2907160

TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. TRIO UPS - UPS with integrated power supply, USB (Modbus/RTU), DIN rail mounting, Push-in connection, input: 1-phase, output: 24  V DC / 5 A Product description Supply DC loads reliably and save space with the TRIO uninterruptible power supplies. An input grid is no longer necessary for startup. Connected industrial PCs can be shut down easily via the integrated USB interface. Your advantages • Space saving: Combination of UPS module and power supply in the same housing • Long buffer times, thanks to large selection of VRLA energy storage systems • USB interface for connection to higher-level controllers such as industrial PCs • Startup from energy storage possible, even without mains input • Universal range of possible applications, thanks to a comprehensive package of approvals and an extended temperature range • Easy installation, thanks to push-in connection technology Commercial data Item number 2907160 Packing unit 1 pc Minimum order quantity 1 pc Sales key CM25 Product key CMUO13 Catalog page Page 354 (C-4-2019) GTIN 4055626166575 Weight per piece (including packing) 957.8 g Weight per piece (excluding packing) 741 g Customs tariff number 85044095 Country of origin CN Jan 8, 2024, 9:13 AM Page 1 (18) TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Technical data Input data Input voltage range 100 V AC ... 240 V AC -15 % ... +10 % Voltage type of supply voltage AC Inrush current < 16 A Inrush current integral (I2t) < 0.43 A2s Frequency range (fN) 50 Hz ... 60 Hz (±10 %) Mains buffering time ≥ 15 ms (120 V AC) Switch-on time typ. 60 ms Typical current consumption 3.3 A (100 V AC) Input fuse 6.3 A (slow-blow, internal) Signal Bat.-Start Connection labeling 3.6 Signalization designation Bat.-Start Low signal Connection to SGnd with < 2.7 kΩ High signal Open (> 200 kΩ between Bat.-Start and SGnd) Signal Remote Connection labeling 3.5 Signalization designation Remote Low signal Connection to SGnd with < 2.7 kΩ High signal Open (> 35 kΩ between Remote and SGnd) Output data Efficiency typ. 85 % (120 V AC) typ. 87 % (230 V AC) typ. 96 % (Battery operation) Derating > 60 °C (2.5%/K of POut nom.) Crest factor 2.7 (120 V AC) 3.2 (230 V AC) Switch-over time < 75 ms UPS connection in parallel yes, with diode module uncoupled UPS connection in series no Energy storage device connection in parallel yes Feedback voltage resistance ≤ 35 V DC Protection against overvoltage at the output (OVP) < 30 V DC Residual ripple < 20 mV Control deviation < 0.75 % (change in load, static 10 % ... 90 %) < 1.25 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Rise time < 15 ms Permissible backup fuse B10 Jan 8, 2024, 9:13 AM Page 2 (18) TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Mains operation Output voltage 24 V DC Output voltage range 24 V DC ... 28 V DC (> 24 V constant capacity) Output current IN 5A Dynamic Boost (IDyn.Boost) 7.5 A Output power POUT (UN, IOUT = IN) 120 W Maximum no-load power dissipation < 3 W (230 V AC) Power loss nominal load max. < 19 W (230 V AC) Battery operation Output voltage UBAT -0.1 V DC Output voltage range 18 V DC ... 30 V DC Output current IN 5A Signal Alarm Connection labeling 3.2 Signalization designation Alarm Type of signaling LED red Switching output Transistor output, active Output voltage 24 V DC Continuous load current 20 mA LED status indicator red Signal Battery mode Connection labeling 3.3 Signalization designation Battery mode Type of signaling Yellow LED Switching output Transistor output, active Output voltage 24 V DC Continuous load current 20 mA LED status indicator yellow Signal DC OK Connection labeling 3.1 Signalization designation DC OK Type of signaling Green LED Switching output Transistor output, active Output voltage 24 V DC Continuous load current 20 mA LED status indicator green Signal Ready Connection labeling 3.4 Signalization designation Ready Switching output Transistor output, active Output voltage 24 V DC Jan 8, 2024, 9:13 AM Page 3 (18) TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Continuous load current 20 mA Signal supply 24 V DC, 20 mA, SGnd Connection labeling 3.7 Energy storage Nominal voltage UN 24 V DC End-of-charge voltage max. 30 V DC Charging current (Configurable) 0.2 A ... 