https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in
display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input
voltage: 230 V AC
Key Commercial Data
Packing unit
10 STK
GTIN
GTIN
4046356732475
Weight per Piece (excluding packing)
115.110 g
Custom tariff number
85364900
Country of origin
China
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
27 mm
Height
89 mm
Depth
75 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 50 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
230 V AC
Input voltage range in reference to UN
see diagram
Mains frequency
50/60 Hz
04/16/2018 Page 1 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Technical data
Coil side
Typical input current at UN
6.5 mA
Typical response time
5 ms ... 15 ms
Typical release time range
5 ms ... 20 ms
Coil voltage
230 V AC
Protective circuit
Varistor
Operating voltage display
Yellow LED
Contact side
Contact type
2 PDT
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (At 24 mA)
Min. switching current
5 mA (at 24 V)
Maximum inrush current
30 A (20 ms, N/O contact)
Limiting continuous current
8.5 A (see diagram)
Interrupting rating (ohmic load) max.
204 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
2125 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
3 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
Connection data input side
Connection name
Input side
Connection method
Screw connection
Stripping length
8 mm
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section flexible
0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG
20 ... 10 (solid)
20 ... 12 (stranded)
Torque
0.5 Nm ... 0.6 Nm
04/16/2018 Page 2 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Technical data
Connection data output side
Connection name
Contact side
Connection method
Screw connection
Stripping length
8 mm
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section flexible
0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG
20 ... 10 (solid)
20 ... 12 (stranded)
Torque
0.5 Nm ... 0.6 Nm
General
Test voltage relay winding/relay contact
2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact
2.5 kVrms (50 Hz, 1 min.)
Operating mode
100% operating factor
Degree of protection
IP20 (Relay base)
RT I (Relay)
Mechanical service life
Approx. 2x 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Standards and Regulations
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V AC
Rated surge voltage
4 kV
Insulation
Basic insulation
Degree of pollution
2
Overvoltage category
III
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
04/16/2018 Page 3 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Circuit diagram
42
12
44
14
Diagram
11
10
Limiting continuous current per contact [A]
9
11
41
A2
A1
AC coils
8
7
6
5
4
3
2
1
20
30
40
50
60
70
Ambient temperature [°C]
80
DC coil
AC coil
Contact derating
1,8
1,7
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
20
Diagram
20
Switching current [A]
Coil voltage U/UN
Diagram
10
6
4
2
1
0,5
0,3
0,2
0,1
30
40
50
60
70
Ambient temperature [°C]
DC coil (observe contact derating)
AC coil (observe contact derating)
10
80
20
50 70 100
200
Switching voltage [V]
300
AC, ohmic load
DC, ohmic load
Operating voltage range
Interrupting rating
Diagram
10
30
Diagram
7
Cycles
1
0,9
6
10
Reduction factor
10
5
0
1
2
Switching capacity [kVA]
3
0,8
0,7
0,6
0,5
0,4
0,3
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
COS j
! 250 V AC, ohmic load
Electrical service life
Service life reduction factor
04/16/2018 Page 4 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Articles in set
Relay base - RIF-2-BSC/4X21 - 2900932
RIF-2... relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
Single relay - REL-IR2/L-230AC/2X21 - 2903668
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, mechanical switch position indicator, input
voltage: 230 V AC
Plug-in module - RIF-V-120-230 UC - 2900948
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor, input voltage: 120 ... 230 V AC/DC ±20
%
Retaining bracket - RIF-RH-2 - 2900954
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for
industrial relay
Classifications
eCl@ss
eCl@ss 5.0
27371601
eCl@ss 5.1
27371601
eCl@ss 6.0
27371601
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
04/16/2018 Page 5 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Classifications
ETIM
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
Approvals
Approvals
Approvals
DNV GL / CSA / EAC
Ex Approvals
Approval details
DNV GL
http://exchange.dnv.com/tari/
TAA000018V
CSA
http://www.csagroup.org/services-industries/product-listing/
2607057
EAC
RU CDE.A*30.B.01082
Accessories
Accessories
End block
04/16/2018 Page 6 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
04/16/2018 Page 7 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
04/16/2018 Page 8 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Accessories
Plug-in bridge - FBS 2-6 GY - 3032237
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering
field size: 15.45 x 10.5 mm
04/16/2018 Page 9 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Accessories
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering
field size: 15.45 x 5.1 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Spare parts
Relay base - RIF-2-BSC/4X21 - 2900932
RIF-2... relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
Single relay - REL-IR2/L-230AC/2X21 - 2903668
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, mechanical switch position indicator, input
voltage: 230 V AC
Plug-in module - RIF-V-120-230 UC - 2900948
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor, input voltage: 120 ... 230 V AC/DC ±20
%
04/16/2018 Page 10 / 11
https://www.phoenixcontact.com/gb/products/2903321
Relay Module - RIF-2-RSC-LV-230AC/2X21 - 2903321
Accessories
Retaining bracket - RIF-RH-2 - 2900954
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for
industrial relay
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/16/2018 Page 11 / 11