2905220

https://www.phoenixcontact.com/us/products/2905220 EMC filter surge protection device - SFP 1-20/120AC/EX - 2905220 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Device protection, according to type 3/class III, with network interference suppression filter to prevent highfrequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact. Can be used in potentially explosive areas in zone 2. Product Description Device protection with interference filter Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 620.000 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 93 mm Width 112 mm Depth 79 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 40 °C Ambient temperature (storage/transport) -40 °C ... 85 °C General IEC test classification III T3 EN type T3 Mounting type DIN rail: 35 mm 07/30/2017   Page 1 / 5 https://www.phoenixcontact.com/us/products/2905220 EMC filter surge protection device - SFP 1-20/120AC/EX - 2905220 Technical data General Color black silver Housing material Aluminum Flammability rating according to UL 94 V-0 Type Rail-mountable module, one-piece Number of positions 2 Surge protection fault message Optical, remote indicator contact For country-specific use in USA, CN, BR Protective circuit Nominal frequency fN 50 Hz 60 Hz Maximum continuous operating voltage UC (L-N) 150 V AC 150 V AC Nominal current IN 20 A (40 °C) Rated load current IL 20 A (40 °C) Residual current IPE ≤ 0.5 mA Nominal discharge current In (8/20) µs (L-N) 3 kA Nominal discharge current In (8/20) µs (L-PE) 3 kA Operating effective current IC at UC ≤ 10 mA Max. discharge current Imax (8/20) µs maximum (L-N) 10 kA Max. discharge current Imax (8/20) µs maximum (L-PE) 10 kA Combination wave UOC 6 kV (3 kA) Energy absorption symmetrical 170 J Enery absorption, asymmetrical 2x 170 J Voltage protection level Up (L-N) ≤ 450 V (at 6 kV/3 kA) Voltage protection level Up (L-PE) ≤ 450 V (at 6 kV/3 kA) Voltage protection level Up (N-PE) ≤ 450 V (at 6 kV/3 kA) Residual voltage at In, (L-N) ≤ 450 V Residual voltage at In, (L-PE) ≤ 450 V Residual voltage at In, (N-PE) ≤ 450 V Response time tA (L-N) ≤ 25 ns Response time tA (L-PE) ≤ 25 ns Response time tA (N-PE) ≤ 25 ns Inductivity in series 2x 1 mH ±30 % (with current compensation) Capacity (L-N) 2 µF ±10 % (X2, FOW X2-250V) Capacity (L-PE) 2.2 nF ±20 % (Y, FOW X2-250V) 07/30/2017   Page 2 / 5 https://www.phoenixcontact.com/us/products/2905220 EMC filter surge protection device - SFP 1-20/120AC/EX - 2905220 Technical data Protective circuit Capacity (L-PEN) 2.2 nF ±20 % (Y, FOW X2-250V) Max. required back-up fuse 20 A (gL / gG) 20 A (MCB, > 125 V, AIC: 14 kA) Input attenuation aE, sym. typ. 40 dB (≥ 500 kHz / 50 Ω) Input attenuation aE, asym. typ. 30 dB (≥ 1 MHz / 50 Ω) Indicator/remote signaling Switching function PDT contact Connection method Pluggable screw connection Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Connection data Connection name Input/output Connection method Screw terminal blocks Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 4 mm² Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 6 mm² Screw thread M3 Tightening torque 0.5 Nm ... 0.6 Nm 5 lbf-in. ... 7 lbf-in. Stripping length 8 mm Protective circuit, filter Discharge resistance ≤ 390 kΩ Clamping voltage ringwave (L-N) 100 V (category A 100 kHz 6 kV/200 A) 195 V (category B 100 kHz 6 kV/500 A) Clamping voltage ringwave (L-PE) 390 V (category A 100 kHz 6 kV/200 A) 390 V (category B 100 kHz 6 kV/500 A) Drawings 07/30/2017   Page 3 / 5 https://www.phoenixcontact.com/us/products/2905220 EMC filter surge protection device - SFP 1-20/120AC/EX - 2905220 Circuit diagram Diagram NO 14 COM 11 NC 12 100 aE 80 L L IN OUT 60 dB 40 N N 20 0 10 kHz 1 kHz symmetrical asymmetrical 100 kHz 1 MHz 10 MHz Frequency Dimensional drawing 79 112 86,6 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130806 eCl@ss 7.0 27130806 ETIM ETIM 2.0 EC000942 ETIM 3.0 EC000942 ETIM 4.0 EC000942 UNSPSC UNSPSC 6.01 30212010 07/30/2017   Page 4 / 5 https://www.phoenixcontact.com/us/products/2905220 EMC filter surge protection device - SFP 1-20/120AC/EX - 2905220 Classifications UNSPSC UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 07/30/2017   Page 5 / 5