https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay modules with Push-in connection, consisting of: relay base, power contact relay, and
retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DC
Product Description
The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in
accordance with UL 508.
The relevant approvals can be called up at the individual components in question.
Key Commercial Data
Packing unit
5 pc
GTIN
GTIN
4046356732017
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
40 mm
Height
103 mm
Depth
90 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (Relay base)
RT I (Relay)
Coil side
Nominal input voltage UN
24 V DC
03/12/2021 Page 1 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Technical data
Coil side
Input voltage range in reference to UN
see diagram
Typical input current at UN
60 mA
Typical response time
18 ms
Typical release time
20 ms
Coil voltage
24 V DC
Protective circuit
Damping diode
Operating voltage display
Yellow LED
Power dissipation for nominal condition
1.44 W
Contact side
Contact type
2 changeover contacts
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
10 V (At 24 mA)
Min. switching current
10 mA (at 24 V)
Maximum inrush current
30 A (20 ms, N/O contacts)
Limiting continuous current
10 A (see diagram)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
2500 VA (for 250 V AC)
Switching capacity
2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
General
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
2 kVrms (50 Hz, 1 min., contact/contact)
Operating mode
100% operating factor
Flammability rating according to UL 94
V2 (Housing)
Mechanical service life
approx. 2x 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Connection data
Connection name
Coil side
03/12/2021 Page 2 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Technical data
Connection data
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
Connection data 2
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
Standards and Regulations
Connection in acc. with standard
CSA
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V AC
Rated surge voltage
4 kV
Insulation
Basic insulation
Pollution degree
2
Overvoltage category
III
Conformance/approvals
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
03/12/2021 Page 3 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Circuit diagram
Diagram
22 12
Coil voltage U/UN
24 14
21 11
A1+
A2-
DC coils
1,8
1,7
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
20
30
80
40
50
60
70
Ambient temperature [°C]
DC coil (observe contact derating)
AC coil (observe contact derating)
Operating voltage range
Diagram
Diagram
11
10
10
6
4
9
2
1
0,5
0,3
0,2
0,1
10
20
30
50 70 100
200
Switching voltage [V]
300
AC, ohmic load
DC, ohmic load
Interrupting rating
Limiting continuous current per contact [A]
Switching current [A]
20
8
7
6
5
4
3
2
1
20
30
40
Contact derating
Diagram
7
1
10
10
6
0,9
5
10
4
0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6
Switching capacity [kVA]
Reduction factor
Cycles
80
DC coil
AC coil
Diagram
10
50
60
70
Ambient temperature [°C]
0,8
0,7
0,6
0,5
0,4
0,3
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
COS j
! 250 V AC, ohmic load
Electrical service life
Service life reduction factor
03/12/2021 Page 4 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Articles in set
Relay base - RIF-3-BPT/2X21 - 2900937
Relay base RIF-3..., for octal relays with 2 changeover contacts, Push-in connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
Single relay - REL-OR2/LDP- 24DC/2X21 - 2903689
Plug-in octal relays with power contacts, 2 changeover contacts, test button, freewheeling diode, mechanical
switching position indicator, polarity: A1+, A2-, coil voltage: 24 V DC
Retaining bracket - RIF-RH-3 - 2900955
Relay retaining bracket, with holder for marking material, suitable for RIF-3 relay base, for octal relay
Classifications
eCl@ss
eCl@ss 10.0.1
27371601
eCl@ss 11.0
27371601
eCl@ss 4.0
27371100
eCl@ss 4.1
27371100
eCl@ss 5.0
27371600
eCl@ss 5.1
27371600
eCl@ss 6.0
27371600
eCl@ss 7.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
ETIM 7.0
EC001437
03/12/2021 Page 5 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Classifications
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
UNSPSC 20.0
39122334
UNSPSC 21.0
39122334
Approvals
Approvals
Approvals
CSA / PRS / LR / EAC
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
2607057
PRS
http://www.prs.pl/
TE/2108/880590/16
LR
http://www.lr.org/en
15/20011
EAC
TR_TS_D_00573_c
Accessories
Accessories
03/12/2021 Page 6 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
03/12/2021 Page 7 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
03/12/2021 Page 8 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
03/12/2021 Page 9 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
03/12/2021 Page 10 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
03/12/2021 Page 11 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
03/12/2021 Page 12 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 2-6 GY - 3032237
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual
labels: 10
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5
mm, Number of individual labels: 10
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
03/12/2021 Page 13 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical
numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering
field size: 5.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415
Zack marker strip, Strip, white, labeled, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of
individual labels: 96
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of
individual labels: 72
Zack marker strip - ZB 15 CUS - 0824945
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual
labels: 5
03/12/2021 Page 14 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Zack marker strip - ZB 15,LGS:L1-N,PE - 0811998
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm, Number of individual labels: 32
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 5.1 mm, Number of individual labels: 32
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual
labels: 10
03/12/2021 Page 15 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field
size: 4.6 x 10.5 mm, Number of individual labels: 72
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of
individual labels: 5
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Spare parts
Relay base - RIF-3-BPT/2X21 - 2900937
Relay base RIF-3..., for octal relays with 2 changeover contacts, Push-in connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
03/12/2021 Page 16 / 17
https://www.phoenixcontact.com/pi/products/2903297
Relay Module - RIF-3-RPT-LDP-24DC/2X21 - 2903297
Accessories
Single relay - REL-OR2/LDP- 24DC/2X21 - 2903689
Plug-in octal relays with power contacts, 2 changeover contacts, test button, freewheeling diode, mechanical
switching position indicator, polarity: A1+, A2-, coil voltage: 24 V DC
Retaining bracket - RIF-RH-3 - 2900955
Relay retaining bracket, with holder for marking material, suitable for RIF-3 relay base, for octal relay
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
03/12/2021 Page 17 / 17
