2905636

https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Eight MINI Analog Pro signal conditioners and measuring transducers can be quickly and easily integrated into a PROFIBUS DP network via a communication adapter. Product Description Thanks to its innovative plug-in concept, the communication adapter offers a time-saving wiring solution. Eight MINI Analog Pro signal converters can be quickly and easily integrated into a PROFIBUS DP network using a communication adapter. Flexible signal combinations and eliminating the need for I/O input cards saves space and money in the control cabinet. Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356996723 Weight per Piece (excluding packing) 136.000 g Custom tariff number 85389099 Country of origin Germany Note Made to Order (non-returnable) Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 51.1 mm Height 104.1 mm Depth 56.8 mm Supply Nominal supply voltage range 12 V ... 24 V Supply voltage range 9.6 V ... 30 V Typical current consumption 160 mA (at 9.6 V DC) 04/16/2018   Page 1 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Technical data Supply Power consumption < 700 mW Input data Available input sources floating switch contact Current source Number of inputs 8 Configurable/programmable Yes Current input signal 4 mA ... 20 mA Maximum input current 24 mA Input resistance current input 50 Ω Maximum input voltage 5V Output data Number of outputs 1 Configurable/programmable Yes Transmission speed 12 Mbps Data update rate 15 ms General Maximum transmission error 0.1 % Maximum temperature coefficient 0.01 % Degree of protection IP20 (Finger safety) Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 Vrms Test voltage, input/output/supply 0.5 kV Status display Green LED Indication Red LED Housing material PBT 7% GF V0 Mounting position any Connection data Connection name Output Connection method D-SUB socket strip Number of positions 9 Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Permissible humidity (operation) 5 % ... 95 % Permissible humidity (storage/transport) 5 % ... 95 % Maximum altitude 4000 m Standards and Regulations 04/16/2018   Page 2 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Technical data Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Conformance CE-compliant UL, USA/Canada UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T5 Class I, Zone 2, Group IIC T5 GL GL applied for Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 5.1 27242608 eCl@ss 6.0 27242608 eCl@ss 7.0 27242608 eCl@ss 8.0 27242608 eCl@ss 9.0 27242608 ETIM ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001604 ETIM 6.0 EC001604 UNSPSC UNSPSC 13.2 32151602 Approvals Approvals Approvals UL Listed / cUL Listed / PROFIBUS / EAC / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed 04/16/2018   Page 3 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705    Z02107  RU CDE.A*30.B.01082   PROFIBUS  EAC     cULus Listed     Accessories Accessories Device marking Marker for end clamp - UCT-EM (30X5) - 0801505 Marker for end clamp, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Marker for end clamp - UCT-EM (30X5) YE - 0830340 Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     04/16/2018   Page 4 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Plastic label - UC-EMLP (15X5) - 0819301 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) YE - 0822615 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) SR - 0828095 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) - 0828790 Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) YE - 0828873 Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     04/16/2018   Page 5 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Plastic label - US-EMLP (15X5) SR - 0828874 Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm     DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Evaluation unit Monitoring module - MINI MCR-2-FM-RC - 2904504 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration     Monitoring module - MINI MCR-2-FM-RC-PT - 2904508 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration     Monitoring module - MINI MCR-2-FM-RC - 2904504 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration     04/16/2018   Page 6 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Monitoring module - MINI MCR-2-FM-RC-PT - 2904508 Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration     Feed-through terminal block Feed-through terminal block - MINI MCR-2-TB - 2902068 Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology     Feed-through terminal block - MINI MCR-2-TB - 2902068 Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology     Frequency transducer Frequency transducer - MINI MCR-2-UI-FRO-PT - 2902032 Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.     Frequency transducer - MINI MCR-2-UI-FRO - 2902031 Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.     04/16/2018   Page 7 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Frequency transducer - MINI MCR-2-UI-FRO-PT-C - 2906202 Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, order configuration.     Frequency transducer - MINI MCR-2-UI-FRO-C - 2906201 Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, order configuration.     Frequency transducer - MINI MCR-2-F-UI - 2902056 Universally configurable frequency transducer for converting frequency and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw connection technology.     Frequency transducer - MINI MCR-2-F-UI-PT - 2902058 Universally configurable frequency transducer for converting frequency and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS-PT 1033201. Push-in connection technology.     Isolating switch transf. Isolation amplifier - MINI MCR-2-NAM-2RO-PT - 2902005 Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs. Configurable via DIP switch. Push-in connection technology.     04/16/2018   Page 8 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Isolation amplifier - MINI MCR-2-NAM-2RO - 2902004 Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs, configurable via DIP switch. Screw connection technology.     Labeled device marker Marker for end clamp - UCT-EM (30X5) CUS - 0801589 Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348 Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm     Plastic label - UC-EMLP (15X5) CUS - 0824550 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - UC-EMLP (15X5) YE CUS - 0824551 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     04/16/2018   Page 9 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Plastic label - UC-EMLP (15X5) SR CUS - 0828099 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) CUS - 0830076 Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) YE CUS - 0830077 Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Plastic label - US-EMLP (15X5) SR CUS - 0830078 Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 15 x 5 mm     Potiposition transducer Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017 Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. push-in connection technology, standard configuration     04/16/2018   Page 10 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Resistance/potiposition transducer - MINI MCR-2-POT-UI - 2902016 Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, standard configuration     Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT-C - 2905006 Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Push-in connection technology, order configuration     Resistance/potiposition transducer - MINI MCR-2-POT-UI-C - 2905005 Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, order configuration     Power module Power terminal block - MINI MCR-2-PTB - 2902066 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology     Power terminal block - MINI MCR-2-PTB-PT - 2902067 Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology     Programming adapter 04/16/2018   Page 11 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Adapter - IFS-BT-PROG-ADAPTER - 2905872 Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog, MINI Analog Pro, MACX Analog, INTERFACE system gateways, and PLC logic device series.     