2903315

https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 2 PDTs. Input voltage: 24 V DC Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 110.0 g Custom tariff number 85364110 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 31 mm Height 96 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 24 V DC Input voltage range in reference to UN see diagram Typical input current at UN 42 mA 03/15/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 Technical data Coil side Typical response time 13 ms Typical release time 14 ms Coil voltage 24 V DC Protective circuit Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 1.01 W Contact side Contact type 2 PDT Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (At 24 mA) Min. switching current 5 mA (at 24 V) Maximum inrush current 30 A (20 ms, N/O contact) Limiting continuous current 10 A (see diagram) Interrupting rating (ohmic load) max. 240 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 48 W (at 220 V DC) 2500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.22 A (at 120 V, DC13) 0.11 A (at 250 V, DC13) 3 A (at 120 V, AC15) 1.5 A (at 240 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) Conductor cross section AWG 26 ... 16 Connection data output side Connection name Contact side 03/15/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 Technical data Connection data output side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) Conductor cross section AWG 26 ... 16 General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Test voltage relay contact/relay contact 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT I (Relay) Mechanical service life Approx. 2 x 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Rated insulation voltage 250 V AC Degree of pollution 2 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Connection in acc. with standard CSA Standards/regulations DIN EN 50178 IEC 62103 Rated insulation voltage 250 V AC Insulation Basic insulation Degree of pollution 2 Overvoltage category III 03/15/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 Articles in set Relay socket - RIF-2-BPT/4X21 - 2900934 RIF-2... relay base, for industrial relay with 2 or 4 PDTs, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Single relay - REL-IR2/LDP- 24DC/2X21 - 2903660 Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position indicator, polarity: A1+, A2-, input voltage: 24 V DC     Retaining bracket - RIF-RH-2 - 2900954 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for industrial relay     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371603 eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 eCl@ss 7.0 27371603 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001437 03/15/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 Classifications UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Approvals Approvals Approvals CSA / EAC / LR / EAC Ex Approvals Approvals submitted Approval details CSA  EAC  LR  EAC  Drawings 03/15/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2903315 Relay Module - RIF-2-RPT-LDP-24DC/2X21 - 2903315 42 12 44 14 41 11 A2- A1+ Diagram Coil voltage U/UN Circuit diagram DC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 80 40 50 60 70 Ambient temperature [°C] DC coil (observe contact derating) AC coil (observe contact derating) Operating voltage range Diagram Diagram 11 10 10 6 4 9 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] 300 AC, ohmic load DC, ohmic load Interrupting rating Limiting continuous current per contact [A] Switching current [A] 20 8 7 6 5 4 3 2 1 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coil AC coil Contact derating Diagram 10 Diagram 7 Cycles 1 0,9 6 10 Reduction factor 10 5 0 1 2 Switching capacity [kVA] 3 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j ! 250 V AC, ohmic load Electrical service life Service life reduction factor 03/15/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2903315 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/15/2016   Page 7 / 7