https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
4-way power supply doubler with plug-in connection technology. HART-transparent, 0(4) mA ... 20 mA input
signal, 0(4) mA ... 20 mA output signals. The device can be used in both signal and power supply doubler
modes. Push-in connection technology.
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356999441
Weight per Piece (excluding packing)
120.000 g
Sales Key
CK1411
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be
minimal deviations.
Input data
07/16/2019 Page 1 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Technical data
Input data
Description of the input
Current input (sensor circuit)
Number of inputs
1
Current input signal
4 mA ... 20 mA ()
0 mA ... 20 mA ()
Input resistance current input
90 Ω (+1.6 V)
Transmitter supply voltage
> 19.5 V
Output data
Output name
Current output
Number of outputs
2
Current output signal
4 mA ... 20 mA (repeater power supply and isolator operation)
0 mA ... 20 mA (isolator operation)
Max. output current
25 mA
Load/output load current output
≤ 500 Ω (per channel)
Ripple
< 20 mVPP (at 500 Ω)
Transmission Behavior
1:1 to input signal
Power supply
Nominal supply voltage
24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail according to
EN 60715))
Typical current consumption
40 mA ()
65 mA ()
75 mA ()
130 mA ()
Power consumption
1.6 W (at IOUT = 20 mA, 500 Ω load)
Connection data
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12 (flexible)
General
No. of channels
2
Maximum transmission error
0.05 % (of final value)
Maximum temperature coefficient
0.0075 %/K
Limit frequency (3 dB)
> 1 kHz (typ.)
Step response (10-90%)
< 400 µs (typ.)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
07/16/2019 Page 2 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Technical data
General
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
300 V
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be
minimal deviations.
Color
gray
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T5
Class I, Zone 2, Group IIC T5
Certificate of classification
DNV GL TAA000021E
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Data communication (bypass)
Limit frequency (3 dB)
approx. 1 kHz
EMC data
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Standards/regulations
EN 61000-4-2
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation
Conducted interferences
07/16/2019 Page 3 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Technical data
Standards and Regulations
Standards/regulations
EN 61000-4-6
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T5
Class I, Zone 2, Group IIC T5
DNV GL-Temperature
B
DNV GL-Humidity
B
DNV GL-Vibration
A
DNV GL-EMC
A
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon
installation on board
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Block diagram
IN
Sensor / Field
PWR IN+
OUT
TI+
+ 1
1
2
PLC / DCS
TI+
5 +
PWR OUT+
/IN –
2-wire
OUT I-
Pictogram
5
OUT 1 I+
– 2
pas.
6 –
6
OUT1
OUT 1 I-
IN I- / IN I+
TI+
+ 3
PWR+
OUT 2 I+
POWER
8 –
– 4
OUT I–
3
OUT I+
2
I
OUT2
FM
POWER
pas.
4-wire
I
IN
FM
PWR–
PWR+
US
PWR-
OUT 2 I–
1
I
7 +
4
Zone 2
Classifications
eCl@ss
eCl@ss 4.0
27210120
eCl@ss 4.1
27210120
07/16/2019 Page 4 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Classifications
eCl@ss
eCl@ss 5.0
27210120
eCl@ss 5.1
27210100
eCl@ss 6.0
27210100
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
ETIM 7.0
EC002653
Approvals
Approvals
Approvals
UL Listed / cUL Listed / DNV GL / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
DNV GL
https://approvalfinder.dnvgl.com/
TAA000021E
cULus Listed
07/16/2019 Page 5 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Accessories
Communication module
Communication module - MINI MCR-2-V8-MOD-RTU - 2905634
Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a
Modbus/RTU network via a communication adapter.
Communication module - MINI MCR-2-V8-MOD-TCP - 2905635
Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a
Modbus/TCP network via a communication adapter.
Communication module - MINI MCR-2-V8-PB-DP - 2905636
Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a
PROFIBUS DP network via a communication adapter.
Device marking
Marker for end clamp - UCT-EM (30X5) - 0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE - 0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm
07/16/2019 Page 6 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Plastic label - UC-EMLP (15X5) - 0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK
CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE - 0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK
CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR - 0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK
CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) - 0828790
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE - 0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
07/16/2019 Page 7 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Plastic label - US-EMLP (15X5) SR - 0828874
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Evaluation unit
Monitoring module - MINI MCR-2-FM-RC - 2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the
FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology,
standard configuration
Monitoring module - MINI MCR-2-FM-RC-PT - 2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology,
standard configuration
Labeled device marker
Marker for end clamp - UCT-EM (30X5) CUS - 0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
07/16/2019 Page 8 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Plastic label - UC-EMLP (15X5) CUS - 0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE CUS - 0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR CUS - 0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) CUS - 0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
07/16/2019 Page 9 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Plastic label - US-EMLP (15X5) YE CUS - 0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR CUS - 0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Power module
Power terminal block - MINI MCR-2-PTB - 2902066
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
Power terminal block - MINI MCR-2-PTB-PT - 2902067
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
07/16/2019 Page 10 / 12
https://www.phoenixcontact.com/au/products/2905629
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
Accessories
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
Programming cable
Cable adapter - GW HART USB MODEM - 1003824
USB HART modem cable for communication between a PC and HART devices, cable length: 1m.
System adapter
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal
cabling effort and without any errors using system adapters and system cabling.
Terminal marking
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type:
adhesive, for terminal block width: 5 mm, lettering field size: continuous x 5 mm
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according
to EN 60715
07/16/2019 Page 11 / 12
https://www.phoenixcontact.com/au/products/2905629
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
07/16/2019 Page 12 / 12
