2904607

https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 7.5 A Your advantages  Starting of heavy loads with dynamic boost  Preventive function monitoring indicates critical operating states before errors occur  High efficiency and long service life, with low power dissipation and low heating  Space savings in the control cabinet, thanks to a narrow, slim-line design  Fast and easy startup, thanks to tool-free Push-in connection technology Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626255767 Weight per Piece (excluding packing) 370.700 g Custom tariff number 85044030 Country of origin Germany Technical data Dimensions Width 45 mm Height 106 mm Depth 90 mm Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %) Installation distance right/left (passive) 5 mm / 5 mm (POut ≥50% ) Installation distance right/left (active) 15 mm / 15 mm (POut ≥50% ) Installation distance top/bottom (active, passive) 30 mm / 30 mm (POut ≤50 %) Installation distance top/bottom (passive) 30 mm / 30 mm (POut ≥50% ) 06/17/2020   Page 1 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Technical data Dimensions Installation distance top/bottom (active) 30 mm / 30 mm (POut ≥50% ) Ambient conditions Degree of protection IP20 Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) Ambient temperature (start-up type tested) -40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Installation height ≤ 5000 m (> 2000 m, observe derating) Input data Input voltage range 100 V AC ... 240 V AC -15 % ... +10 % 110 V DC ... 250 V DC -20 % ... +40 % Dielectric strength maximum 300 V AC 60 s Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 % Discharge current to PE < 0.25 mA (264 V AC, 60 Hz) Current consumption 1 A (100 V AC) 0.85 A (120 V AC) 0.46 A (230 V AC) 0.44 A (240 V AC) Nominal power consumption 96.3 VA Inrush current typ. 11.4 A (at 25 °C) Mains buffering time typ. 48 ms (120 V AC) typ. 48 ms (230 V AC) Input fuse 3.15 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A (Characteristic B, C or comparable) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 12 V DC Setting range of the output voltage (USet) 12 V DC ... 15 V DC (constant capacity) Nominal output current (IN) 7.5 A Dynamic Boost (IDyn.Boost) 12.75 A (≤ 60 °C (5 s)) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance ≤ 25 V DC Protection against overvoltage at the output (OVP) ≤ 18 V DC Control deviation < 0.3 % (Static load change 10 % ... 90 %) 06/17/2020   Page 2 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Technical data Output data < 3 % (Dynamic load change 10 % ... 90 %, (10 Hz)) < 0.1 % (change in input voltage ±10 %) Residual ripple < 35 mVPP (with nominal values) Output power 90 W Typical response time 300 ms Maximum power dissipation in no-load condition < 0.6 W (230 V AC) < 0.6 W (120 V AC) Power loss nominal load max. < 8.1 W (120 V AC) < 7.1 W (230 V AC) General Net weight 0.3 kg Efficiency typ. 91.5 % (120 V AC) typ. 92.5 % (230 V AC) MTBF (IEC 61709, SN 29500) > 1221000 h (25 °C) > 671000 h (40 °C) > 248000 h (60 °C) Insulation voltage input/output 4 kV AC (type test) 3 kV AC (routine test) Degree of protection IP20 Protection class II Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Connection data, input Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 10 mm Connection data, output Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 10 mm 06/17/2020   Page 3 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Technical data Connection data for signaling Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 10 mm Standards Standard - Safety of transformers EN 61558-2-16 Standard - safety for equipment for measurement, control, and laboratory use IEC 61010-1 Standard – Safety extra-low voltage IEC 61010-1 (SELV) IEC 61010-2-201 (PELV) Standard - Safe isolation IEC 61558-2-16 Standard – Limitation of mains harmonic currents EN 61000-3-2 Conformance/approvals UL approvals UL Listed UL 61010-1 UL Listed UL 61010-2-201 ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location) SIQ CB-Scheme (IEC 61010-1, IEC 61010-2-201) EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Conducted noise emission EN 55016 EN 61000-6-3 (Class B) Noise emission EN 55016 EN 61000-6-3 (Class B) Harmonic currents EN 61000-3-2 EN 61000-3-2 (Class A) Flicker EN 61000-3-3 Electrostatic discharge EN 61000-4-2 Contact discharge 8 kV (Test Level 4) Discharge in air 15 kV (Test Level 4) Electromagnetic HF field EN 61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 20 V/m (Test Level 3) Frequency range 1 GHz ... 