2906061

https://www.phoenixcontact.com/us/products/2906061 Hybrid motor starter - ELR H3-IES-PT-24DC/500AC-06-T - 2906061 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 24 V DC input, 0.6 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection. The figure shows the ELR H3-IESPT- 24DC/500AC-0,6 version Product Features     Key commercial data Packing unit 1 pc Custom tariff number 85371099 Country of origin Germany Technical data Input data Input name Device supply Rated control supply voltage US 24 V DC (According to IEC 60947-1) Voltage range with reference to US 0.8 ... 1.25 Rated control supply current IS ≤ 40 mA Protective circuit Protection against polarity reversal Surge protection Operating voltage display Green LED Status display Yellow LED Indication Red LED Input name Control input Rated actuating voltage UC 24 V DC Voltage range with reference to UC 0.8 ... 1.25 Rated actuating current IC ≤ 5 mA 05/18/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/2906061 Hybrid motor starter - ELR H3-IES-PT-24DC/500AC-06-T - 2906061 Technical data Input data Switching level "safe off" < 5 V DC Protective circuit Protection against polarity reversal Typical response time < 35 ms Typical turn-off time < 40 ms Output data load output Rated operating voltage Ue 500 V AC Operating voltage range 42 V AC ... 550 V AC Load current max. 600 mA (see derating curve) Min. load current 75 mA Trigger characteristic in acc. with IEC 60947 Class 10A Rated operating current at AC-51 0.6 A Rated operating current at AC-53a 0.6 A Leakage current 0 mA Residual voltage < 0.2 V (at Ie) Protective circuit Surge protection Varistor Output data reply output Note Confirmation 01: floating change-over contact, signal contact Contact type 1 PDT Contact material AgSnO2, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV AC/DC (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 100 mA) Min. switching current 10 mA (at 12 V) Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 05/18/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/2906061 Hybrid motor starter - ELR H3-IES-PT-24DC/500AC-06-T - 2906061 Technical data Output data reply output 1500 VA (for 250 V AC) Switching capacity according to IEC 60947-5-1 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) Measuring technology and signaling contact Measuring via Current transformer for line current on L1 and L3 Connection data Connection method Push-in connection Stripping length 10 mm Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 General Mounting position Vertical (horizontal DIN rail) Assembly instructions Can be aligned with spacing = 20 mm Operating mode 100% operating factor Designation Standards/regulations Standards/regulations IEC 60947-1 EN 60947-4-2 IEC 61508 ISO 13849 Designation Air clearances and creepage distances between the power circuits Standards/regulations DIN EN 50178 Rated surge voltage 6 kV Insulation Safe isolation (EN 50178) for mains voltage ≤ 500 V AC Safe isolation (IEC 60947-1) for mains voltage ≤ 300 V AC Basic insulation (IEC 60947-1) for mains voltage of 300 ... 500 V AC Rated insulation voltage 500 V Pollution degree 2 Surge voltage category III 05/18/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/2906061 Hybrid motor starter - ELR H3-IES-PT-24DC/500AC-06-T - 2906061 Technical data General Safety Integrity Level according to IEC 61508 SIL 3 (safe shutdown) SIL 2 (motor protection) Category acc. to EN ISO 13849 3 Performance level according to ISO 13849 e Dimensions Width 22.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) 5 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Degree of protection IP20 UL data Short-circuit current rating (SCCR) 100 kA (500 V AC (30 A CC/30 A J (high fault) fuse)) 5 kA (500 V AC (20 A RK5 (standard fault) fuse)) Classifications eCl@ss eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 ETIM ETIM 5.0 EC001037 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals ATEX 05/18/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/2906061 Hybrid motor starter - ELR H3-IES-PT-24DC/500AC-06-T - 2906061 Approvals Approvals submitted Approval details UL Listed  cUL Listed  cULus Listed  Drawings Output current [A] Diagram 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2 0,1 = aligned with 20 mm spacing = aligned without spacing 5 10 20 30 40 50 60 70 Ambient temperature [°C] Derating curve Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 05/18/2015   Page 5 / 5