2903277

https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 3 PDTs. Input voltage: 120 V AC Key Commercial Data Packing unit 1 STK Minimum order quantity 5 STK GTIN GTIN 4046356731669 Weight per Piece (excluding packing) 208.000 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 43 mm Height 111 mm Depth 90 mm Ambient conditions Ambient temperature (operation) -40 °C ... 40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 03/27/2018   Page 1 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Technical data Coil side Nominal input voltage UN 120 V AC Input voltage range in reference to UN see diagram Mains frequency 50/60 Hz Typical input current at UN 24 mA Typical response time 5 ms ... 25 ms Typical release time range 5 ms ... 20 ms Coil voltage 120 V AC Protective circuit Varistor Operating voltage display Yellow LED Power dissipation for nominal condition 2.88 W Contact side Contact type 3 PDTs Type of switch contact Single contact Contact material AgNi Maximum switching voltage 440 V AC 250 V DC Minimum switching voltage 10 V (At 24 mA) Min. switching current 10 mA (at 24 V) Maximum inrush current 50 A (20 ms, N/O contact) Limiting continuous current 8 A (see diagram) Interrupting rating (ohmic load) max. 216 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 70 W (at 220 V DC) 2250 VA (for 250 V AC) 4000 VA (at 440 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.22 A (at 120 V, DC13) 0.11 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 1.5 A (at 240 V, AC15) 3-phase motor load 1500 W Motor load according to UL 508 1/3 HP, 120 V AC (single-phase AC motor) 1/2 HP, 240 V AC (single-phase AC motor) 03/27/2018   Page 2 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Technical data Contact side 1/2 HP, 240 V AC (three-phase induction motor) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 16 (solid) 26 ... 16 (stranded) Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.14 mm² ... 2.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 14 (solid) 26 ... 14 (stranded) General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Test voltage relay contact/relay contact 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT I (Relay) Mechanical service life Approx. 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Connection in acc. with standard CSA Standards/regulations DIN EN 50178 Rated insulation voltage 250 V AC 03/27/2018   Page 3 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Technical data Standards and Regulations Rated surge voltage 4 kV Insulation Basic insulation Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Diagram 32 22 12 Coil voltage U/UN 34 24 14 31 21 11 A2 A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 50 60 70 Ambient temperature [°C] DC coil (observe contact derating) AC coil (observe contact derating) 80 Operating voltage range 03/27/2018   Page 4 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Diagram 20 11 10 10 9 5 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 300 Switching voltage [V] 500 AC, ohmic load DC, ohmic load Interrupting rating Limiting continuous current per contact [A] Switching current [A] Diagram 8 7 6 5 4 3 2 1 20 30 40 Contact derating Diagram 7 1 10 10 6 0,9 Reduction factor Cycles 80 DC coil AC coil Diagram 10 50 60 70 Ambient temperature [°C] 5 10 4 0 1 2 3 Switching capacity [kVA] 4 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j ! 250 V AC, ohmic load Electrical service life Service life reduction factor Articles in set Relay base - RIF-4-BPT/3X21 - 2900961 RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, Push-in connection, plug-in option for input/ suppressor modules, for mounting on NS 35/7,5     03/27/2018   Page 5 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Articles in set Single relay - REL-PR3-120AC/3X21 - 2903704 Plug-in high-power relay with power contacts, 3 PDTs, coil voltage: 120 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-4 - 2900956 Relay retaining bracket, with holder for marking material, suitable for RIF-4 relay base, for high-power relay     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 03/27/2018   Page 6 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Classifications UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 Approvals Approvals Approvals CSA / EAC / LR / PRS / DNV GL Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/  2607057 EAC      RU CDE.A*30.B.01082 LR    http://www.lr.org/en  15/20011 PRS    http://www.prs.pl/  TE/2108/880590/16  http://exchange.dnv.com/tari/  TAA000018V DNV GL  03/27/2018   Page 7 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     03/27/2018   Page 8 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     03/27/2018   Page 9 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Accessories Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     03/27/2018   Page 10 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Accessories Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Spare parts Relay base - RIF-4-BPT/3X21 - 2900961 RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, Push-in connection, plug-in option for input/ suppressor modules, for mounting on NS 35/7,5     03/27/2018   Page 11 / 12 https://www.phoenixcontact.com/us/products/2903277 Relay Module - RIF-4-RPT-LV-120AC/3X21 - 2903277 Accessories Single relay - REL-PR3-120AC/3X21 - 2903704 Plug-in high-power relay with power contacts, 3 PDTs, coil voltage: 120 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-4 - 2900956 Relay retaining bracket, with holder for marking material, suitable for RIF-4 relay base, for high-power relay     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/27/2018   Page 12 / 12