Programming adapter - IFS-USB-PROG-ADAPTER - 2811271 Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers.     Programming adapter - TWN4 MIFARE NFC USB ADAPTER - 2909681 Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFCcapable products from PHOENIX CONTACT with software. No separate USB driver is required.     Repeater power supplies Repeater power supply - MINI MCR-2-RPSS-I-I-PT - 2902015 3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection technology     Repeater power supply - MINI MCR-2-RPSS-I-I - 2902014 3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. Screw connection technology     04/16/2018   Page 12 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629 4-way power supply doubler with plug-in connection technology. HART transparent, 0(4) ... 20 mA input signal, 0(4)...20 mA output signals. The device can be used in both isolator and repeater power supply mode on active as well as passive analog input cards. Push-in connection technology.     Repeater power supply - MINI MCR-2-RPSS-I-2I - 2905628 4-way power supply doubler with plug-in connection technology. HART transparent, 0(4) ... 20 mA input signal, 0(4)...20 mA output signals. The device can be used in both isolator and repeater power supply mode on active as well as passive analog input cards. Screw connection technology.     Signal conditioner Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028 Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.     Signal conditioner - MINI MCR-2-UNI-UI-UIRO - 2902026 Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.     Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT-C - 2902027 Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, order configuration.     04/16/2018   Page 13 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Signal conditioner - MINI MCR-2-UNI-UI-UIRO-C - 2902024 Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, order configuration.     Signal conditioner - MINI MCR-2-UI-UI-PT - 2902040 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard configuration.     Signal conditioner - MINI MCR-2-UI-UI - 2902037 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.     Signal conditioner - MINI MCR-2-UI-UI-PT-C - 2902039 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, order configuration.     Signal conditioner - MINI MCR-2-UI-UI-C - 2902036 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, order configuration.     04/16/2018   Page 14 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Signal conditioner - MINI MCR-2-U-UI-PT - 2902021 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the mV and V range, unipolar as well as bipolar. Push-in connection technology, standard configuration.     Signal conditioner - MINI MCR-2-U-UI - 2902019 3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the mV and V range, unipolar as well as bipolar. Screw connection technology, standard configuration.     Signal conditioner - MINI MCR-2-U-I0-PT - 2902023 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 0 ... 20 mA, push-in connection technology     Signal conditioner - MINI MCR-2-U-I0 - 2902022 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 0 ... 20 mA, screw connection technology     Signal conditioner - MINI MCR-2-U-I4-PT - 2902030 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 4 ... 20 mA, push-in connection technology     Signal conditioner - MINI MCR-2-U-I4 - 2902029 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 ... 10 V, output signal: 4 ... 20 mA, screw connection technology     04/16/2018   Page 15 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Signal conditioner - MINI MCR-2-I-I-PT - 2901999 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, push-in connection technology.     Signal conditioner - MINI MCR-2-I-I - 2901998 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, screw connection technology     Loop-powered isolators - MINI MCR-2-I-I-ILP-PT - 2901995 Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.     Loop-powered isolators - MINI MCR-2-I-I-ILP - 2901994 Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Screw connection technology.     Signal duplicator Signal duplicator - MINI MCR-2-UNI-UI-2UI-PT - 2905028 Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.     04/16/2018   Page 16 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026 Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.     Signal duplicator - MINI MCR-2-UNI-UI-2UI-PT-C - 2905027 Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, order configuration.     Signal duplicator - MINI MCR-2-UNI-UI-2UI-C - 2905025 Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, order configuration.     Temperature transmitter Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-PT - 2902052 Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection technology, standard configuration     Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI - 2902049 Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. Screw connection technology, standard configuration     04/16/2018   Page 17 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-PT-C - 2902051 Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection technology, order configuration     Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-C - 2902048 Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. Screw connection technology, order configuration     Thermocouple measuring transducer - MINI MCR-2-TC-UI-PT - 2905249 Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, standard configuration     Thermocouple measuring transducer - MINI MCR-2-TC-UI - 2902055 Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, standard configuration     Thermocouple measuring transducer - MINI MCR-2-TC-UI-PT-C - 2905248 Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, order configuration     04/16/2018   Page 18 / 20 https://www.phoenixcontact.com/gb/products/2905636 Communication module - MINI MCR-2-V8-PB-DP - 2905636 Accessories Thermocouple measuring transducer - MINI MCR-2-TC-UI-C - 2902053 Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, order configuration     Terminal marking Marker strip - SK 5,0 WH:REEL - 0805221 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 5 mm     Threshold value switch Limit value switches - MINI MCR-2-T-REL-PT - 2905633 Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4conductor resistance thermometers and thermocouples. Configurable via DIP switch or software. Push-in connection technology     Limit value switches - MINI MCR-2-T-REL - 2905632 Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4conductor resistance thermometers and thermocouples. Configurable via DIP switch or software, screw connection technology     DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439 DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to EN 60715     04/16/2018   Page 19 / 20 https://www.phoenixcontact.com/gb/products/2905636 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 20 / 20