https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Single-channel output loop-powered 2-way repeater power supply with plug-in connection technology for
the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection
technology.
Product Description
Single-channel output loop-powered 2-way repeater power supply with plug-in connection technology for the electrical isolation and filtering of analog
signals. The output loop-powered isolator enables operation at an active analog input card with a supply voltage of 6 V DC ... 30 V DC. The isolator
and the connected sensors are supplied via the current loop of the controller. Input signal = output signal: 0(4) mA to 20 mA. The measuring transducer
supports NFC communication.
Key Commercial Data
Packing unit
1
GTIN
GTIN
4055626077932
Custom tariff number
85437090
Technical data
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
04/13/2017 Page 1 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Technical data
Input data
Voltage dissipation
5V
Power supply
Supply voltage range
9.6 V DC ... 30 V DC (no separate supply voltage necessary)
Power consumption
1.4 W
Connection data
Connection method
Push-in connection
Single conductor/terminal point, solid, with ferrule, min.
0.14 mm²
Single conductor/terminal point, solid, with ferrule, max.
2.5 mm²
Single conductor/terminal point, solid, without ferrule, min.
0.14 mm²
Single conductor/terminal point, solid, without ferrule, max.
2.5 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Stripping length
10 mm
General
No. of channels
1
Maximum transmission error
≤ 0.1 % (of final value)
Maximum temperature coefficient
≤ 0.001 %/K (of measured value/1 V input voltage)
Limit frequency (3 dB)
100 Hz
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
300 V
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color
gray
Housing material
PBT
Mounting position
any
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
04/13/2017 Page 2 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Technical data
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
PWR IN+
OUT
IN
Sensor / Field
Pictogram
TI+
+ 1
1
PWR OUT 1+
PLC / DCS
TI–
5 +
5
PWR IN 1+
2-wire
OUT I-
PWR IN+
2
– 2
3
TI+
+ 3
passive
IN 1–
PWR OUT 2+
6 –
6
TI–
7 +
7
OUT 1–
PWR IN 2+
2-wire
OUT I-
4
passive
– 4
IN I 2–
PWR
active
max.
30VDC
8 –
8
I
PWR
active
max.
30VDC
POWER
OUT I 2–
POWER
OUT
IN
I
Zone 2
Classifications
eCl@ss
eCl@ss 4.0
27210120
eCl@ss 4.1
27210120
eCl@ss 5.0
27210120
eCl@ss 5.1
27210120
eCl@ss 6.0
27210120
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
Approvals
Approvals
04/13/2017 Page 3 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Approvals
Approvals
UL Listed / cUL Listed / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cULus Listed
Accessories
Accessories
Device marking
Marker for end clamp - UCT-EM (30X5) - 0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: snapped into marker carrier, Lettering field: 30
x 5 mm
04/13/2017 Page 4 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Accessories
Marker for end clamp - UCT-EM (30X5) YE - 0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: snapped into marker carrier, Lettering field: 30
x 5 mm
Plastic label - UC-EMLP (15X5) - 0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, Mounting type: Adhesive, Lettering field: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE - 0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, Mounting type: Adhesive, Lettering field: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR - 0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, Mounting type: Adhesive, Lettering field: 15 x 5 mm
Plastic label - US-EMLP (15X5) - 0828790
Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, Mounting
type: Adhesive, Lettering field: 15 x 5 mm
04/13/2017 Page 5 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Accessories
Plastic label - US-EMLP (15X5) YE - 0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, Mounting
type: Adhesive, Lettering field: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR - 0828874
Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, Mounting
type: Adhesive, Lettering field: 15 x 5 mm
Labeled device marker
Marker for end clamp - UCT-EM (30X5) CUS - 0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
snapped into marker carrier, Lettering field: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, Mounting type:
snapped into marker carrier, Lettering field: 30 x 5 mm
Plastic label - UC-EMLP (15X5) CUS - 0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
04/13/2017 Page 6 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Accessories
Plastic label - UC-EMLP (15X5) YE CUS - 0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR CUS - 0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
Plastic label - US-EMLP (15X5) CUS - 0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE CUS - 0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR CUS - 0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, Mounting type: Adhesive,
Lettering field: 15 x 5 mm
Terminal marking
04/13/2017 Page 7 / 8
https://www.phoenixcontact.com/us/products/2906447
Loop-powered isolators - MINI MCR-2-RPS-I-I-OLP-PT - 2906447
Accessories
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, Mounting type: Adhesive,
Lettering field: continuous x 5 mm
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
04/13/2017 Page 8 / 8
