2906224

https://www.phoenixcontact.com/us/products/2906224 Relay Module - RIF-1-RPT-LDP-12DC/1X21 - 2906224 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket. Contact type: 1 PDT. Input voltage: 12 V DC     Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 68.0 g Custom tariff number 85364110 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 16 mm Height 93 mm Depth 75 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 12 V DC Input voltage range in reference to UN see diagram 10/29/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/2906224 Relay Module - RIF-1-RPT-LDP-12DC/1X21 - 2906224 Technical data Coil side Typical input current at UN 33 mA Typical response time 8 ms Typical release time 10 ms Coil voltage 12 V DC Protective circuit Damping diode Operating voltage display Yellow LED Contact side Contact type 1 PDT Contact material AgNi Maximum switching voltage 250 V AC/DC Minimum switching voltage 12 V (at 10 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 50 A (20 ms, N/O contact) Limiting continuous current 11 A (see diagram) Interrupting rating (ohmic load) max. 264 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 2750 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) AWG conductor cross section 26 ... 16 Connection data output side 10/29/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/2906224 Relay Module - RIF-1-RPT-LDP-12DC/1X21 - 2906224 Technical data Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 1.5 mm² Conductor cross section flexible 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1 mm² (Ferrule with plastic sleeve) 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) AWG conductor cross section 26 ... 16 General Type of note Notes on operation Note FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection IP20 (Relay socket) RT III (Relay) Mechanical service life Approx. 3 x 10 cycles Standards/regulations DIN EN 50178 7 IEC 62103 Rated surge voltage/insulation 6 kV/safe isolation Rated insulation voltage 250 V AC Pollution degree 2 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Articles in set Relay socket - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     10/29/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/2906224 Relay Module - RIF-1-RPT-LDP-12DC/1X21 - 2906224 Articles in set Single relay - REL-MR- 12DC/21HC - 2961309 Plug-in miniature power relay, with power contact for high continuous currents, 1 PDT, input voltage 12 V DC     Plug-in module - RIF-LDP-12-24 DC - 2900939 Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 - 24 V DC ±20%     Retaining bracket - RIF-RH-1 - 2900953 Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay     Classifications eCl@ss eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 ETIM ETIM 5.0 EC001437 Drawings 10/29/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/2906224 Relay Module - RIF-1-RPT-LDP-12DC/1X21 - 2906224 22 12 24 14 21 11 A2- Diagram Coil voltage U/UN Circuit diagram A1+ DC coils 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 20 30 40 80 50 60 70 Ambient temperature [°C] DC coils AC coils Operating voltage range Diagram Diagram 10 6 4 2 1 0,5 0,3 0,2 0,1 10 20 30 50 70 100 200 Switching voltage [V] 300 AC, ohmic load DC, ohmic load DC, L/R = 40 ms Interrupting rating Limiting continuous current per contact [A] Switching current [A] 20 13 12 11 10 9 8 7 6 5 4 3 2 1 20 30 40 50 60 70 DC coil Ambient temperature [°C] AC coil DC coil, jumper between 11 and 21 AC coil, jumper between 11 and 21 80 Contact derating Diagram 10 7 10 6 Diagram 1 10 10 2 5 Reduction factor Cycles 1 0,9 0,8 0,7 0,6 0,5 0,4 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0,3 1 0,9 Switching current [A] 0,8 0,7 0,6 0,5 0,4 0,3 0,2 COS j 1 250 V AC, ohmic load (DC coils) 2 250 V AC, ohmic load (AC coils) Electrical service life Service life reduction factor 10/29/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/2906224 Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/29/2015   Page 6 / 6