6 GHz Test field strength 10 V/m (Test Level 3) Comments Criterion A 06/17/2020   Page 4 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Technical data EMC data Fast transients (burst) EN 61000-4-4 Input 4 kV (Test Level 4 - asymmetrical) Output 4 kV (Test Level 4 - asymmetrical) Signal 4 kV (Test Level 4 - asymmetrical) Comments Criterion A Surge voltage load (surge) EN 61000-4-5 Input 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal 0.5 kV (Test Level 2 - symmetrical) Comments Criterion A I/O/S asymmetrical Frequency range 0.15 MHz ... 80 MHz Voltage 10 V (Test Level 3) Comments Criterion A Frequency 16.67 Hz 50 Hz 60 Hz Test field strength 100 A/m Additional text 60 s Comments Criterion A Frequency 50 Hz 60 Hz Test field strength 1 kA/m Additional text 3s Frequency 0 Hz Test field strength 300 A/m Additional text DC, 60 s Voltage dips EN 61000-4-11 Voltage 100 V AC Frequency 60 Hz Voltage dip 70 % Number of periods 0.5 / 1 / 30 periods Additional text Test Level 2 Comments Criterion A Voltage dip 40 % Number of periods 5 / 10 / 50 periods Additional text Test Level 2 Comments Criterion B 06/17/2020   Page 5 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Technical data EMC data Voltage dip 0% Number of periods 0.5 / 1 / 5 / 50 periods Additional text Test Level 2 Comments Criterion B Pulse-shape magnetic field EN 61000-4-9 Test field strength 1000 A/m Comments Criterion A Attenuated sinusoidal oscillations (ring wave) EN 61000-4-12 Input 2 kV (symmetrical) 4 kV (asymmetrical) Comments Criterion A Asymmetrical conducted disturbance variables EN 61000-4-16 Test level 1 16.67 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3) Voltage 30 V (10 s) Test level 2 16.67 Hz 50 Hz 60 Hz (Test Level 2) Voltage 300 V (1 s) Comments Criterion A Attenuated oscillating wave EN 61000-4-18 Voltage 1 kV (symmetrical) 2.5 kV (asymmetrical) 1 kV (symmetrical) Comments Criterion A Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Criterion C Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. Drawings 06/17/2020   Page 6 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Schematic diagram 06/17/2020   Page 7 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Diagram Diagram 06/17/2020   Page 8 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Diagram Block diagram Classifications eCl@ss eCl@ss 10.0.1 27040701 eCl@ss 5.1 27242213 eCl@ss 6.0 27049000 06/17/2020   Page 9 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Classifications eCl@ss eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 5.0 EC002540 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 13.2 39121004 UNSPSC 18.0 39121004 UNSPSC 19.0 39121004 UNSPSC 20.0 39121004 UNSPSC 21.0 39121004 Approvals Approvals Approvals UL Listed / IECEE CB Scheme / cUL Listed / EAC / DNV GL / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 IECEE CB Scheme    http://www.iecee.org/  SI-7008 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 06/17/2020   Page 10 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Approvals EAC      RU*DE*08.B.01873/19 DNV GL    https://approvalfinder.dnvgl.com/  TAA00001SN cULus Listed       Accessories Accessories Device protection Type 3 surge protection device - PLT-SEC-T3-230-FM-UT - 2907919 Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.     Type 3 surge protection device - PLT-SEC-T3-24-FM-UT - 2907916 Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage 24 V AC/DC.     Type 3 surge protection device - PLT-SEC-T3-230-FM-PT - 2907928 Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.     06/17/2020   Page 11 / 12 https://www.phoenixcontact.com/in/products/2904607 Power supply unit - QUINT4-PS/1AC/12DC/7.5/PT - 2904607 Accessories Type 3 surge protection device - PLT-SEC-T3-24-FM-PT - 2907925 Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage 24 V AC/DC.     Screwdriver tools Screwdriver - SF-SL 0,4X2,0-60 - 1212546 Screwdriver, flat bladed, size: 0.4 x 2.0 x 60 mm, 2-component grip, with non-slip grip     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/17/2020   Page 12 / 12