2906917

PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Analog input module for PLC logic logic modules (Generation 2 only), single-channel, signal type (4 mA ... 20 mA, 0 mA ... 20 mA, 0 V ... 10 V, 2 V ... 10 V) can be configured via DIP switch, Push-in connection Commercial data Item number 2906917 Packing unit 1 pc Minimum order quantity 1 pc Sales key C424 Product key CK2622 Catalog page Page 432 (C-5-2019) GTIN 4055626153780 Weight per piece (including packing) 74.8 g Weight per piece (excluding packing) 53.3 g Customs tariff number 85389099 Country of origin DE Jan 8, 2024, 9:09 AM Page 1 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Technical data Notes General For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with thirdparty products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. Product properties Product type Extension module Product family PLC logic Operating mode 100% operating factor Insulation characteristics Insulation Basic insulation Insulation characteristics: Air clearances and creepage distances Insulation Basic insulation Overvoltage category III Pollution degree 2 Electrical properties Air clearances and creepage distances Rated insulation voltage 50 V Rated surge voltage 0.5 kV Supply Rated control circuit supply voltage US 24 V DC Rated control supply voltage range with reference to US 0.8 ... 1.1 Rated control supply current IS 13 mA Protective circuit Reverse polarity protection Surge protection Input data Analog current input Number of inputs 1 Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Input resistance current input 40 Ω Maximum temperature coefficient 0.01 %/K Maximum transmission error 1% Surge voltage protection > 33 V Resolution 10 bit (scaled to 0 to 1000) Analog voltage input Jan 8, 2024, 9:09 AM Page 2 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Number of inputs 1 Voltage input signal 0 V ... 10 V 2 V ... 10 V Input resistance of voltage input > 120 kΩ Maximum temperature coefficient 0.01 %/K Maximum transmission error 1% Surge voltage protection > 33 V Resolution 10 bit (scaled to 0 to 1000) Output data Digital Output name Digital output Switching voltage range 5 V DC ... 30 V DC Switching current ≤ 3 mA Connection data Connection method Push-in connection Stripping length 10 mm Number of connections 4 Conductor cross section rigid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Signaling Operating voltage display Green LED Error indication Red LED Dimensions Width 6.2 mm Height 80 mm Depth 95 mm Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -20 °C ... 50 °C Ambient temperature (storage/transport) -20 °C ... 70 °C Approvals CE Certificate CE-compliant UL, USA/Canada Identification UL 508 Listed Jan 8, 2024, 9:09 AM Page 3 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Standards and regulations Air clearances and creepage distances Standards/regulations DIN EN 50178 Mounting Mounting type DIN rail mounting Assembly instructions in rows with zero spacing Mounting position any Jan 8, 2024, 9:09 AM Page 4 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Drawings Block diagram PLC logic Logic module PLC-V8C/.. OUT IN 1 Data- 5 6 Data+ µC D A 2 Sensor / Field U,I + + 24V 4-wire 3 4 US GND U,I - Jan 8, 2024, 9:09 AM Page 5 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2906917  EAC Approval ID: RU*DE.*08.B.01517/19  UL Listed  cUL Listed Approval ID: FILE E 238705 Approval ID: FILE E 238705 cULus Listed Jan 8, 2024, 9:09 AM Page 6 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Classifications ECLASS ECLASS-11.0 27242201 ECLASS-13.0 27242201 ECLASS-12.0 27242201 ETIM ETIM 9.0 EC001420 UNSPSC UNSPSC 21.0 32151600 Jan 8, 2024, 9:09 AM Page 7 (8) PLC-APT-UI-IN - Analog module 2906917 https://www.phoenixcontact.com/us/products/2906917 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:09 AM Page 8 (8)