https://www.phoenixcontact.com/gb/products/2904608
Power supply unit - QUINT4-PS/1AC/12DC/15 - 2904608
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective
fuse breaking) technology, and NFC interface, input: 1-phase, output: 12 V DC/15 A
Product Description
The fourth generation of the high-performance QUINT POWER power supplies ensures superior system availability by means of new functions.
Signaling thresholds and characteristic curves can be individually adjusted via the NFC interface.
The unique SFB technology and preventive function monitoring of the QUINT POWER power supply increase the availability of your application.
Why buy this product
Preventive function monitoring indicates critical operating states before errors occur
Signaling thresholds and characteristic curves that can be adjusted via NFC maximize system availability
Power reserve for easy system extension thanks to static boost with sustained power of up to 125% and ability to start difficult loads thanks to
dynamic boost with up to 200% for 5 seconds
High degree of immunity, thanks to integrated gas-filled surge arrester and mains failure bridging time of more than 20 milliseconds
Robust design thanks to metal housing and wide temperature range from -40°C to +70°C
Worldwide use thanks to the wide range input and international approval package
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4055626355054
Weight per Piece (excluding packing)
1,112.000 g
Custom tariff number
85044030
Country of origin
Thailand
Technical data
Dimensions
Width
50 mm
Height
130 mm
Depth
125 mm
Width with alternative assembly
122 mm
Height with alternative assembly
130 mm
Depth with alternative assembly
53 mm
Ambient conditions
08/28/2018 Page 1 / 6
https://www.phoenixcontact.com/gb/products/2904608
Power supply unit - QUINT4-PS/1AC/12DC/15 - 2904608
Technical data
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)
-40 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Degree of pollution
2
Installation height
≤ 5000 m (> 2000 m, observe derating)
Input data
Nominal input voltage range
100 V AC ... 240 V AC
110 V DC ... 250 V DC
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
110 V DC ... 250 V DC -18 % ... +40 %
Dielectric strength maximum
300 V AC 60 s
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Discharge current to PE
< 3.5 mA
Current consumption
2.4 A (100 V AC)
120 V AC
230 V AC
1.1 A (240 V AC)
Inrush surge current
typ. 15 A (at 25 °C)
Mains buffering
≥ 20 ms (120 V AC)
≥ 20 ms (230 V AC)
Input fuse
8 A (slow-blow, internal)
Choice of suitable circuit breakers
10 A ... 16 A (Characteristic B, C, D, K or comparable)
Type of protection
Transient surge protection
Protective circuit/component
Varistor, gas-filled surge arrester
Output data
Nominal output voltage
12 V DC
Setting range of the output voltage (USet)
12 V DC ... 15 V DC (constant capacity)
Nominal output current (IN)
15 A
Static Boost (IStat.Boost)
18.75 A
Dynamic Boost (IDyn.Boost)
22.5 A (5 s)
Selective Fuse Breaking (ISFB)
90 A (15 ms)
Derating
> 60 °C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
yes
Feedback resistance
≤ 25 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
08/28/2018 Page 2 / 6
https://www.phoenixcontact.com/gb/products/2904608
Power supply unit - QUINT4-PS/1AC/12DC/15 - 2904608
Technical data
Output data
< 4 % (Dynamic load change 10 % ... 90 %, (10 Hz))
< 0.25 % (change in input voltage ±10 %)
Residual ripple
< 50 mVPP (with nominal values)
Output power
180 W
Typical response time
300 ms (from SLEEP MODE)
Maximum power dissipation in no-load condition
< (120 V AC)
< (230 V AC)
Power loss nominal load max.
< (120 V AC)
< (230 V AC)
General
Net weight
1.3 kg
Efficiency
typ. (120 V AC)
typ. (230 V AC)
Insulation voltage input/output
4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE
3.5 kV AC (type test)
2.4 kV AC (routine test)
Insulation voltage output / PE
0.5 kV DC (type test)
0.5 kV DC (routine test)
Protection class
I
Degree of protection
IP20
MTBF (IEC 61709, SN 29500)
> (25 °C)
> (40 °C)
> (60 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active
components, 50 mm vertically
alignable: PN
很抱歉,暂时无法提供与“2904608”相匹配的价格&库存,您可以联系我们找货
免费人工找货