2905205

https://www.phoenixcontact.com/us/products/2905205 EMC filter surge protection device - SFP 1-5/120AC/EX - 2905205 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Device surge protection filter to limit powerful surge voltages, mounting on NS 35. Product Description Device protection with interference filter     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 620.0 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 93 mm Width 112 mm Depth 79 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C General Standards/specifications IEC 61643-1 2005 EN 61643-11/A11 2007 UL 1449 ed. 3: 2006 T4 for type 2 UL 1283 ed. 5: 2005 IEC test classification III 10/29/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/2905205 EMC filter surge protection device - SFP 1-5/120AC/EX - 2905205 Technical data General T3 EN type T3 Mounting type DIN rail: 35 mm Color black silver Housing material Aluminum Flammability rating according to UL 94 V-0 Type Rail-mountable module, one-piece Number of positions 2 Surge protection fault message Optical, remote indicator contact For country-specific use in USA, CN, BR Protective circuit Nominal frequency fN 50 Hz 60 Hz Maximum continuous operating voltage UC (L-N) 150 V AC Maximum continuous operating voltage UC (L-PE) 150 V AC Nominal current IN 5 A (72°C) Rated load current IL 5 A (72°C) Residual current IPE ≤ 0.5 mA Nominal discharge current In (8/20) µs (L-N) 3 kA Nominal discharge current In (8/20) µs (L-PE) 3 kA Operating effective current IC at UC ≤ 10 mA Max. discharge current Imax (8/20) µs maximum (L-N) 10 kA Max. discharge current Imax (8/20) µs maximum (L-PE) 10 kA Combination wave UOC 6 kV (3 kA) Energy absorption symmetrical 170 J Enery absorption, asymmetrical 2x 170 J Voltage protection level Up (L-N) ≤ 450 V (at 6 kV/3 kA) Voltage protection level Up (L-PE) ≤ 450 V (at 6 kV/3 kA) Voltage protection level Up (N-PE) ≤ 450 V (at 6 kV/3 kA) Residual voltage at In, (L-N) ≤ 450 V Residual voltage at In, (L-PE) ≤ 450 V Residual voltage at In, (N-PE) ≤ 450 V Response time tA (L-N) ≤ 25 ns Response time tA (L-PE) ≤ 25 ns Response time tA (N-PE) ≤ 25 ns 10/29/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/2905205 EMC filter surge protection device - SFP 1-5/120AC/EX - 2905205 Technical data Protective circuit Inductivity in series 2x 1 mH ±30 % (with current compensation) Capacity (L-N) 2 µF ±10 % (X2, FOW X2-250V) Capacity (L-PE) 2.2 nF ±20 % (Y, FOW X2-250V) Capacity (L-PEN) 2.2 nF ±20 % (Y, FOW X2-250V) Max. required back-up fuse 20 A (gL / gG) 20 A (MCB, > 125 V, AIC: 14 kA) Input attenuation aE, sym. typ. 40 dB (≥ 500 kHz / 50 Ω) Input attenuation aE, asym. typ. 30 dB (≥ 1 MHz / 50 Ω) Indicator/remote signaling Connection name Remote fault indicator contact Switching function PDT, 1-pos. Connection method Pluggable screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Connection data Connection name Input/output Connection method Screw terminal blocks Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 4 mm² Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 6 mm² Screw thread M3 Tightening torque 0.5 Nm ... 0.6 Nm 5 lbf-in. ... 7 lbf-in. Stripping length 8 mm Protective circuit, filter Discharge resistor ≤ 390 kΩ 10/29/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/2905205 EMC filter surge protection device - SFP 1-5/120AC/EX - 2905205 Classifications eCl@ss eCl@ss 5.1 27130801 eCl@ss 6.0 27130806 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSAus / CSA / cULus Recognized / cCSAus Ex Approvals UL Recognized / cUL Recognized / cULus Recognized Approvals submitted Approval details UL Recognized  cUL Recognized  CSAus  CSA  cULus Recognized  cCSAus  Drawings 10/29/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/2905205 EMC filter surge protection device - SFP 1-5/120AC/EX - 2905205 Circuit diagram Diagram NO 14 COM 11 NC 12 100 aE 80 L L IN OUT 60 dB 40 N N 20 0 10 kHz 1 kHz symmetrical asymmetrical 100 kHz 1 MHz 10 MHz Frequency Dimensional drawing 79 112 86,6 Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/29/2015   Page 5 / 5