2904617

https://www.phoenixcontact.com/in/products/2904617 Power supply unit - QUINT4-PS/1AC/24DC/20/+ - 2904617 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB Technology (selective fuse breaking), protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 20 A Your advantages  Most powerful output side: easy system expansion, reliable heavy load startup and miniature circuit breaker tripping  Most robust input side: high noise immunity, thanks to integrated gas-filled surge arrester (up to 6 kV) and ≥ 20 ms mains failure buffer time  Most comprehensive signaling: preventive function monitoring reports critical operating states before errors occur  Available pre-configured: from a batch quantity of just 1 Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626355085 Weight per Piece (excluding packing) 1,660.000 g Custom tariff number 85044030 Country of origin Thailand Technical data Dimensions Width 70 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm Depth with alternative assembly 73 mm Installation distance right/left 5 mm / 5 mm Installation distance top/bottom 50 mm / 50 mm Ambient conditions 06/17/2020   Page 1 / 15 https://www.phoenixcontact.com/in/products/2904617 Power supply unit - QUINT4-PS/1AC/24DC/20/+ - 2904617 Technical data Ambient conditions Degree of protection IP20 Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Ambient temperature (operation) -40 °C ... 75 °C (> 60 °C Derating: 2.5 %/K) Ambient temperature (start-up type tested) -40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 100 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Installation height ≤ 5000 m (> 2000 m, observe derating) Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 100 V AC ... 240 V AC -15 % ... +10 % 110 V DC ... 250 V DC -18 % ... +40 % Dielectric strength maximum 300 V AC 60 s Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 % 16.7 Hz (acc. to EN 50163) Discharge current to PE < 3.5 mA Current consumption 6.8 A (100 V AC) 5.5 A (120 V AC) 2.8 A (230 V AC) 2.7 A (240 V AC) Nominal power consumption 520 VA Inrush current typ. 10 A (at 25 °C) Mains buffering time typ. 36 ms (120 V AC) typ. 36 ms (230 V AC) Input fuse 12 A (slow-blow, internal) Recommended breaker for input protection 10 A ... 16 A (Characteristic B, C, D, K or comparable) Type of protection Transient surge protection Protective circuit/component Varistor, gas-filled surge arrester Output data Nominal output voltage 24 V DC Setting range of the output voltage (USet) 24 V DC ... 28 V DC (constant capacity) Nominal output current (IN) 20 A Static Boost (IStat.Boost) 25 A Dynamic Boost (IDyn.Boost) 30 A (5 s) Selective Fuse Breaking (ISFB) 120 A (15 ms) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance ≤ 35 V DC 06/17/2020   Page 2 / 15 https://www.phoenixcontact.com/in/products/2904617 Power supply unit - QUINT4-PS/1AC/24DC/20/+ - 2904617 Technical data Output data Protection against overvoltage at the output (OVP) < 30 V DC (double protection incl. shutdown) Control deviation < 0.5 % (Static load change 10 % ... 90 %) < 2 % (Dynamic load change 10 % ... 90 %, (10 Hz)) < 0.25 % (change in input voltage ±10 %) Residual ripple < 30 mVPP (with nominal values) Output power 480 W Typical response time 300 ms (from SLEEP MODE) Maximum power dissipation in no-load condition < 5 W (120 V AC) < 5 W (230 V AC) Power loss nominal load max. < 38 W (120 V AC) < 30 W (230 V AC) General Net weight 1.3 kg Efficiency typ. 92.7 % (120 V AC) typ. 94.2 % (230 V AC) MTBF (IEC 61709, SN 29500) > 868000 h (25 °C) > 524000 h (40 °C) > 239000 h (60 °C) Insulation voltage input/output 4 kV AC (type test) 2 kV AC (routine test) Degree of protection IP20 Protection class I Inflammability class in acc. with UL 94 (housing / terminal blocks) V0 Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Alignable: horizontally 0 mm at Pout