2903339

https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 1 PDT. Input voltage: 230 V AC Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356732758 Weight per Piece (excluding packing) 68.000 g Custom tariff number 85364900 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Dimensions Width 16 mm Height 93 mm Depth 75 mm Ambient conditions 08/05/2019   Page 1 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 (Relay base) RT III (Relay) Coil side Nominal input voltage UN 230 V AC Input voltage range in reference to UN see diagram Mains frequency 50/60 Hz Typical input current at UN 6 mA Typical response time 3 ms ... 12 ms Typical release time range 3 ms ... 20 ms Coil voltage 230 V AC Protective circuit Varistor Operating voltage display Yellow LED Power dissipation for nominal condition 1.38 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 25 A (20 ms, N/O contact) Limiting continuous current 10 A (see diagram) Interrupting rating (ohmic load) max. 240 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2500 VA (for 250 V AC) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) 08/05/2019   Page 2 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Technical data General Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life approx. 10 cycles Service life, electrical see diagram Mounting position any Assembly instructions In rows with zero spacing 7 Connection data Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 16 (solid) 26 ... 16 (flexible) Connection data 2 Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 16 (solid) 26 ... 16 (flexible) Standards and Regulations Standards/regulations DIN EN 50178 Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation safe isolation Pollution degree 2 Overvoltage category III Flammability rating according to UL 94 V2 08/05/2019   Page 3 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Articles in set Relay base - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Single relay - REL-MR-230AC/21HC - 2961422 Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 230 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     08/05/2019   Page 4 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 Approvals Approvals Approvals DNV GL / PRS / LR / EAC / EAC Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAA000018V 08/05/2019   Page 5 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Approvals PRS    http://www.prs.pl/  TE/2108/880590/16 LR    http://www.lr.org/en  15/20011 EAC      TR_TS_D_00573_c EAC      TR_TS_S_00010_c Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     08/05/2019   Page 6 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     08/05/2019   Page 7 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     08/05/2019   Page 8 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Accessories Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     08/05/2019   Page 9 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Accessories Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Spare parts Relay base - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     08/05/2019   Page 10 / 11 https://www.phoenixcontact.com/us/products/2903339 Relay Module - RIF-1-RPT-LV-230AC/1X21 - 2903339 Accessories Single relay - REL-MR-230AC/21HC - 2961422 Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 230 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/05/2019   Page 11 / 11