1.5 A (-25 °C ... 40 °C) Charging current (Reduced) 1.5 A ... 0 A (40 °C ... 65 °C) Charging current (Preset) 1.2 A (-25 °C ... 40 °C) Charging current () 1.5 A Nominal capacity range 1.2 Ah ... 12 Ah Battery technology VRLA-AGM Charge characteristic curve IU0U Connection data Conductor connection Connection method Push-in connection rigid 0.2 mm² ... 4 mm² flexible 0.2 mm² ... 2.5 mm² flexible with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² flexible with ferrule with plastic sleeve 0.25 mm² ... 1.5 mm² rigid (AWG) 24 ... 12 Stripping length 10 mm Conductor connection Connection method Push-in connection rigid 0.2 mm² ... 4 mm² flexible 0.2 mm² ... 2.5 mm² flexible with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² flexible with ferrule with plastic sleeve 0.25 mm² ... 1.5 mm² rigid (AWG) 24 ... 12 Stripping length 10 mm Conductor connection Connection method Push-in connection rigid 0.2 mm² ... 1.5 mm² flexible 0.2 mm² ... 1.5 mm² flexible with ferrule without plastic sleeve 0.2 mm² ... 1.5 mm² flexible with ferrule with plastic sleeve 0.2 mm² ... 0.75 mm² rigid (AWG) 24 ... 16 Stripping length 8 mm Conductor connection Jan 8, 2024, 9:13 AM Page 4 (18) TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Connection method Push-in connection rigid 0.2 mm² ... 10 mm² flexible 0.2 mm² ... 6 mm² flexible with ferrule without plastic sleeve 0.25 mm² ... 6 mm² flexible with ferrule with plastic sleeve 0.25 mm² ... 4 mm² rigid (AWG) 24 ... 8 Stripping length 15 mm Interfaces Interface USB (Modbus/RTU) Number of interfaces 1 Connection method MINI-USB Type B Locking Screw Electrical properties Number of phases 1.00 Insulation voltage input/output 3 kV AC (type test) 1.5 kV AC (routine test) Insulation voltage output / PE 500 V AC (type test) 500 V AC (routine test) Insulation voltage input / PE 1.5 kV AC (type test) 1.5 kV AC (routine test) Product properties Product type DC UPS with integrated power supply Product family TRIO UPS MTBF (IEC 61709, SN 29500) > 1395470 h (230 V AC, at 25 °C) > 825726 h (230 V AC, at 40 °C) > 388314 h (230 V AC, at 60 °C) Insulation characteristics Protection class I Degree of pollution 2 Life expectancy (electrolytic capacitors) Current 5A Temperature 40 °C Additional text 230 V AC Dimensions Item dimensions Width 115 mm Height 130 mm Depth 60 mm Jan 8, 2024, 9:13 AM Page 5 (18) TRIO-UPS-2G/1AC/24DC/5 - Uninterruptible power supply 2907160 https://www.phoenixcontact.com/us/products/2907160 Installation dimensions Installation distance right/left 0 mm / 0 mm Installation distance top/bottom 50 mm / 50 mm Mounting Mounting type DIN rail mounting Assembly instructions alignable: horizontally 0 mm, vertically 50 mm Mounting position horizontal DIN rail NS 35, EN 60715 Material specifications Flammability rating according to UL 94 (housing / terminal blocks) V0 Housing material Metal Hood version PC Side element version Aluminum Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Ambient temperature (start-up type tested) -40 °C Maximum altitude ≤ 4000 m (> 2000 m, observe derating) Climatic class 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation) ≤ 95 % (At +25°C, non-condensing) Shock 30g, 18 ms in accordance with IEC 60068-2-27 Vibration (operation)