2903280

https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 120 V AC The figure shows the 24 V DC version Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 208.0 GRM Custom tariff number 85364900 Country of origin Germany Technical data Dimensions Width 43 mm Height 111 mm Depth 90 mm Ambient conditions Ambient temperature (operation) -40 °C ... 40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 120 V AC Input voltage range in reference to UN (see diagram) Nominal input current at UIN 24 mA Typical response time 5 ms ... 25 ms Typical release time range 5 ms ... 20 ms Operating voltage display Yellow LED 3/7/14   Page 1 / 7 https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Technical data Coil side Protective circuit Varistor Contact side Contact type 2 PDT Contact material AgNi Maximum switching voltage 440 V AC 250 V DC Minimum switching voltage 10 V (At 24 mA) Maximum inrush current 50 A (20 ms, N/O contact) Min. switching current 10 mA (at 24 V) Limiting continuous current 9 A (see diagram) Interrupting rating (ohmic load) max. 216 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 70 W (at 220 V DC) 2250 VA (for 250 V AC) 4000 VA (At 440 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (24 V (DC13)) 1.5 A (230 V (AC15)) 3.6 A (230 V (AC3)) Single-phase motor load 800 W Motor load according to UL 508 1/3 HP, 120 V AC (single-phase AC motor) 1/2 HP, 240 V AC (single-phase AC motor) Connection data Connection method Push-in connection Connection name Input Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section AWG/kcmil min. 26 3/7/14   Page 2 / 7 https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Technical data Connection data Conductor cross section AWG/kcmil max 16 Stripping length 8 mm Connection name Output Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 Stripping length 10 mm General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Test voltage relay contact/relay contact 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT I (Relay) Mechanical service life Approx. 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Rated insulation voltage 250 V AC Pollution degree 2 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing 3/7/14   Page 3 / 7 https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Articles in set Relay socket - RIF-4-BPT/3X21 - 2900961 RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, push-in connection, plug-in option for input/ suppressor modules, for mounting on NS 35/7,5     Single relay - REL-PR2-120AC/2X21 - 2903700 Plug-in high-power relay with power contacts, 2 PDTs, coil voltage: 120 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 - 230 V AC/110 V DC ±20%     Retaining bracket - RIF-RH-4 - 2900956 Relay retaining bracket, with holder for marking material, suitable for RIF-4 relay base, for high-power relay     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 3/7/14   Page 4 / 7 https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Classifications eCl@ss eCl@ss 8.0 27371601 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Approvals Approvals Approvals CSA Ex Approvals Approvals submitted Approval details CSA  Drawings 3/7/14   Page 5 / 7 https://www.phoenixcontact.com/us/products/2903280 Relay Module - RIF-4-RPT-LV-120AC/2X21 - 2903280 Circuit diagram Diagram 22 12 Coil voltage U/UN 24 14 21 11 A2 A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 50 60 70 Ambient temperature [°C] DC coil (observe contact derating) AC coil (observe contact derating) 80 Operating voltage range Diagram 20 11 10 10 9 5 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 300 Switching voltage [V] 500 AC, ohmic load DC, ohmic load 8 7 6 5 4 3 2 1 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coil AC coil Interrupting rating Contact derating Diagram Diagram 7 1 10 10 6 0,9 Reduction factor Cycles 10 Limiting continuous current per contact [A] Switching current [A] Diagram 5 10 4 0 1 2 3 Switching capacity [kVA] 4 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j ! 250 V AC, ohmic load Electrical service life Service life reduction factor 3/7/14   Page 6 / 7 https://www.phoenixcontact.com/us/products/2903280 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 3/7/14   Page 7 / 7