2903331

https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 230 V AC The figure shows the 24 V DC version Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 68.0 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 93 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC Input voltage range in reference to UN see diagram Typical input current at UN 6 mA 04/11/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Technical data Coil side Typical response time 3 ms ... 12 ms Typical release time range 3 ms ... 20 ms Coil voltage 230 V AC Protective circuit Varistor Operating voltage display Yellow LED Contact side Contact type 2 PDT Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 10 mA) Min. switching current 10 mA (At 5 V) Maximum inrush current 12 A (20 ms, N/O contact) Limiting continuous current 8 A (see diagram) Interrupting rating (ohmic load) max. 192 W (at 24 V DC) 124 W (at 48 V DC) 108 W (at 60 V DC) 52 W (at 110 V DC) 48 W (at 220 V DC) 2500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) Conductor cross section AWG 26 ... 16 Connection data output side Connection name Contact side Connection method Push-in connection 04/11/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Technical data Connection data output side Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) Conductor cross section AWG 26 ... 16 General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT III (Relay) Mechanical service life Approx. 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Degree of pollution 2 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Standards/regulations DIN EN 50178 IEC 62103 Insulation Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts. Degree of pollution 2 Overvoltage category III 04/11/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Articles in set Relay socket - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Single relay - REL-MR-230AC/21-21 - 2961451 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 230 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 - 230 V AC/110 V DC ±20%     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371603 eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 eCl@ss 7.0 27371603 04/11/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Classifications eCl@ss eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Approvals Approvals Approvals EAC / GL / LR / EAC Ex Approvals Approvals submitted Approval details EAC  GL  LR  EAC  04/11/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Drawings 22 12 24 14 21 11 A2 Diagram Coil voltage U/UN Circuit diagram A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coils AC coils Operating voltage range Diagram Diagram 11 10 20 9 1 6 4 2 4 1 2 3 0,5 0,3 0,2 0,1 10 1 2 3 4 Interrupting rating 20 30 50 70 100 Switching voltage [V] AC, ohmic load DC, ohmic load, contacts in series DC, ohmic load DC, L/R = 40 ms 200 300 Limiting continuous current per contact [A] Switching current [A] 10 8 7 6 5 4 3 2 1 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coil AC coil Contact derating 04/11/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2903331 Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331 Diagram 10 7 10 6 Diagram Reduction factor Cycles 1 0,9 1 10 10 5 2 0,8 0,7 0,6 0,5 0,4 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Electrical service life Service life reduction factor Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/11/2016   Page 7 / 7