2906834

https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fine surge protection with integrated status indicator for a 2-wire floating signal circuit. Why buy this product  Space-saving installation due to the narrow overall width of 6.2 mm  Signaling without additional auxiliary power, thanks to the mechanical status indicator  Optional remote signaling module monitors up to 40 items, without additional wiring  Safe behavior in the event of overload, thanks to the integrated disconnect device  Fine surge protection by means of suppressor diode Key Commercial Data Packing unit 1 GTIN GTIN 4055626135977 Custom tariff number 85363010 Technical data Dimensions Height 92 mm Width 6.2 mm Depth 69.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C 04/13/2017   Page 1 / 6 https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 (with end cover) General Housing material PBT Flammability rating according to UL 94 V-0 Color traffic grey A RAL 7042 Mounting type DIN rail: 35 mm Design Rail-mountable module, one-piece Direction of action Line-Earth Ground Protective circuit IEC test classification C3 Nominal voltage UN 24 V DC Maximum continuous voltage UC 30 V DC Rated current 10 A (60°C) Operating effective current IC at UC ≤ 5 µA Nominal discharge current In (8/20) µs (core-GND) 150 A Voltage protection level Up (core-GND) ≤ 50 V (C3 - 25 A) ≤ 50 V (C3 - 30 A) Response time tA (core-earth) ≤ 1 ns Input attenuation aE, asym. typ. 0.3 dB (≤ 520 kHz / 150 Ω) Cut-off frequency fg (3 dB), asym. (GND) in 150 Ohm system typ. 1.7 MHz Capacity (Core-GND) 1.5 nF Resistance in series ≤ 100 mΩ Surge protection fault message optical Impulse durability (conductor-GND) C3 - 30 A Connection data Connection method Screw connection Connection method IN Screw terminal blocks Connection method OUT Screw terminal blocks Screw thread M3 Tightening torque 0.5 Nm ... 0.6 Nm Stripping length 8 mm Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section solid 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 12 04/13/2017   Page 2 / 6 https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Technical data Standards and Regulations Standards/specifications IEC 61643-21 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 EN 61643-21 2001 + A1:2009 + A2:2013 Drawings Diagram Dimensional drawing 92 6,2 I [A] 10 8 4 62 69,5 6 2 40 50 60 70 80 T [°C] 90 Circuit diagram 1 3 protected unprotected 4 2 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130807 eCl@ss 7.0 27130807 eCl@ss 8.0 27130807 eCl@ss 9.0 27130807 ETIM ETIM 2.0 EC000943 ETIM 3.0 EC000943 ETIM 4.0 EC000943 ETIM 5.0 EC000943 04/13/2017   Page 3 / 6 https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Classifications ETIM ETIM 6.0 EC000943 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 138168 Accessories Accessories Labeled terminal marker Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     04/13/2017   Page 4 / 6 https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Accessories Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Terminal marking Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Zack Marker strip, flat - ZBF 6/WH-100:UNBEDRUCKT - 0808736 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap into flat marker groove, for terminal block width: 6.2 mm, Lettering field: 5.15 x 6.15 mm     Additional products 04/13/2017   Page 5 / 6 https://www.phoenixcontact.com/us/products/2906834 Surge protection device - TTC-6-TVSD-D-24DC-UT-I - 2906834 Accessories Remote signaling set - TTC-6-FMRS-UT - 2907810 Module for floating remote signaling of neighboring surge protective devices from the TERMITRAB complete product range.     Cover - TTC-6-LCP - 2908729 End cover for terminating a row of TERMITRAB complete TTC-6... terminal blocks     Shield connection - SSA 3-6 - 2839295 shield fast connections for conductor diameter 3 - 6 mm. Potential connection cable: 200 mm, black     Shield connection - SSA 5-10 - 2839512 Shield fast connection for conductor diameters 5 - 10 mm. Potential connection cable: 200 mm, black     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/13/2017   Page 6 / 6