2903316

https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 230 V AC Key Commercial Data Packing unit 10 STK GTIN GTIN 4046356732185 Weight per Piece (excluding packing) 116.400 g Custom tariff number 85364900 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 27 mm Height 89 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC Input voltage range in reference to UN see diagram Mains frequency 50/60 Hz 04/16/2018   Page 1 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Technical data Coil side Typical input current at UN 6.5 mA Typical response time 5 ms ... 15 ms Typical release time range 5 ms ... 20 ms Coil voltage 230 V AC Protective circuit Varistor Operating voltage display Yellow LED Contact side Contact type 4 PDTs Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (At 24 mA) Min. switching current 5 mA (at 24 V) Maximum inrush current 16 A (20 ms, N/O contact) Limiting continuous current 5 A (see diagram) Interrupting rating (ohmic load) max. 120 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 48 W (at 220 V DC) 1250 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.22 A (at 120 V, DC13) 0.11 A (at 250 V, DC13) 1.5 A (at 24 V, AC15) 1.5 A (at 120 V, AC15) 1 A (at 240 V, AC15) Connection data input side Connection name Input side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (stranded) Torque 0.5 Nm ... 0.6 Nm 04/16/2018   Page 2 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Technical data Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (stranded) Torque 0.5 Nm ... 0.6 Nm General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Test voltage relay contact/relay contact 2 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT I (Relay) Mechanical service life Approx. 2x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Standards/regulations DIN EN 50178 Rated insulation voltage 250 V AC Rated surge voltage 2.5 kV Insulation Basic insulation Degree of pollution 2 Overvoltage category II Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 04/16/2018   Page 3 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Circuit diagram Diagram 42 32 22 12 11 10 44 34 24 14 Limiting continuous current per contact [A] 9 41 31 21 11 A2 A1 AC coils 8 7 6 5 4 3 2 1 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coil AC coil Contact derating 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 Diagram 20 Switching current [A] Coil voltage U/UN Diagram 10 6 4 2 1 0,5 0,3 0,2 0,1 30 40 50 60 70 Ambient temperature [°C] DC coil (observe contact derating) AC coil (observe contact derating) 10 80 20 50 70 100 200 Switching voltage [V] 300 AC, ohmic load DC, ohmic load Operating voltage range Interrupting rating Diagram 10 30 Diagram 7 Cycles 1 0,9 6 10 Reduction factor 10 5 0 1 2 Switching capacity [kVA] 3 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j ! 250 V AC, ohmic load Electrical service life Service life reduction factor 04/16/2018   Page 4 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Articles in set Relay base - RIF-2-BSC/4X21 - 2900932 RIF-2... relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/ interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-IR4/L-230AC/4X21 - 2903688 Plug-in industrial relay with power contacts, 4 PDTs, test key, status LED, mechanical switch position indicator, input voltage: 230 V AC     Plug-in module - RIF-V-120-230 UC - 2900948 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor, input voltage: 120 ... 230 V AC/DC ±20 %     Retaining bracket - RIF-RH-2 - 2900954 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for industrial relay     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 04/16/2018   Page 5 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Classifications ETIM ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 Approvals Approvals Approvals DNV GL / CSA / EAC Ex Approvals Approval details DNV GL   http://exchange.dnv.com/tari/  TAA000018V CSA    http://www.csagroup.org/services-industries/product-listing/  2607057 EAC      RU CDE.A*30.B.01082 Accessories Accessories End block 04/16/2018   Page 6 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Accessories End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     04/16/2018   Page 7 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     04/16/2018   Page 8 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Accessories Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     04/16/2018   Page 9 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Accessories Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Spare parts Relay base - RIF-2-BSC/4X21 - 2900932 RIF-2... relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/ interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-IR4/L-230AC/4X21 - 2903688 Plug-in industrial relay with power contacts, 4 PDTs, test key, status LED, mechanical switch position indicator, input voltage: 230 V AC     Plug-in module - RIF-V-120-230 UC - 2900948 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor, input voltage: 120 ... 230 V AC/DC ±20 %     04/16/2018   Page 10 / 11 https://www.phoenixcontact.com/gb/products/2903316 Relay Module - RIF-2-RSC-LV-230AC/4X21 - 2903316 Accessories Retaining bracket - RIF-RH-2 - 2900954 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for industrial relay     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 11 / 11