2903358

https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 1 changeover contact. Input voltage: 24 V DC Key Commercial Data Packing unit 1 GTIN GTIN 4046356732918 Custom tariff number 85364190 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 89 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 24 V DC Input voltage range in reference to UN see diagram 04/14/2017   Page 1 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Technical data Coil side Typical input current at UN 18 mA Typical response time 8 ms Typical release time 10 ms Coil voltage 24 V DC Protective circuit Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.43 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 50 A (20 ms, N/O contact) Limiting continuous current 11 A (see diagram) Interrupting rating (ohmic load) max. 264 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2750 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 6 mm² Conductor cross section flexible 0.14 mm² ... 4 mm² Conductor cross section AWG 26 ... 10 Connection data output side 04/14/2017   Page 2 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Technical data Connection data output side Connection name Contact side Connection method Screw connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 6 mm² Conductor cross section flexible 0.14 mm² ... 4 mm² Conductor cross section AWG 26 ... 10 General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT III (Relay) Mechanical service life approx. 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Standards/regulations DIN EN 50178 Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation safe isolation Degree of pollution 2 Overvoltage category III Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 04/14/2017   Page 3 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 22 12 24 14 21 11 A2- Diagram Coil voltage U/UN Circuit diagram A1+ DC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 80 50 60 70 Ambient temperature [°C] DC coils AC coils Operating voltage range Diagram Diagram 10 6 4 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] 300 AC, ohmic load DC, ohmic load DC, L/R = 40 ms Interrupting rating Limiting continuous current per contact [A] Switching current [A] 20 13 12 11 10 9 8 7 6 5 4 3 2 1 20 30 40 50 60 70 DC coil Ambient temperature [°C] AC coil DC coil, jumper between 11 and 21 AC coil, jumper between 11 and 21 80 Contact derating Diagram 10 7 10 6 Diagram 1 10 10 2 5 Reduction factor Cycles 1 0,9 0,8 0,7 0,6 0,5 0,4 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Switching current [A] 0,3 1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Electrical service life Service life reduction factor 04/14/2017   Page 4 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Articles in set Relay socket - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR- 24DC/21HC - 2961312 Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 24 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 - 24 V DC ±20%     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 04/14/2017   Page 5 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Classifications ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     04/14/2017   Page 6 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     04/14/2017   Page 7 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, Pitch: 6.2 mm, Length: 3 mm, Width: 10.7 mm, Number of positions: 2, Color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, Pitch: 6.2 mm, Length: 3 mm, Width: 10.7 mm, Number of positions: 2, Color: blue     Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, Pitch: 6.2 mm, Length: 3 mm, Width: 10.7 mm, Number of positions: 2, Color: gray     Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, Pitch: 8.2 mm, Length: 3 mm, Width: 14.7 mm, Number of positions: 2, Color: red     04/14/2017   Page 8 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Accessories Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, Pitch: 8.2 mm, Number of positions: 2, Color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 15.2 mm, Lettering field: 10.5 x 15.1 mm     04/14/2017   Page 9 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Accessories Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, Color: silver     Spare parts Relay socket - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Single relay - REL-MR- 24DC/21HC - 2961312 Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 24 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 - 24 V DC ±20%     04/14/2017   Page 10 / 11 https://www.phoenixcontact.com/us/products/2903358 Relay Module - RIF-1-RSC-LDP-24DC/1X21 - 2903358 Accessories Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/14/2017   Page 11 / 11