2903639

https://www.phoenixcontact.com/us/products/2903639 Solid-state relays - ST-OV3- 5DC/240AC/3 - 2903639 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 5 V DC, output: 24 - 280 V AC/max. 3 A, can be plugged into basic terminal blocks   Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 53.9 GRM Custom tariff number 85364190 Country of origin Germany Technical data Dimensions Width 20.8 mm Height 33 mm Depth 66.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Input data Nominal input voltage UN 5 V DC ±20 % Switching threshold "0" signal in reference to UN ≤ 0.4 Switching threshold "1" signal in reference to UN ≥ 0.8 Typical input current at UN 10 mA Typical response time switch-on time: Max. one half cycle - zero-voltage crossing 10/24/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2903639 Solid-state relays - ST-OV3- 5DC/240AC/3 - 2903639 Technical data Input data Typical turn-off time switch-off time Max. one half cycle - zero-current crossing Operating voltage display Yellow LED Type of protection Protection against polarity reversal Protective circuit/component Polarity protection diode Transmission frequency 25 Hz Output data Output voltage range 24 V AC ... 280 V AC Limiting continuous current 3 A (see derating curve) Min. load current 50 mA Leakage current 5 mA (in off state - components with low minimum load and leakage currents on request.) Surge current 35 A (t = 10 ms) Max. load value 6 A s (I x t at t = 8.3 ms) Peak offstate voltage 600 V Voltage drop at max. limiting continuous current 1.5 V Output circuit 2-wire, floating Protective circuit/component RC element 2 2 General Test voltage input/output 2.5 kV AC Mounting position any Standards/regulations DIN VDE 0110 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 10/24/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2903639 Solid-state relays - ST-OV3- 5DC/240AC/3 - 2903639 Classifications ETIM ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39121542 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  GOST  Drawings 10/24/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2903639 Solid-state relays - ST-OV3- 5DC/240AC/3 - 2903639 Load current [A] Diagram Circuit diagram 3 2 2 1 1 0 20 30 40 50 60 Ambient temperature [°C] 1 In rows with zero spacing 2 stand-alone device 10/24/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2903639 Solid-state relays - ST-OV3- 5DC/240AC/3 - 2903639 Circuit diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/24/2014   Page 5 / 5