https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Multi-channel electronic device circuit breaker for protecting four loads at 24 V DC in the event of overload
and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
Why buy this product
Easy device replacement without replanning, thanks to compact design and options for individual adjustments
Circuits can be adjusted without any tools by means of one single pushable LED button
Reliable protection against unintentional adjustment of current values, thanks to electronic locking
Status LEDs in traffic light colors enable instantaneous determination of operating states
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4055626149356
Weight per Piece (excluding packing)
135.700 g
Custom tariff number
85363090
Country of origin
Germany
Technical data
Dimensions
Height
90 mm
Width
36 mm
Depth
98 mm
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Humidity test
96 h, 95% RH, 40°C
Altitude
2000 m
Degree of protection
IP20
08/28/2017 Page 1 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Technical data
General
Flammability rating according to UL 94
V-0
Mounting type
DIN rail: 35 mm
Color
light grey RAL 7035
Protection class
III
Degree of pollution
2
Type
DIN rail module, one-piece
Electrical data
Fuse type
electronic
Rated surge voltage
0.5 kV
Operating voltage
18 V DC ... 30 V DC
Rated voltage
24 V DC
Rated current IN
max. 40 A DC
max. 40 A DC (per terminal position when bridging additional devices via
IN+)
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 A DC (adjustable per output channel)
Measuring tolerance I
typ. 15 %
Rated insulation voltage Ui
30 V (Load circuit)
Feedback resistance
max. 35 V DC
Switch-on delay
0.1 s (Cascaded per output channel)
Required backup fuse
not required, integrated failsafe element
Internal output fuse
15 A DC (per output channel)
Status display
LED (green, yellow, red)
Efficiency
> 99 %
Closed circuit current I0
typ. 33 mA
Power dissipation
typ. 0.8 W (No-load operation)
9 W (Nominal operation)
Module initialization time
1.6 s
Waiting time after switch off of a channel
5 s (of overload / short circuit)
Temperature derating
24 A DC (at 60°C)
28 A DC (at 54°C)
32 A DC (At 47°C)
36 A DC (at 41°C)
40 A DC (at 35°C)
Dielectric strength
max. 35 V DC (Load circuit)
Contact type
without electrical isolation
MTBF (IEC 61709, SN 29500)
8403361 h (at 25°C with 21% load)
3067484 h (at 40°C with 34.25% load)
534188 h (at 60°C with 100% load)
Shutdown time load circuit
≤ 10 ms (for short circuit > 2.0 x IN)
1 s (1.2 ... 2.0 x IN)
08/28/2017 Page 2 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Technical data
Electrical data
Undervoltage shutdown load circuit
≤ 17.8 V DC (active)
≥ 18.8 V DC (inactive)
Surge voltage shutdown load circuit
≥ 30.5 V DC (active)
≤ 29.5 V DC (inactive)
Max. capacitive load load circuit
45000 µF (Depending on the current setting and the short-circuit current
available)
Vibration resistance, frequency
10 Hz ... 150 Hz (58 Hz transmission frequency)
Vibration resistance, acceleration
49 m/s²
Vibration resistance, test duration
150 min. (Per axis and direction)
Remote indication contact
Connection name
Remote indication circuit
Switching function
N/O contact
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 2.5 mm²
DC operating voltage
0 V DC ... 30 V DC
DC operating current
100 mA DC
Connection data
Connection name
Main circuit IN+
Connection method
Push-in connection
Stripping length
15 mm
Conductor cross section solid
0.2 mm² ... 10 mm²
Conductor cross section AWG
15 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 6 mm²
Connection name
Main circuit IN-
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 2.5 mm²
Connection name
Main circuit OUT
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm²
08/28/2017 Page 3 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Technical data
Connection data
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 2.5 mm²
Standards and Regulations
Standards/specifications
EN 61000-6-2
EN 61000-6-3
EN 60068-2-78
UL 508
UL 2367
Drawings
Diagram
Diagram
50
t
s
I [A]
1000
40
30
100
20
10
10
20
30
40
50
60
T [°C]
1
70
0,1
0,01
1
0,5
1,2
2
x IN
Trigger characteristic in the DC range
Dimensional drawing
98
1
1
2
1
3
OUT+
1
2
3
4
2
4
2
OUT+
36
Product drawing
13
13
14
IN-
1
2
1
IN+
4
14
3
CBMC
2
4
CBMC
1
IN+
2
90
IN-
1
3
2
08/28/2017 Page 4 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Application drawing
2
3
OUT+
1
1
+ + - - Output DC 24V 10A
4
2
+
13
14
24V
13
14
Rem
SGnd
Out 1
Out 2
2
4
> 100% Boost
> 75%
> 50%
DC OK
QUINT POWER
IN-
Signal
29,5V
1
3
CBMC
1
IN+
UOut
2
NFC
Group
message
Input AC 100-240 V
N/- L/+
PE
N
L
Classifications
eCl@ss
eCl@ss 5.1
27141116
eCl@ss 6.0
27141116
eCl@ss 8.0
27141116
eCl@ss 9.0
27141116
ETIM
ETIM 5.0
EC000899
ETIM 6.0
EC000899
UNSPSC
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC / UL Listed / cUL Listed / UL Recognized / cULus Listed
08/28/2017 Page 5 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Approvals
Ex Approvals
Approval details
RU CDE.A*30.B01561
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 123528
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 123528
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 317172
cULus Listed
EAC
Accessories
Additional products
Label - EML (10X7)R - 0816663
Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, Mounting type: adhesive,
Lettering field: 10 x 7 mm
Equipment marking - EML-ESD (20X7)R - 0830567
Equipment marking, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, Mounting type: adhesive,
Lettering field: 20 x 7 mm
08/28/2017 Page 6 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Accessories
Power supply unit - QUINT4-PS/1AC/24DC/10 - 2904601
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse
breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/10 A
Power supply unit - QUINT4-PS/1AC/24DC/20 - 2904602
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse
breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
Power supply unit - QUINT4-PS/3AC/24DC/10 - 2904621
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse
breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A
Power supply unit - QUINT4-PS/3AC/24DC/20 - 2904622
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse
breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
Power supply unit - TRIO-PS-2G/1AC/24DC/10 - 2903149
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase,
output: 24 V DC/10 A
08/28/2017 Page 7 / 8
https://www.phoenixcontact.com/gb/products/2906032
Electronic device circuit breaker - CBMC E4 24DC/1-10A NO - 2906032
Accessories
Power supply unit - TRIO-PS-2G/1AC/24DC/20 - 2903151
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single-phase,
output: 24 V DC/20 A
Power supply unit - TRIO-PS-2G/3AC/24DC/5 - 2903153
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output:
24 V DC/5 A
Power supply unit - TRIO-PS-2G/3AC/24DC/10 - 2903154
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output:
24 V DC/10 A
Power supply unit - TRIO-PS-2G/3AC/24DC/20 - 2903155
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output:
24 V DC/20 A
Power supply unit - TRIO-PS-2G/3AC/24DC/40 - 2903156
Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A, dynamic boost,
tool-free fast connection technology for solid and stranded conductors with ferrule
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
08/28/2017 Page 8 / 8