https://www.phoenixcontact.com/us/products/2903368
Relay Module - RIF-0-RPT-24DC/21AU - 2903368
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Pre-assembled relay module with push-in connection, consisting of: relay base with ejector and multi-layer gold
contact relay. Contact type: 1 PDT. Input voltage: 24 V DC
Key commercial data
Packing unit
1 pc
Weight per Piece (excluding packing)
28.0 GRM
Custom tariff number
85364110
Country of origin
Germany
Technical data
Dimensions
Width
6.2 mm
Height
93 mm
Depth
78 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
24 V DC
Input voltage range in reference to UN
(see diagram)
Nominal input current at UIN
9 mA
Typical response time
5 ms
Typical release time
8 ms
Operating voltage display
Yellow LED
Protective circuit
Damping diode
3/7/14 Page 1 / 5
https://www.phoenixcontact.com/us/products/2903368
Relay Module - RIF-0-RPT-24DC/21AU - 2903368
Technical data
Contact side
Contact type
1 PDT
Contact material
AgSnO, hard gold-plated
Maximum switching voltage
30 V AC
36 V DC
Minimum switching voltage
100 mV (at 10 mA)
Maximum inrush current
50 mA
Min. switching current
1 mA
Limiting continuous current
50 mA
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
1 A (24 V (DC13))
3 A (230 V (AC 15))
Note
the following values are applicable if a gold layer is destroyed
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (at 100 mA)
Limiting continuous current
6A
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Connection data
Connection method
Push-in connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section stranded min.
0.14 mm²
Conductor cross section stranded max.
1.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section AWG/kcmil min.
26
Conductor cross section AWG/kcmil max
16
Stripping length
8 mm
General
3/7/14 Page 2 / 5
https://www.phoenixcontact.com/us/products/2903368
Relay Module - RIF-0-RPT-24DC/21AU - 2903368
Technical data
General
Test voltage relay winding/relay contact
4 kVrms (50 Hz, 1 min.)
Operating mode
100% operating factor
Degree of protection
IP20 (Relay socket)
RT III (Relay)
Mechanical service life
Approx. 2 x 10 cycles
Standards/regulations
DIN EN 50178
7
IEC 62103
Rated insulation voltage
250 V AC
Pollution degree
2
Surge voltage category
III
Mounting position
any
Assembly instructions
In rows with zero spacing
Articles in set
Single relay - REL-MR- 24DC/21AU - 2961121
Pluggable miniature relays, with multi-layer contact, 1 PDT, input voltage 24 V DC
Relay socket - RIF-0-BPT/21 - 2900958
RIF-0... relay base, for miniature power relay with 1 PDT or solid-state relays of the same design, push-in connection, for
mounting on NS 35/7,5
Classifications
eCl@ss
eCl@ss 4.0
27371102
eCl@ss 4.1
27371102
eCl@ss 5.0
27371603
eCl@ss 5.1
27371603
eCl@ss 6.0
27371603
3/7/14 Page 3 / 5
https://www.phoenixcontact.com/us/products/2903368
Relay Module - RIF-0-RPT-24DC/21AU - 2903368
Classifications
eCl@ss
eCl@ss 7.0
27371603
eCl@ss 8.0
27371603
ETIM
ETIM 3.0
EC001456
ETIM 4.0
EC001456
ETIM 5.0
EC001437
UNSPSC
UNSPSC 6.01
30211917
UNSPSC 7.0901
39121516
UNSPSC 11
39121516
UNSPSC 12.01
39121516
UNSPSC 13.2
39121516
Drawings
Circuit diagram
Diagram
12
Coil voltage U/UN
14
11
A2-
A1+
DC coils
1,8
1,7
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
0
10
20
30
80
40
50
60
70
Ambient temperature [°C]
Maximum continuous voltage at limiting continuous current = 6 A
Minimum operate voltage
For pre-excitation with UN and limiting continuous current = 6 A
Operating voltage range
3/7/14 Page 4 / 5
https://www.phoenixcontact.com/us/products/2903368
Relay Module - RIF-0-RPT-24DC/21AU - 2903368
Diagram
Diagram
10
6
4
1
1
0,9
2
Reduction factor
Switching current [A]
20
1
2
0,5
0,3
0,2
0,1
10
20
30
1 AC, ohmic load
2 DC, ohmic load
50 70 100
200
Switching voltage [V]
300
0,8
0,7
0,6
0,5
0,4
0,3
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
COS j
Interrupting rating
Service life reduction factor
Cycles
Diagram
10
6
10
5
10
1
4
0
2
4
6
8
Switching current [A]
1 250 V AC, ohmic load
Electrical service life
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
3/7/14 Page 5 / 5
