2905010

https://www.phoenixcontact.com/us/products/2905010 DC/DC converters - QUINT-PS/96-110DC/24DC/10 - 2905010 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (selective fuse breaking) technology, input: 96 - 110 V DC, output: 24 V DC/10 A Product Description QUINT DC/DC converter with maximum functionality DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation. QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore costeffective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur. Your advantages  Reliable starting of difficult loads, thanks to the static POWER BOOST power reserve with up to 125% nominal current permanently  Preventive function monitoring indicates critical operating states before errors occur  Constant voltage: output voltage regenerated even at the end of long cables  Support conversion to various voltage levels  Electrical isolation: for setting up independent supply systems Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356908313 Weight per Piece (excluding packing) 1,160.000 g Custom tariff number 85044030 Country of origin China Technical data Dimensions 08/01/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/2905010 DC/DC converters - QUINT-PS/96-110DC/24DC/10 - 2905010 Technical data Dimensions Width 48 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm Depth with alternative assembly 51 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) Ambient temperature (start-up type tested) -40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Input data Nominal input voltage range 96 V DC ... 110 V DC Input voltage range 67.2 V DC ... 154 V DC Current consumption 3.5 A (96 V DC) 3.1 A (110 V DC) Inrush current < 10 A (typical) Mains buffering time typ. 10 ms (96 V DC) Input fuse 10 A 150 V DC (internal (device protection)) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 24 V DC ±1 % Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) Nominal output current (IN) 10 A (-40 °C ... 60 °C) POWER BOOST (IBoost) 12.5 A (-40°C ... 40°C permanent, UOUT = 24 V DC ) Selective Fuse Breaking (ISFB) 60 A (12 ms) Derating 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance 35 V DC Protection against overvoltage at the output (OVP) < 35 V DC Max. capacitive load unlimited 08/01/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/2905010 DC/DC converters - QUINT-PS/96-110DC/24DC/10 - 2905010 Technical data Output data Active current limitation 18 A Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple < 20 mVPP Peak switching voltages nominal load < 10 mVPP (20 MHz) Maximum power dissipation in no-load condition 4 W (UIN 110 V DC) Power loss nominal load max. 22 W (UIN 110 V DC) General Net weight 0.9 kg Efficiency > 92 % (UIN 96 V DC / UOUT 24 V DC) > 92 % (UIN 110 V DC / UOUT 24 V DC) Insulation voltage input/output 1.5 kV (type test) 1 kV (routine test) Protection class I Degree of protection IP20 MTBF (IEC 61709, SN 29500) > 1357000 h (25 °C) > 772000 h (40 °C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: PN