
24 V DC
Protective circuit
Damping diode
Operating voltage display
Yellow LED
Power dissipation for nominal condition
1.68 W
Contact side
Contact type
3 N/O contacts
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
440 V AC
250 V DC
Minimum switching voltage
10 V (At 24 mA)
Min. switching current
10 mA (at 24 V)
Maximum inrush current
50 A (20 ms, N/O contact)
Limiting continuous current
10 A (see diagram)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
480 W (at 48 V DC)
600 W (at 60 V DC)
660 W (at 110 V DC)
183 W (at 220 V DC)
2500 VA (for 250 V AC)
4000 VA (at 440 V AC)
Switching capacity
1 A (at 24 V, DC13)
1 A (at 120 V, DC13)
1 A (at 220 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
Motor load according to UL 508
1/3 HP, 120 V AC (single-phase AC motor)
1/2 HP, 240 V AC (single-phase AC motor)
08/05/2019 Page 2 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Technical data
Contact side
1/2 HP, 240 V AC (three-phase induction motor)
General
Test voltage relay winding/relay contact
2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact
2.5 kVrms (50 Hz, 1 min.)
Operating mode
100% operating factor
Mechanical service life
approx. 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Connection data
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double
terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
Connection data 2
Connection name
Contact side
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double
terminal block)
Conductor cross section AWG
26 ... 14 (solid)
26 ... 14 (flexible)
Standards and Regulations
Connection in acc. with standard
CSA
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V AC
Rated surge voltage
4 kV
Insulation
Basic insulation
08/05/2019 Page 3 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Technical data
Standards and Regulations
Pollution degree
2
Overvoltage category
III
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Articles in set
Relay base - RIF-4-BPT/3X21 - 2900961
RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, Push-in connection, plug-in option for input/
suppressor modules, for mounting on NS 35/7,5
Single relay - REL-PR3- 24DC/3X1 - 2903706
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 24 V DC
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+,
A2-, input voltage: 12 ... 24 V DC ±20 %
08/05/2019 Page 4 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Articles in set
Retaining bracket - RIF-RH-4 - 2900956
Relay retaining bracket, with holder for marking material, suitable for RIF-4 relay base, for high-power relay
Classifications
eCl@ss
eCl@ss 5.0
27371601
eCl@ss 5.1
27371600
eCl@ss 6.0
27371600
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
Approvals
Approvals
Approvals
DNV GL / CSA / PRS / LR / EAC
08/05/2019 Page 5 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Approvals
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAA000018V
CSA
http://www.csagroup.org/services-industries/product-listing/
2607057
PRS
http://www.prs.pl/
TE/2108/880590/16
LR
http://www.lr.org/en
15/20011
EAC
TR_TS_D_00573_c
Accessories
Accessories
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Insulating sleeve
08/05/2019 Page 6 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
08/05/2019 Page 7 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 2-6 GY - 3032237
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
08/05/2019 Page 8 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500,
mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
08/05/2019 Page 9 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm
Zack marker strip - ZB 15 CUS - 0824945
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Zack marker strip - ZB 15,LGS:L1-N,PE - 0811998
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Zack marker strip - ZB 16 CUS - 0827463
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 16 mm, lettering field size: 10.5 x 16 mm
08/05/2019 Page 10 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm
Marker for terminal blocks - UC-TM 16 CUS - 0824621
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 CUS - 0829637
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 14.8 x 9.6 mm
Zack Marker strip, flat - ZBF 16 CUS - 0827465
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 16 mm, lettering field size: 5.15 x 16 mm
Marker for terminal blocks - UC-TMF 16 CUS - 0824678
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm
08/05/2019 Page 11 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Marker for terminal blocks - UCT-TMF 16 CUS - 0829693
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.2 x 4.7 mm
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can
be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm
08/05/2019 Page 12 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Zack marker strip - ZB 16:UNPRINTED - 0827461
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 16 mm, lettering field size: 16 x 10.5 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 - 0829146
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size:
14.8 x 9.6 mm
Zack Marker strip, flat - ZBF 16:UNPRINTED - 0827464
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 16.25 x 10.5 mm
08/05/2019 Page 13 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 5.1 mm
Marker for terminal blocks - UCT-TMF 16 - 0829218
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size:
15.2 x 4.7 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Spare parts
Relay base - RIF-4-BPT/3X21 - 2900961
RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, Push-in connection, plug-in option for input/
suppressor modules, for mounting on NS 35/7,5
Single relay - REL-PR3- 24DC/3X1 - 2903706
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 24 V DC
08/05/2019 Page 14 / 15
https://www.phoenixcontact.com/us/products/2903275
Relay Module - RIF-4-RPT-LDP-24DC/3X1 - 2903275
Accessories
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+,
A2-, input voltage: 12 ... 24 V DC ±20 %
Retaining bracket - RIF-RH-4 - 2900956
Relay retaining bracket, with holder for marking material, suitable for RIF-4 relay base, for high-power relay
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/05/2019 Page 15 / 15
