2905026

https://www.phoenixcontact.com/pi/products/2905026 Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration. Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356915243 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 110.5 mm Depth 120.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Input data Number of inputs 1 Configurable/programmable Yes Voltage input signal 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 07/17/2018   Page 1 / 6 https://www.phoenixcontact.com/pi/products/2905026 Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Technical data Input data 1 V ... 5 V (via DIP switch) 0 V ... 12 V (can be set via software) Current input signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 20 mA ... 0 mA (via DIP switch) 0 mA ... 24 mA (can be set via software) max. input voltage 12 V Max. input current 24 mA Input resistance of voltage input > 120 kΩ Input resistance current input approx. 50 Ω (+ 0.7 V for test diode) Output data Number of outputs 2 Voltage output signal 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 1 V ... 5 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Current output signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 20 mA ... 0 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Max. output voltage approx. 12.3 V Max. output current 24.6 mA Short-circuit current ≤ 25 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output ≤ 600 Ω (per channel) Ripple < 20 mVPP (at 600 Ω) < 20 mVPP (at 600 Ω) Power supply Nominal supply voltage 24 V DC Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Typical current consumption 55 mA (24 V DC) 110 mA (12 V DC) Power consumption 1.5 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load) Connection data 07/17/2018   Page 2 / 6 https://www.phoenixcontact.com/pi/products/2905026 Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Technical data Connection data Connection method Screw connection Single conductor/terminal point, solid, with ferrule, min. 0.2 mm² Single conductor/terminal point, solid, with ferrule, max. 1.5 mm² Single conductor/terminal point, solid, without ferrule, min. 0.2 mm² Single conductor/terminal point, solid, without ferrule, max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Stripping length 10 mm Screw thread M3 General No. of channels 2 Maximum transmission error 0.05 % (of final value) Maximum temperature coefficient 0.01 %/K Step response (10-90%) approx. 140 ms (15 Hz sample rate) approx. 45 ms (60 Hz sample rate) approx. 25 ms (240 Hz sample rate) Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Overvoltage category II Degree of pollution 2 Rated insulation voltage 300 V Test voltage, input/output/supply 3 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color gray Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 GL GL applied for Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 07/17/2018   Page 3 / 6 https://www.phoenixcontact.com/pi/products/2905026 Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Technical data EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 0.2 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 0.1 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 2.8 % Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 GL GL applied for Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 2 HL 1 - HL 2 HL 1 - HL 2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 07/17/2018   Page 4 / 6 https://www.phoenixcontact.com/pi/products/2905026 Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Block diagram Sensor / Field Pictogram OUT IN PLC / DCS S-Port TI– + 1 OUT 1 U, I+ US OUT 2 U, I– TI+ 5 + IN U, I+ 4-wire 5 OUT 1 U, I+ passive active – 2 6 – IN U, I– 6 OUT1 OUT 1 U, I– TI+ + 3 PWR+ OUT 2 U, I+ U, I 7 + active – 4 PWR– OUT 2 U, I– 8 – IN 3 U, I U, I OUT2 passive FM FM POWER PWR– PWR+ 4 Zone 2 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      RU CDE.A*30.B.01082 cULus Listed       07/17/2018   Page 5 / 6 https://www.phoenixcontact.com/pi/products/2905026 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 07/17/2018   Page 6 / 6