2907064

https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Multifunctional process indicator inside the control panel housing for monitoring and displaying analog measurement data. Universal inputs permit connection of current, voltage, RTDs, and TCs. Two relay changeover contact outputs and one analog output. Product Description Multifunctional process indicator inside the control panel housing for monitoring and displaying analog measurement data. Dual-conductor sensors can be powered with the integrated measuring transducer supply. Universal inputs permit connection of current, voltage, RTDs, and TCs. Limit values can be monitored and relays can be switched. The analog output allows you to transmit process signals. A color change in the event of a fault supports the detection of alarm conditions. 5-digit, 7-segment LC display, with backlight, 1 universal input, 2 relays, min./max. value memory, linearization table, digital status output (open collector) Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626204666 Weight per Piece (excluding packing) 539.800 g Custom tariff number 90303330 Country of origin Germany Technical data Dimensions Width 96 mm Height 48 mm Depth 151.8 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude < 2000 m (Above sea level) Degree of protection IP65 from the front 04/17/2018   Page 1 / 6 https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Technical data Input data Description of the input Universal input Number of inputs 1 Current input signal 0 mA ... 20 mA +10 % 4 mA ... 20 mA +10 % Max. input current < 150 mA Input signal Current Input resistance current input 10 Ω Transmitter supply voltage > 16 V (22 mA) Transmitter supply voltage range 22.8 V ... 27.6 V (No-load) Transmitter supply current < 30 mA (Short-circuit and overload protection) Available input sources Resistance thermometers Sensor types (RTD) that can be used Pt, Ni, Cu sensors Connection technology 2, 3, 4-wire Description of the input Universal input Voltage input signal 0 V ... 10 V 2 V ... 10 V 0 V ... 5 V 0 V ... 1 V 1 V ... 5 V -1 V ... 1 V -10 V ... 10 V -30 V ... 30 V -100 mV ... 100 mV max. input voltage ± 35 V (≥ 1 V) Input signal Voltage Input resistance of voltage input > 1 MΩ Available input sources Thermocouples Sensor types that can be used (TC) J, K, T, N, B, S, R, U. L, C, D Output data Output name Current output Number of outputs 1 Configurable/programmable Yes Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Max. output current < 22 mA Load/output load current output ≤ 500 Ω (22 mA) Ripple < 10 mVPP (500 Ω) D/A resolution 13 bit Output name Voltage output Voltage output signal 0 V ... 10 V 04/17/2018   Page 2 / 6 https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Technical data Output data 2 V ... 10 V 0 V ... 5 V 1 V ... 5 V Max. output voltage < 11 V Ripple < 10 mVPP (1000 Ω) D/A resolution 13 bit Switching output Output name Relay output Contact type 2 PDT Minimum switching voltage 12 V Maximum switching voltage 30 V DC (3 A) 230 V AC (3 A) Min. switching current 10 mA Output name Transistor output, active Output description Open collector output Number of outputs 1 Contact type Transistor Maximum switching voltage 28 V Max. switching current 3A 200 mA Power supply Supply voltage range 24 V AC/DC ... 230 V AC/DC (-20 % ... +10 %, 50 Hz ... 60 Hz) Power consumption ≤ 6.9 W General Test voltage 2500 V Protection class I Overvoltage category II Degree of pollution 2 Test voltage input/output 500 V Test voltage input/power supply 2500 V Test voltage output/power supply 2500 V Noise emission IEC 61326, class A Noise immunity IEC 61326 / NAMUR NE 21 Housing material PC-GF10 Mounting position Max. viewing angle range +/- 45° from the centre line of the display in every direction Conformance CE-compliant UL, USA/Canada UL 61010 Recognized CSA CSA GP GL GL EMC 1 C 04/17/2018   Page 3 / 6 https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Technical data Standards and Regulations Noise emission IEC 61326, class A Noise immunity IEC 61326 / NAMUR NE 21 Conformance CE-compliant UL, USA/Canada UL 61010 Recognized CSA CSA GP GL GL EMC 1 C Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Block diagram Pictogram Sensor / Field PWR 1.1 IN+ OUT IN 2-wire US US US 1.4 Out IOut I+ 1.4 4-wire Out I- 2.4 >1V Out U+ 1.3 4-wire 2.4 Out UOut U+ 2.3 4-wire Out U- 2.4 1.3 2.3 R.13 R.13 R.22 2.3 2.4 R.21 4.1 1.1 4.2 1.2 4.3 4.4 1.4 2x 2.1 2.2 4.3 + Passive 4.4 R.12 R.12 R.11 R.11 - POWER U,I DI OUT IN R.22 R.23 2.4 R.21 2.2 2.3 2.4 2x DI R.23 2.1 Power 24V...230V AC/DC U,I POWER L/+ N/PE Classifications eCl@ss eCl@ss 4.0 27210301 eCl@ss 4.1 27210301 eCl@ss 5.0 27210301 eCl@ss 5.1 27210301 eCl@ss 6.0 27210301 eCl@ss 7.0 27210301 eCl@ss 8.0 27210301 eCl@ss 9.0 27210301 ETIM ETIM 2.0 EC001426 ETIM 3.0 EC001426 04/17/2018   Page 4 / 6 https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Classifications ETIM ETIM 4.0 EC001426 ETIM 5.0 EC001426 ETIM 6.0 EC001426 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / DNV GL / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 198586 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 198586 CSA    http://www.csagroup.org/services-industries/product-listing/  2879105  http://exchange.dnv.com/tari/  42233-15 HH  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   DNV GL  cULus Recognized   Accessories Accessories Programming adapter 04/17/2018   Page 5 / 6 https://www.phoenixcontact.com/gb/products/2907064 Digital display - FA MCR-D-TUI-UI-2REL-UP - 2907064 Accessories Programming adapter - MCR-PAC-T-USB - 2309000 Programming adapter with USB and T port interface, 2.4 m for programming FA MCR-..., MCR-...-LP-..., and MCR-...HT-... modules     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/17/2018   Page 6 / 6