2906234

https://www.phoenixcontact.com/au/products/2906234 Current transformer - PACT RCP-4000A-UIRO-PT-D95 - 2906234 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Set consisting of a 4-way signal conditioner with push-in connection technology and a Rogowski coil 300 mm in length/95 mm in diameter for AC current measurement on busbars and power lines. The signal conditioner outputs 8 different standard signals on the output side and has one switching output. Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626048284 Weight per Piece (excluding packing) 400.600 g Country of origin Germany Sales Key CK4A12 Technical data Dimensions Width 6.2 mm Height 110.5 mm Depth 120.5 mm Ambient conditions Ambient temperature (operation) -30 °C ... 80 °C (Measuring coil) -40 °C ... 70 °C (Measuring transducer) Ambient temperature (storage/transport) -40 °C ... 80 °C (Measuring coil) -40 °C ... 85 °C (Measuring transducer) Maximum altitude > 4000 m Permissible humidity (operation) 5 % ... 95 % (non-condensing) Measuring coil degree of protection IP67 (not assessed by UL) Measuring transducer degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. 07/16/2019   Page 1 / 5 https://www.phoenixcontact.com/au/products/2906234 Current transformer - PACT RCP-4000A-UIRO-PT-D95 - 2906234 Technical data Measuring transducer supply Nominal supply voltage 24 V DC Nominal supply voltage range 9.6 V DC ... 30 V DC Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load) Measuring coil input data Frequency measuring range 40 Hz ... 20000 Hz Position error 100 kΩ Measuring coil signal output Output signal (at 50 Hz) 100 mV (no load, at 1,000 A) Output voltage (in no-load operation) VOUT = M * dI/dt Output voltage (sinusoidal, in no-load operation) 100 mV (VOUT = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A)) Measuring transducer signal output Current output signal 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 2 mA ... 10 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Voltage output signal 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 1 V ... 5 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Load/output load current output ≤ 600 Ω (20 mA) General data, measuring coil Length of measuring coil 300 mm Diameter of measuring coil 8.3 mm ±0.2 mm Length of signal cable 3000 mm Conductor structure signal line 2x 0.22 mm (Signal (tinned)) 1x 0.22 mm (Shielding (tinned)) Coil material Elastollan Housing material PC 07/16/2019   Page 2 / 5 https://www.phoenixcontact.com/au/products/2906234 Current transformer - PACT RCP-4000A-UIRO-PT-D95 - 2906234 Technical data General data, measuring coil Insulation double insulation Rated insulation voltage 1000 V AC (rms CAT III) 600 V AC (rms CAT IV) Test voltage 10.45 kV (DC / 1 min.) Basic accuracy