2906300

https://www.phoenixcontact.com/gb/products/2906300 DC/DC converters - UNO-PS/350-900DC/24DC/60W - 2906300 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched UNO DC/DC converter with wide range input, for DIN rail mounting, input: 350 ... 900 V DC, output: 24 V DC/60 W Product Description UNO DC/DC converters with basic functionality With the DC/DC converters from the UNO POWER range, the control cabinet is supplied directly from the photovoltaic system. This saves installation costs and increases the efficiency of the system. Why buy this product  Wide input voltage range  Direct field installation  UL 1741-certified DC/DC converter  Minimal space required in the control box  Simplified startup Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626062648 Weight per Piece (excluding packing) 316.900 g Custom tariff number 85044030 Country of origin Germany Technical data Dimensions Width 55 mm Height 90 mm Depth 84 mm Ambient conditions Degree of protection IP20 12/28/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/2906300 DC/DC converters - UNO-PS/350-900DC/24DC/60W - 2906300 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage range 350 V DC ... 900 V DC Input voltage range 300 V DC ... 1000 V DC Dielectric strength maximum ≤ 1050 V DC Current consumption 0.19 A (350 V DC) 0.07 A (1000 V DC) Inrush surge current < 1 A (typical) Choice of suitable circuit breakers 1 A (Characteristic gPV or comparable) Output data Nominal output voltage 24 V DC ±1 % Nominal output current (IN) 2.5 A (-25°C ... 55°C) Derating 55 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series No Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Residual ripple < 20 mVPP (with nominal values) Output power 60 W Typical response time 90 % Insulation voltage input/output 8 kV DC (type test) 3 kV DC (routine test) Protection class II MTBF (IEC 61709, SN 29500) > 1160000 h (40°C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Alignable: 0 mm horizontally, 30 mm vertically Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² 12/28/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/2906300 DC/DC converters - UNO-PS/350-900DC/24DC/60W - 2906300 Technical data Connection data, input Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 8 mm Screw thread M3 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 8 mm Screw thread M3 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Noise immunity EN 61000-6-2:2005 Standards/regulations EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 Standard - IEC 62109-1 Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Limitation of mains harmonic currents EN 61000-3-2 UL approvals UL 1741 IEC 62109-1 Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) 15 Hz ... 150 Hz, 2.3g, 90 min. Low Voltage Directive Conformance with LV directive 2006/95/EC Approval - requirement of the semiconductor industry with regard to mains voltage dips EN 61000-4-11 Information technology equipment - safety (CB scheme) CB Scheme Overvoltage category (IEC 62109-1) II 12/28/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/2906300 DC/DC converters - UNO-PS/350-900DC/24DC/60W - 2906300 Drawings Block diagram + + + - - Classifications eCl@ss eCl@ss 5.1 27242213 eCl@ss 6.0 27049005 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 5.0 EC002540 ETIM 6.0 EC002540 UNSPSC UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / IECEE CB Scheme / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 476951 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 476951 12/28/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/2906300 DC/DC converters - UNO-PS/350-900DC/24DC/60W - 2906300 Approvals EAC      7500651.22.01.00242 IECEE CB Scheme    http://www.iecee.org/  US-27376-M1-UL cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Fuse terminal block Fuse modular terminal block - UK 10,3-HESI 1000V - 3211236 Fuse terminal block, for cartridge fuse insert 10.3 x 38 mm, cross section: 1.5 - 25 mm², AWG: 16 - 4, width: 18 mm, color: Black     Redundancy module Redundancy module - UNO-DIODE/5-24DC/2X10/1X20 - 2905489 Redundancy module, 5 V - 24 V DC, 2 x 10 A, 1 x 20 A.     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/28/2016   Page 5 / 5