2906223

https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 2 PDTs. Input voltage: 12 V DC Product Description Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4055626047805 Weight per Piece (excluding packing) 68.000 g Custom tariff number 85364110 Country of origin China Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Dimensions Width 16 mm Height 93 mm 11/06/2019   Page 1 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Technical data Dimensions Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 (Relay base) RT III (Relay) Coil side Nominal input voltage UN 12 V DC Input voltage range in reference to UN see diagram Typical input current at UN 33 mA Typical response time 8 ms Typical release time 10 ms Coil voltage 12 V DC Protective circuit Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.4 W Contact side Contact type 2 PDT Type of switch contact Single contact Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 10 mA) Min. switching current 10 mA (At 5 V) Maximum inrush current 25 A (20 ms, N/O contact) Limiting continuous current 8 A (see diagram) Interrupting rating (ohmic load) max. 192 W (at 24 V DC) 96 W (at 48 V DC) 60 W (at 60 V DC) 44 W (at 110 V DC) 57 W (at 220 V DC) 2000 VA (for 250 V AC) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 250 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 250 V, AC15) 11/06/2019   Page 2 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Technical data General Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life approx. 3x 10 cycles Service life, electrical see diagram Mounting position any Assembly instructions In rows with zero spacing 7 Connection data Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 16 (solid) 26 ... 16 (flexible) Connection data 2 Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) Conductor cross section AWG 26 ... 16 (solid) 26 ... 16 (flexible) Standards and Regulations Standards/regulations DIN EN 50178 Rated surge voltage 6 kV Insulation Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts. Pollution degree 2 Overvoltage category III 11/06/2019   Page 3 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram DC coils 11/06/2019   Page 4 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Diagram Operating voltage range 11/06/2019   Page 5 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Diagram Interrupting rating 11/06/2019   Page 6 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Diagram Contact derating 11/06/2019   Page 7 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Diagram Electrical service life 11/06/2019   Page 8 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Diagram Service life reduction factor Articles in set Relay base - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Single relay - REL-MR- 12DC/21-21 - 2961257 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 12 V DC     11/06/2019   Page 9 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Articles in set Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122334 11/06/2019   Page 10 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC      TR_TS_D_00573_c EAC      TR_TS_S_00010_c Accessories Accessories End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     11/06/2019   Page 11 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Accessories Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     11/06/2019   Page 12 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Accessories Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-6 - 3030336 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-6 BU - 3036932 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-6 GY - 3032237 Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray     Plug-in bridge - FBS 2-8 - 3030284 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red     11/06/2019   Page 13 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Accessories Plug-in bridge - FBS 2-8 BU - 3032567 Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-8 GY 7042 - 3032541 Bridge for potential distribution     Marker carriers Marker carriers - STP 5-2 - 0800967 Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4 can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 15:UNBEDRUCKT - 0811972 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5     11/06/2019   Page 14 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Accessories Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm, Number of individual labels: 32     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm, Number of individual labels: 32     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Spare parts Relay base - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     11/06/2019   Page 15 / 16 https://www.phoenixcontact.com/us/products/2906223 Relay Module - RIF-1-RPT-LDP-12DC/2X21 - 2906223 Accessories Single relay - REL-MR- 12DC/21-21 - 2961257 Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 12 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 ... 24 V DC ±20 %     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/06/2019   Page 16 / 16