2903337

https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 1 PDT. Input voltage: 24 V AC The figure shows the 24 V DC version Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 76.0 g Custom tariff number 85364110 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 93 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 24 V AC Input voltage range in reference to UN see diagram 04/11/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 Technical data Coil side Mains frequency 50 Hz 60 Hz Typical input current at UN 33 mA Typical response time 3 ms ... 12 ms Typical release time range 3 ms ... 20 ms Coil voltage 24 V AC Protective circuit Varistor Operating voltage display Yellow LED Contact side Contact type 1 PDT Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, AC15) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Limiting continuous current 25 A (20 ms, N/O contact) Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 240 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 2 A (at 24 V, AC15) 2 A (at 120 V, AC15) 2 A (at 250 V, AC15) 04/11/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 Technical data General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT II (Relay) Mechanical service life Approx. 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Rated insulation voltage 250 V AC Degree of pollution 2 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations Standards/regulations DIN EN 50178 IEC 62103 Rated insulation voltage 250 V AC Insulation safe isolation Degree of pollution 2 Overvoltage category III Articles in set Relay socket - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     04/11/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 Articles in set Single relay - REL-MR- 24AC/21HC AU - 2961503 Plug-in miniature power relay, with multi-layer gold contact for high continuous currents, 1 PDT, input voltage 24 V AC     Plug-in module - RIF-LV-12-24 UC - 2900942 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 12 - 24 V AC/DC ±20%     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371603 eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 eCl@ss 7.0 27371603 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001437 04/11/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 Classifications UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Approvals Approvals Approvals EAC / GL / LR Ex Approvals Approvals submitted Approval details EAC  GL  LR  Drawings 04/11/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2903337 Relay Module - RIF-1-RPT-LV-24AC/1X21AU - 2903337 22 12 24 14 21 11 A2 Diagram Coil voltage U/UN Circuit diagram A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coils AC coils Operating voltage range Diagram Diagram 10 6 4 Cycles Switching current [A] 20 2 10 7 10 6 1 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] 300 10 5 10 4 0 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] AC, ohmic load DC, ohmic load DC, L/R = 40 ms 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Interrupting rating Electrical service life Diagram 1 Reduction factor 0,9 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j Service life reduction factor 04/11/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2903337 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/11/2016   Page 7 / 7