2903311

https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 120 V AC The figure shows the 24 V DC version Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 110.0 GRM Custom tariff number 85364900 Country of origin Germany Technical data Dimensions Width 31 mm Height 96 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 120 V AC Input voltage range in reference to UN (see diagram) Nominal input current at UIN 13 mA Typical response time 5 ms ... 15 ms Typical release time range 5 ms ... 20 ms Operating voltage display Yellow LED 3/7/14   Page 1 / 6 https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Technical data Coil side Protective circuit Varistor Contact side Contact type 2 PDT Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (At 24 mA) Maximum inrush current 30 A (20 ms, N/O contact) Min. switching current 5 mA (at 24 V) Limiting continuous current 8.5 A (see diagram) Interrupting rating (ohmic load) max. 204 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 48 W (at 220 V DC) 2125 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (24 V (DC13)) 1.5 A (230 V (AC 15)) Connection data Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm² Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 16 Stripping length 8 mm General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Test voltage relay contact/relay contact 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT I (Relay) 3/7/14   Page 2 / 6 https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Technical data General Mechanical service life Approx. 2 x 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Rated insulation voltage 250 V AC Pollution degree 2 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing Articles in set Relay socket - RIF-2-BPT/4X21 - 2900934 RIF-2... relay base, for industrial relay with 2 or 4 PDTs, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Single relay - REL-IR2/L-120AC/2X21 - 2903667 Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, mechanical switch position indicator, input voltage: 120 V AC     Plug-in module - RIF-V-120-230 UC - 2900948 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor, input voltage: 120 - 230 V AC/DC ±20%     3/7/14   Page 3 / 6 https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Articles in set Retaining bracket - RIF-RH-2 - 2900954 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for industrial relay     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371603 eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 eCl@ss 7.0 27371603 eCl@ss 8.0 27371603 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Approvals Approvals Approvals CSA Ex Approvals 3/7/14   Page 4 / 6 https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Approvals Approvals submitted Approval details CSA  Drawings 42 12 44 14 41 11 A2 Diagram Coil voltage U/UN Circuit diagram A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 0 10 20 30 40 50 60 70 Ambient temperature [°C] DC coil (observe contact derating) AC coil (observe contact derating) 80 Operating voltage range Diagram Diagram 11 10 10 6 4 9 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] AC, ohmic load DC, ohmic load Interrupting rating 300 Limiting continuous current per contact [A] Switching current [A] 20 8 7 6 5 4 3 2 1 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coil AC coil Contact derating 3/7/14   Page 5 / 6 https://www.phoenixcontact.com/us/products/2903311 Relay Module - RIF-2-RPT-LV-120AC/2X21 - 2903311 Diagram 10 Diagram 7 Cycles 1 0,9 6 10 Reduction factor 10 5 0 1 2 Switching capacity [kVA] 3 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j ! 250 V AC, ohmic load Electrical service life Service life reduction factor © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 3/7/14   Page 6 / 6