2903351

https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plugin display/interference suppression module, and retaining bracket. Contact type: 1 changeover contact. Input voltage: 230 V AC Key Commercial Data Packing unit 10 STK GTIN GTIN 4046356732093 Weight per Piece (excluding packing) 99.990 g Custom tariff number 85364900 Country of origin China Note Made to Order (non-returnable) Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 89 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC Input voltage range in reference to UN see diagram 04/16/2018   Page 1 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Technical data Coil side Mains frequency 50/60 Hz Typical input current at UN 6 mA Typical response time 3 ms ... 12 ms Typical release time range 3 ms ... 20 ms Coil voltage 230 V AC Protective circuit Varistor Operating voltage display Yellow LED Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, AC15) Contact side (with destroyed gold layer) Contact material AgNi Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Limiting continuous current 25 A (20 ms, N/O contact) Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 240 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 2 A (at 24 V, AC15) 2 A (at 120 V, AC15) 2 A (at 250 V, AC15) Connection data input side 04/16/2018   Page 2 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Technical data Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (stranded) Torque 0.5 Nm ... 0.6 Nm Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² 0.5 mm² ... 4 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm² 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG 20 ... 10 (solid) 20 ... 12 (stranded) Torque 0.5 Nm ... 0.6 Nm General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay base) RT II (Relay) Mechanical service life Approx. 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Standards/regulations DIN EN 50178 Rated insulation voltage 250 V AC 04/16/2018   Page 3 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Technical data Standards and Regulations Rated surge voltage 6 kV Insulation safe isolation Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 22 12 24 14 21 11 A2 Diagram Coil voltage U/UN Circuit diagram A1 AC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 50 60 70 Ambient temperature [°C] 80 DC coils AC coils Operating voltage range Diagram Diagram 10 6 4 Cycles Switching current [A] 20 2 10 7 10 6 1 1 0,5 0,3 0,2 0,1 10 20 30 AC, ohmic load DC, ohmic load DC, L/R = 40 ms Interrupting rating 50 70 100 200 Switching voltage [V] 300 10 5 10 4 0 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Electrical service life 04/16/2018   Page 4 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Diagram 1 Reduction factor 0,9 0,8 0,7 0,6 0,5 0,4 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j Service life reduction factor Articles in set Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR-230AC/21HC AU - 2961529 Plug-in miniature power relay, with multi-layer gold contact for high continuous currents, 1 PDT, input voltage 230 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     04/16/2018   Page 5 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Articles in set Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 Approvals Approvals Approvals DNV GL / EAC Ex Approvals Approval details DNV GL  EAC    http://exchange.dnv.com/tari/  TAA000018V    RU CDE.A*30.B.01082 04/16/2018   Page 6 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     04/16/2018   Page 7 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     04/16/2018   Page 8 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Accessories Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking 04/16/2018   Page 9 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Accessories Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver     Spare parts 04/16/2018   Page 10 / 11 https://www.phoenixcontact.com/gb/products/2903351 Relay Module - RIF-1-RSC-LV-230AC/1X21AU - 2903351 Accessories Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR-230AC/21HC AU - 2961529 Plug-in miniature power relay, with multi-layer gold contact for high continuous currents, 1 PDT, input voltage 230 V AC     Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 11 / 11