2905341

https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in surge arrester, in accordance with Type 2/Class II, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE). Your advantages  Varistor arrester with a low leakage current  High-performance gas-filled surge arrester for N/PE protection  Extremely narrow design, just 12 mm per position  High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations  Pluggable  Low voltage protection level of 1.5 kV  Optical, mechanical status indicator  With floating remote indication contact as an option  Plugs can be checked with CHECKMASTER 2 Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356948043 Weight per Piece (excluding packing) 220.000 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 89.9 mm 07/19/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Technical data Dimensions Width 25.4 mm Depth 74.5 mm (incl. DIN rail 7.5 mm) Horizontal pitch 1.4 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General IEC test classification II T2 EN type T2 IEC power supply system TN-S TT Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color light grey RAL 7035 traffic grey A RAL 7042 Housing material PA 6.6-FR 20 % GF PBT-FR Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 2 Surge protection fault message optical Protective circuit Nominal voltage UN 240 V AC (TN-S) 240 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-N) 350 V AC Maximum continuous operating voltage UC (L-PE) 350 V AC 07/19/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Technical data Protective circuit Maximum continuous voltage UC (N-PE) 264 V AC Rated load current IL 40 A (Biconnect M4 fork-type cable lug 6 mm²) 63 A (TWIN ferrule 2 x 10 mm²) Residual current IPE ≤ 1 µA Nominal discharge current In (8/20) µs 20 kA Maximum discharge current Imax (8/20) µs 40 kA Follow current interrupt rating Ifi (N-PE) 100 A (264 V AC) Short-circuit current rating ISCCR 25 kA (for a backup fuse of up to 315 A gG) 50 kA (for a backup fuse of up to 200 A gG) Voltage protection level Up (L-N) ≤ 1.5 kV Voltage protection level Up (L-PE) ≤ 1.9 kV Voltage protection level Up (N-PE) ≤ 1.5 kV Residual voltage Ures (L-N) ≤ 1.5 kV (at In) ≤ 1.3 kV (at 10 kA) ≤ 1.2 kV (at 5 kA) ≤ 1.1 kV (at 4 kA) ≤ 1 kV (at 2 kA) Residual voltage Ures (L-PE) ≤ 1.9 kV (at In) ≤ 1.5 kV (at 10 kA) ≤ 1.4 kV (at 5 kA) ≤ 1.3 kV (at 4 kA) ≤ 1.2 kV (at 2 kA) Residual voltage Ures (N-PE) ≤ 0.5 kV (at In) ≤ 0.5 kV (at 10 kA) ≤ 0.5 kV (at 5 kA) ≤ 0.5 kV (at 4 kA) ≤ 0.5 kV (at 2 kA) TOV behavior at UT (L-N) 415 V AC (5 s / withstand mode) 457 V AC (120 min / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA (L-N) ≤ 25 ns Response time tA (L-PE) ≤ 100 ns Response time tA (N-PE) ≤ 100 ns Max. backup fuse with V-type through wiring 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) 63 A (gG / TWIN ferrule 2x 10mm²) Max. backup fuse with branch wiring 315 A (gG) 07/19/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Technical data Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm Conductor cross section flexible 2.5 mm² ... 16 mm² Conductor cross section solid 2.5 mm² ... 25 mm² Conductor cross section AWG 12 ... 4 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm² ... 6 mm² UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-N) 350 V AC Maximum continuous operating voltage MCOV (L-G) 350 V AC Maximum continuous operating voltage MCOV (N-G) 264 V AC Nom. voltage 240 V AC Mode of protection L-N L-G N-G Power distribution system Single phase Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-N) 2000 V Measured limiting voltage MLV (L-G) 2080 V Measured limiting voltage MLV (N-G) 950 V Nominal discharge current In (L-N) 20 kA Nominal discharge current In (L-G) 20 kA Nominal discharge current In (N-G) 20 kA UL connection data Conductor cross section AWG 14 ... 2 (solid) 14 ... 4 (flexible) Tightening torque 40 lbf-in. ... 50 lbf-in. Standards and Regulations Standards/regulations IEC 61643-11 2011 EN 61643-11 2012 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e 07/19/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Technical data Environmental Product Compliance No hazardous substances above threshold values Drawings Product drawing Circuit diagram 07/19/2020   Page 5 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Dimensional drawing Classifications eCl@ss eCl@ss 10.0.1 27130805 eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 5.0 EC000941 ETIM 6.0 EC000941 ETIM 7.0 EC000941 UNSPSC UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 07/19/2020   Page 6 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Classifications UNSPSC UNSPSC 21.0 39121620 Approvals Approvals Approvals DNV GL / CCA / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details DNV GL   CCA   https://approvalfinder.dnvgl.com/  TAE000023D    NTR-NL 7347 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 KEMA-KEUR    http://www.dekra-certification.com  2196453.01 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 330181 IECEE CB Scheme    http://www.iecee.org/  NL-34356 07/19/2020   Page 7 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Approvals EAC  cULus Recognized      RU CDE.A*30.B01561      Accessories Accessories Device marking Label - EML (20XE)R - 0803452 Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20˽mm     Label - EML (20XE)R YE - 0803453 Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20˽mm     Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     07/19/2020   Page 8 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Accessories Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Labeled device marker Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576 Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589 Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5     Marker pen 07/19/2020   Page 9 / 10 https://www.phoenixcontact.com/us/products/2905341 Type 2 surge arrester - VAL-SEC-T2-1S-350 - 2905341 Accessories Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Terminal marking Flat zack marker sheet - ZBFM 5/WH:UNBEDRUCKT - 0803595 Flat zack marker sheet, Sheet, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 5 x 4.5 mm, Number of individual labels: 120     Spare parts Type 2 surge protection plug - VAL-SEC-T2-350-P - 2905346 Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths.     Type 2 surge protection plug - VAL-SEC-T2-N/PE-350-P - 2905347 Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/19/2020   Page 10 / 10